FLIR ACC60WPMS1 Quick start guide

FLIR
Brand
FLIR
Model
ACC60WPMS1
Category
PoE adapters
Type
Quick start guide

FLIR ACC60WPMS1 is a High PoE Midspan that provides up to 60 watts of power over Ethernet (PoE) to compatible network devices such as cameras and access points. It is ideal for use in powering devices that are located far from a power outlet or in areas where there is no AC power available.

The ACC60WPMS1 is easy to install and use. Simply connect the midspan to a power source using the included power cable, and then connect the PoE device to the midspan using a standard Ethernet cable. The midspan will automatically detect the connected device and provide the appropriate amount of power.

FLIR ACC60WPMS1 is a High PoE Midspan that provides up to 60 watts of power over Ethernet (PoE) to compatible network devices such as cameras and access points. It is ideal for use in powering devices that are located far from a power outlet or in areas where there is no AC power available.

The ACC60WPMS1 is easy to install and use. Simply connect the midspan to a power source using the included power cable, and then connect the PoE device to the midspan using a standard Ethernet cable. The midspan will automatically detect the connected device and provide the appropriate amount of power.

ACC60WPMS1_QSG_EN_R1
Quick Start Guide
ACC60WPMS1
High PoE Midspan
Connection
Package Contents
• High PoE Midspan
• Power Cable
• Mounting Screws (×3)
• Quick Start Guides
Dimensions
Connect the midspan to a power source using the included
power cable.
3
Up to 328ft / 100m
Front Panel
Switch / NVR*
1
2
Compatible
Network Camera*
6.0”
151mm
1.6”
39mm
2.8” / 71mm
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Information in this document is subject to change without notice. As our products are subject
to continuous improvement, FLIR Systems, Inc. and our subsidiaries reserve the right to modify
product design, specifications and prices, without notice and without incurring any obligation.
E&OE © 2017 FLIR Systems, Inc. All rights reserved.
*Not included / sold separately.
Power Status
Name Color Meaning
PWR Green
ON: The Midspan is receiving power.
OFF: The Midspan is not powered.
PoE Output
Name Color Meaning
POE Green
ON: Port is providing in-line power.
OFF: Connected device is not a PoE Powered Device
(PD).
ACC60WPMS1_QSG_EN_R1
Quick Start Guide
ACC60WPMS1
LED Indicators
Installation
Flat Mounting
Surface
Mounting
Screws (2×)
2.8”
71mm
Mounting the Midspan
Flat Mounting
Surface
0.1”
3mm
Safety Precautions
This Midspan is intended for INDOOR installation only.
Screw Distance from
Mounting Surface
• Use the Midspan with compatible FLIR cameras only. To ensure compatibility, see High
PoE midspan datasheet.
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• There are no user serviceable parts inside the Midspan. Please do not disassemble
the Midspan.
• Do not expose the Midspan to sunlight. Use the Midspan within given temperature,
humidity and voltage levels noted in the Technical Specifications section.
• Make sure to install the Midspan on a flat surface in an area that can support the
Midspan weight.
• Slots and openings in the Midspan are provided for ventilation to ensure reliable
operation of the Midspan and to protect it from overheating. These openings must
not be blocked or covered.
• Do not place any object on the Midspan.
• Midspan is rated for indoor installation only.
Technical Specifications
Name Specification
Ports 1x 10/100/1000Base-T (Data IN)
1x 10/100/1000Base-T PoE power supply (POE OUT)
PoE Standard IEEE 802.3af / 802.3at PoE / High PoE (max 60W)
PoE Power Output 54V DC, Max. 60 watts
PoE Class Class 0/1/2/3/4/5
Operating Humidity 10 ~ 90% (non-condensing)
Operating Temperature -22 ~ 149°F / -30 ~ 65°C
Power Input 100~240V AC, 50/60Hz, 1.7A Max
Weight 0.30kg / 0.65lbs
High PoE Midspan
  • Page 1 1
  • Page 2 2

FLIR ACC60WPMS1 Quick start guide

FLIR
Brand
FLIR
Model
ACC60WPMS1
Category
PoE adapters
Type
Quick start guide

FLIR ACC60WPMS1 is a High PoE Midspan that provides up to 60 watts of power over Ethernet (PoE) to compatible network devices such as cameras and access points. It is ideal for use in powering devices that are located far from a power outlet or in areas where there is no AC power available.

The ACC60WPMS1 is easy to install and use. Simply connect the midspan to a power source using the included power cable, and then connect the PoE device to the midspan using a standard Ethernet cable. The midspan will automatically detect the connected device and provide the appropriate amount of power.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents