Bosch MUM56S40/02 User manual

Type
User manual
Moodpic 1
63,2 x 50,25mm
CMYK & GREY
Moodpic 2
98,6 x 46,7mm
CMYK & GREY
Register your new Bosch now:
www.bosch-home.com/welcome
MUZ5FW1..
de Gebrauchsanleitung
en Instruction manual
fr Mode d’emploi
it Istruzioni per l’uso
nl Gebruiksaanwijzing
da Brugsanvisning
no Bruksanvisning
sv Bruksanvisning
fiyttöohje
es Instrucciones de uso
pt Instruções de serviço
el Οδηγίες χρήσης
tr Kullanım kılavuzu
pl Instrukcja obsługi
uk Інструкція з експлуатації
ru Инструкция по эксплуатации
ar 
Robert Bosch Hausgeräte GmbH 5
For your safety
The accessories are suitable for the food processor MUM5... .
Follow the operating instructions for the food processor MUM5… .
This appliance is suitable for mincing and mixing raw or cooked meat,
bacon, poultry and fish. It must not be used for processing other objects or
substances.
Other applications are possible if the accessories approved by the
manufacturer are used.
, Safety instructions for this appliance
Risk of injury!
Do not reach into the feed tube, always use the pusher to add more
ingredients.
Do not attach/remove the mincer until the drive is at a standstill.
Important!
Use the mincer in the specified operating position only.
The mincer must be completely assembled before use. Never assemble
the mincer attachment on the base unit.
Overview
Please fold out the illustrated pages.
Fig.
1 Mincer attachment
a Threaded ring
b Perforated disc (hole diameter 4.5 mm)
c Blade
d Worm gear with driver
e Locking lever
f Seal
2 Filler tray
3 Pusher
Optional accessories
4 Fruit press attachment
5 Viennese whirl attachment
6 Grater attachment
7 Perforated disc
(hole diameter 3 mm and 6 mm)
Fig.
Operating position
Protection from overload
To prevent serious damage to your appliance
if the mincer is overloaded, the driver has
a notch (predetermined breaking point).
If an overload occurs, the driver breaks instead.
However, the driver can easily be replaced.
A new driver is available from customer service.
Unscrew fastening screw on the worm gear.
Replace driver.
Tighten fastening screw.
Operating the appliance
Thoroughly clean the mincer before using for
the first time, see “Cleaning and care”.
Assemble mincer attachment in the
indicated sequence (Fig. ). Do not fully
tighten threaded ring.
Insert seal. Note position (Fig. )!
Fig.
Press the Release button and move
the swivel arm to position 4.
Connect mincer to the drive.
Note position of the driver (1d) with
respect to the drive. If required, turn the
driver slightly.
To do this, the threaded ring must not
be screwed tightly!
en
Important information
In these instructions for use the recommended
reference values for the operating speed refer to
appliances with a 7-setting rotary switch.
For appliances with a 4-setting rotary switch
you can find the values in brackets after
the values for a 7-setting rotary switch.
MUZ5FW1_alle.book Seite 5 Donnerstag, 25. September 2014 10:16 10
6 Robert Bosch Hausgeräte GmbH
Turn mincer anti-clockwise.
Press down locking lever.
Now tighten the threaded ring.
Attach filler tray.
Place a bowl or plate under the outlet
opening.
Insert the mains plug.
Set rotary knob to setting 7 (4).
Place the food to be processed in the filling
tray.
Use the pusher to push in ingredients.
t~êåáåÖ>
aç=åçí=éêçÅÉëë=ÄçåÉëK
Tip: Process steak tartare through the mincer
twice.
After using the appliance
Switch off the appliance with the rotary
switch.
Lift up locking lever.
Rotate the mincer in a clockwise direction
and remove.
Clean mincer.
Cleaning and servicing
^ííÉåíáçå>
aç=klq=ìëÉ=~Äê~ëáîÉ=ÅäÉ~åáåÖ=~ÖÉåíëK=
pìêÑ~ÅÉë ã~ó=ÄÉ=Ç~ã~ÖÉÇK
jáåÅÉê=~åÇ=áåÇáîáÇì~ä=é~êíë=~êÉ=åçí=
ÇáëÜï~ëÜÉêJéêççÑK
Loosen threaded ring and disassemble
attachment.
Rinse individual parts by hand and dry
immediately.
Optional accessories
(available from dealers)
t~êåáåÖ>
^äï~óë=~ëëÉãÄäÉ=íÜÉ=~ÅÅÉëëçêáÉë=ïáíÜçìí=
Ää~ÇÉë=~åÇ=éÉêÑçê~íÉÇ=ÇáëÅëK=
cçääçï=~ää=áåëíêìÅíáçåë=ãÉåíáçåÉÇ=~ÄçîÉ=
ÅçåÅÉêåáåÖ=“cçê=óçìê=ë~ÑÉíó ÒI=“^ÑíÉê=ïçêâÒ=
çê “`äÉ~åáåÖ=~åÇ=ëÉêîáÅáåÖÒK
Fruit press attachment
for pressing e.g. berries, tomatoes, apples,
pears, rosehips (cook rosehips for 1 hour before
pressing). Extracted fruit pulp is especially
suitable for making jam.
Fig.
Preparation as described for mincer
attachment. Note required individual parts
and sequence when assembling the fruit
press attachment.
First undo the fastening screw as far as is
required to allow the pulp to flow out while
still moist.
Then adjust the fastening screw until the
pulp flows out with the required moisture.
Place the food to be processed in the filling
tray.
Use the pusher to push in ingredients.
Set rotary knob to setting 7 (4).
Viennese whirl attachment
for shaping biscuit dough or short pastry.
Fig.
Preparation as described for mincer
attachment. Note required individual parts
and sequence when assembling the biscuit
attachment.
Place the dough to be processed in the
filling tray. Use the pusher to push in
ingredients.
Turn rotary switch to setting 4 (2) or 5 (3)
depending on dough consistency.
Separate the shaped dough coming out
of the appliance with a pastry cutter.
Briefly switch off the food processor
if the dough comes out too quickly.
Grater attachment
for grating almonds, nuts and dried bread
or bread rolls.
t~êåáåÖ>
mêçÅÉëë=çåäó=Çêó=åìíë=~åÇ=~äãçåÇë=áå=ëã~ää=
èì~åíáíáÉë>
Fig.
Preparation as described for mincer
attachment. Note required individual parts
and sequence when assembling the grating
attachment.
Place the food to be processed in the filling
tray.
Use the pusher to push in ingredients.
Turn rotary switch to setting 3 (2) or 4 (3)
depending on hardness of the food.
en
Subject to alterations.
MUZ5FW1_alle.book Seite 6 Donnerstag, 25. September 2014 10:16 10
en
Robert Bosch Hausgeräte GmbH 5
For your safety
The accessories are suitable for the food processor MUM5... .
Follow the operating instructions for the food processor MUM5… .
This appliance is suitable for mincing and mixing raw or cooked meat,
bacon, poultry and fish. It must not be used for processing other objects or
substances.
Other applications are possible if the accessories approved by the
manufacturer are used.
, Safety instructions for this appliance
Risk of injury!
Do not reach into the feed tube, always use the pusher to add more
ingredients.
Do not attach/remove the mincer until the drive is at a standstill.
Important!
Use the mincer in the specified operating position only.
The mincer must be completely assembled before use. Never assemble
the mincer attachment on the base unit.
Overview
Please fold out the illustrated pages.
Fig.
1 Mincer attachment
a Threaded ring
b Perforated disc (hole diameter 4.5 mm)
c Blade
d Worm gear with driver
e Locking lever
f Seal
2 Filler tray
3 Pusher
Optional accessories
4 Fruit press attachment
5 Viennese whirl attachment
6 Grater attachment
7 Perforated disc
(hole diameter 3 mm and 6 mm)
Fig.
Operating position
Protection from overload
To prevent serious damage to your appliance
if the mincer is overloaded, the driver has
a notch (predetermined breaking point).
If an overload occurs, the driver breaks instead.
However, the driver can easily be replaced.
A new driver is available from customer service.
Unscrew fastening screw on the worm gear.
Replace driver.
Tighten fastening screw.
Operating the appliance
Thoroughly clean the mincer before using for
the first time, see “Cleaning and care”.
Assemble mincer attachment in the
indicated sequence (Fig. ). Do not fully
tighten threaded ring.
Insert seal. Note position (Fig. )!
Fig.
Press the Release button and move
the swivel arm to position 4.
Connect mincer to the drive.
Note position of the driver (1d) with
respect to the drive. If required, turn the
driver slightly.
To do this, the threaded ring must not
be screwed tightly!
en
Important information
In these instructions for use the recommended
reference values for the operating speed refer to
appliances with a 7-setting rotary switch.
For appliances with a 4-setting rotary switch
you can find the values in brackets after
the values for a 7-setting rotary switch.
MUZ5FW1_alle.book Seite 5 Donnerstag, 25. September 2014 10:16 10
6 Robert Bosch Hausgeräte GmbH
Turn mincer anti-clockwise.
Press down locking lever.
Now tighten the threaded ring.
Attach filler tray.
Place a bowl or plate under the outlet
opening.
Insert the mains plug.
Set rotary knob to setting 7 (4).
Place the food to be processed in the filling
tray.
Use the pusher to push in ingredients.
t~êåáåÖ>
aç=åçí=éêçÅÉëë=ÄçåÉëK
Tip: Process steak tartare through the mincer
twice.
After using the appliance
Switch off the appliance with the rotary
switch.
Lift up locking lever.
Rotate the mincer in a clockwise direction
and remove.
Clean mincer.
Cleaning and servicing
^ííÉåíáçå>
aç=klq=ìëÉ=~Äê~ëáîÉ=ÅäÉ~åáåÖ=~ÖÉåíëK=
pìêÑ~ÅÉë ã~ó=ÄÉ=Ç~ã~ÖÉÇK
jáåÅÉê=~åÇ=áåÇáîáÇì~ä=é~êíë=~êÉ=åçí=
ÇáëÜï~ëÜÉêJéêççÑK
Loosen threaded ring and disassemble
attachment.
Rinse individual parts by hand and dry
immediately.
Optional accessories
(available from dealers)
t~êåáåÖ>
^äï~óë=~ëëÉãÄäÉ=íÜÉ=~ÅÅÉëëçêáÉë=ïáíÜçìí=
Ää~ÇÉë=~åÇ=éÉêÑçê~íÉÇ=ÇáëÅëK=
cçääçï=~ää=áåëíêìÅíáçåë=ãÉåíáçåÉÇ=~ÄçîÉ=
ÅçåÅÉêåáåÖ=“cçê=óçìê=ë~ÑÉíó ÒI=“^ÑíÉê=ïçêâÒ=
çê “`äÉ~åáåÖ=~åÇ=ëÉêîáÅáåÖÒK
Fruit press attachment
for pressing e.g. berries, tomatoes, apples,
pears, rosehips (cook rosehips for 1 hour before
pressing). Extracted fruit pulp is especially
suitable for making jam.
Fig.
Preparation as described for mincer
attachment. Note required individual parts
and sequence when assembling the fruit
press attachment.
First undo the fastening screw as far as is
required to allow the pulp to flow out while
still moist.
Then adjust the fastening screw until the
pulp flows out with the required moisture.
Place the food to be processed in the filling
tray.
Use the pusher to push in ingredients.
Set rotary knob to setting 7 (4).
Viennese whirl attachment
for shaping biscuit dough or short pastry.
Fig.
Preparation as described for mincer
attachment. Note required individual parts
and sequence when assembling the biscuit
attachment.
Place the dough to be processed in the
filling tray. Use the pusher to push in
ingredients.
Turn rotary switch to setting 4 (2) or 5 (3)
depending on dough consistency.
Separate the shaped dough coming out
of the appliance with a pastry cutter.
Briefly switch off the food processor
if the dough comes out too quickly.
Grater attachment
for grating almonds, nuts and dried bread
or bread rolls.
t~êåáåÖ>
mêçÅÉëë=çåäó=Çêó=åìíë=~åÇ=~äãçåÇë=áå=ëã~ää=
èì~åíáíáÉë>
Fig.
Preparation as described for mincer
attachment. Note required individual parts
and sequence when assembling the grating
attachment.
Place the food to be processed in the filling
tray.
Use the pusher to push in ingredients.
Turn rotary switch to setting 3 (2) or 4 (3)
depending on hardness of the food.
en
Subject to alterations.
MUZ5FW1_alle.book Seite 6 Donnerstag, 25. September 2014 10:16 10
en
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

Bosch MUM56S40/02 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI