LG LF480CE Owner's manual

Brand: LG

Model: LF480CE

Category: Mobile air conditioners

Type: Owner's manual

This manual is also suitable for

website http://www.lgservic _

LG Floor Standing-Type

Air Conditioner

OWNER'S MANUAL

thoroughly

onditioner.

ture reference after

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

• Staple your receipt to this page in the event you need it

to prove date of purchase or for warranty issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and

maintain your air conditioner properly. Just a little

preventive care on your part can save you a great deal

of time and money over the life of your air conditioner.

You'll find many answers to common problems in the

chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips first, you may not need to call for

service at all.

PRECAUTION

• Contact the authorized service technician for repair or

maintenance of this unit.

• Contact the installer for installation of this unit.

• The air conditioner is not intended for use by young

children or invalids without supervision.

• Young children should be supervised to ensure that

they do not play with the air conditioner.

• When the power cord is to be replaced, replacement

work shall be performed by authorized personnel only

using only genuine replacement parts.

• Installation work must be performed in accordance

with the National Electric Code by qualified and

authorized personnel only.

2 Floor Standing-Type Air Conditioner

Sa_Precaufions

To prevent injury to the user or other people and property damage, the following instructions

must be followed.

• Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is

classified by the following indications.

, WARNING

CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

• Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

ILWARNING-

• Installation

• There is risk of fire or electric

shock.

• Do not disassemble or repair the

product. There is risk of fire or

electric shock.

• There is risk of fire or electric

shock.

• Improper wiring or installation

may cause fire or electric shock

• There is risk of fire or electric

shock.

• There is risk of fire or electric

shock.

Owner's Manual 3

SafetyPrecautions

• There is risk of fire or electric

shock.

• There is risk of fire, electric

shock, explosion, or injury.

• Moisture may condense and wet

or damage furniture.

• There is risk of fire or electric

shock.

jj ,

• There is risk of fire, electric

shock, explosion, or injury.

• It may cause injury, accident, or

damage to the product.

• Sharp edges could cause injury.

Be especially careful of the case

edges and the fins on the

condenser and evaporator.

• Operation

• There is risk of fire or electric

shock.

• If the base collapses, the air

conditioner could fall with it,

causing property damage,

product failure, and personal

injury.

• There is risk of fire or electrical

shock.

4 Floor Standing-Type Air Conditioner

• There is risk of fire or electric

shock.

• There is risk of fire and electric

shock.

Safety Precautions

• It may cause There is risk of fire,

failure of the product, or electric

shock.

• Do not use the telephone or turn

switches on or off.

There is risk of explosion or fire

• There is risk of physical injury,

electric shock, or product failure.

• There is risk of fire or electric shock.

• There is risk of fire or failure of

product.

• There is risk of electric shock or

fire.

i _ •

• There is risk of fire or electric

shock.

• Oxygen deficiency could occur.

• There is risk of property damage,

failure of product, or electric shock.

• There is risk of fire, electric shock,

or product damage.

• There is riskof electric shock.

Owner's Manual 5

SafetyPrecautions

• There is risk of product damage or failure, or

unintended operation.

• Installation

• Low refrigerant levels may cause

failure of product.

• It may cause a problem for your

neighbors.

• This could result in personal injury and product

damage.

CAUTION

• A bad connection may cause

water leakage.

• Avoid personal injury.

• To avoid vibration or water

leakage.

• It may cause corrosion on the

product. Corrosion, particularly on

the condenser and evaporator fins,

could cause product malfunction or

inefficient operation.

• Operation

• This could harm to your health.

• There is risk of

damage or

loss of property.

6 Floor Standing-Type Air Conditioner

• It may cause product failure.

Sa_Precaufions

• There is risk of fire, electric shock,

or damage to the plastic parts of

the product.

• There is risk of personal injury

and failure of product.

• It is not sanitary and could cause

serious health issues.

• A dirty filter reduces the efficiency

of the air conditioner and could

cause product malfunction or

damage.

• They may burn or explode.

• Becarefulandavoidpersonal

injury.

• Thechemicalsin batteriescould

causeburnsor other healthhazards.

• There is risk of personal injury.

• There are sharp and moving parts

that could cause personal injury.

• There is risk of fire or explosion

• Thechemicalsin batteriescould

causeburnsor other healthhazards.

Owner's Manual 7

PriortoOperation

1. Contact an installation specialist for installation.

2. Plug in the power plug properly.

3. Use a dedicated circuit.

4. Do not use an extension cord.

5. Do not start/stop operation by plugging/unplugging the power cord.

6. If the cord/plug is damaged, replace it with only an authorized replacement part.

1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose

occupants, pets, or plants to direct airflow for a long time.

2. Due to the possibility of oxygen deficiency, ventilate the room when using the appliance together with

stoves or other heating devices.

3. Do not use this air conditioner for non-specified special purpose (e.g. preserving precision devices,

food, pets, plants, or art objects). Such use may damage your properties.

1. Do not touch the metal parts of the unit when removing the filter. Injury can occur.

2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,

leading to electric shock.

3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a

very high speed during operation. There is a possibility of injury ifthe unit's power is triggered while

cleaning inner parts of the unit.

For repair and maintenance, contact your authorized service dealer.

This symbol alerts you to the risk of electric shock.

This symbol alerts you to hazards that may cause harm to the

air conditioner.

This symbol indicates special notes.rAv[*) l[o]:;

8 Floor Standing-Type Air Conditioner

OperatingInstructions

1. Design for cooling

2. Super energy efficiency

3. Micom control

4. Whisper quiet operation

5. Wireless remote control

6.3 cooling speeds

7. Removable air filter

8. Anti-Bacteria filter

9.3 minutes delay circuit

Air Outlet

Remote Signal

Receptor

Air Intake Vent--

Vent

-- Air Intake Vent

(Rear)

Piping

Owner's Manual 9

Operating Instructions

7 9 6 2 1

8 11 10 4 3

1. START/STOP BUTTON

Operation starts when this button is pressed

and stops when the button is pressed again.

2. OPERATION MODE SELECTION

BUTTON

Used to select the operation Mode.

3. ROOM TEMPERATURE SETTING

BUTTONS

Used to select the room temperature.

4. INDOOR FAN SPEED SELECTION

Used to select fan speed in three steps-low,

High, Super High.

5. FAN OPERATION LAMP

6. COOLING OPERATION LAMP

7. SOFT DRY OPERATION LAMP

8. OUTDOOR UNIT OPERATION LAMP

9. AUTO OPERATION LAMP

10. OFF TIMER OPERATION LAMP

11. TURBO-Z OPERATION LAMP

10 Floor Standing-Type Air Conditioner

OperatingInstructions

IBIlTIME

0 LG

Operation Mode

]

Flip-updoor

(closed)

I! Cooling Operation ] ._

AutoOperation ] _.

Soft DryOperation ] (_)

START/STOP BUTTON

Operation starts when this button is

pressed and stops when the button is

pressed again.

ROOM TEMPERATURE

SETTING BUTTONS

Used to select the room temperature.

INDOOR FAN SPEED

SELECTOR

Usedto selectfan speed in 3stepslow,

high,superhigh.

TURBO-Z

Usedto start or stopthe speed

cooling.(Speedcoolingoperates

super highfanspeed in cooling mode.)

AUTO AIRFLOW

DIRECTION CONTROL

BUTTON

Thehorizontallouversswingupanddown.

TURBO-Z

Wireless Remote Control Puts all functions at your fingertips

Handling the remote control

• Aim atthe signal receptor onthe floor standing type air conditioner when operating.

• The remote control signal can be received at a distance of up to about 7meters.

• Be sure that there are no obstructions between the remote control and the signal receptor.

• Do notdrop or throw the remote control.

• Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat

source.

Owner's Manual 11

OperatingInstructions

O ON/OFF TIMER BUTTONS oNG OFF

Used to set the time of starting and

stopping operation.

TIME SETTING BUTTONS

Used to adjust the time.

TIMER SET/CANCEL BUTTONS

Used to set the timer when the desired SET_'_CANCEL

time is obtained and to cancel the Timer 0

operation.

Q IMPLE OFF TIMER SET ®

BUTTON

Each time the button is pressed, the mode

is changed inthe following process.

Time set (1, 2, 3, 4, 5, 6, 7 hurs)

If you select "0" the off Timer function will

be cancelled.

O ENERGY SAVING OPERATION ®

BUTTON (Not Available)

_1 °C_ °F SWITCHING BUTTON °C/°F

Used to switch temperature reading from

Centigrade to Fahrenheit and viceversa.

_ ESET BUTTON

Used prior to resetting time or after

replacing batteries.

o RESET

O NDOOR FAN OPERATION +

BUTTON

Used to circulate the room air without

cooling

or heating (turns indoor fan on/off).

_! PERATION MODE _Ao

SELECTION BUTTON

Used to select the operation mode.

AUTO AIRFLOW DIRECTION

CONTROL BUTTON

The vertical louvers swing rightand left.

12 Floor Standing-Type Air Conditioner

OperatingInstructions

1. How to mount onto a wall

Use the screws to secure the holder to the wall or attach the holder side of indoor unit.

2.To insert the remote control to the holder.

Insert

How to insert batteries

1. Remove the cover from the back of the

remote controller.

• Slide the cover according to the arrow

direction.

2. Insert two batteries.

• Be surethat the (+)and (-) directions are

correct.

• Be surethat both batteries are new.

3. Re-attach the cover.

• Slide the cover into back position.

• Do not use rechargeable batteries

such batteries as different from

standard dry cells in shape,

dimensions, and performance.

• Change the batteries with a new

one if the remote control does not

work properly after using for an

extended length of time.

"FLIP TYPE" Remote controller which deliver along with the Set, Can't adjust with space

provided inside the Inlet Grill.

Owner's Manual 13

Operating Instructions

• Each time the Operation Mode Selection Button is pressed, the Operation Mode is shifted inthe arrow direction.

Cooling Operation Auto Operation Soft Dry Operation

Open the door onthe remote control.

Each time the button is pressed, the operation mode is shifted in

the direction of the arrow.

C_m _ o _ FIL-'_F

•11111| _ ,u

Cooling Auto Soft Dry

• Each time the Fan speed Button is pressed, the Fan speed is shifted in the arrow direction.

Low High Super High

LI...I. ....] ...,,,,,,YJ.

Fan speed is on Low. Fanspeed is onHigh Fan speed is on Supel High

14 Floor Standing-Type Air Conditioner

OperatingInstructions

I Pressthe Start/Stop Button.

Pressthe Operation Mode Selection Button.

Pressthe Operation Mode Button on the remote controller.

Select Cooling Operation.

Set the temperature lower than the room temperature.

The temperature can be set within a range of 60°F-86°F by 1°F.

) -- TO raise the temperature r

J___ _ -- Zo lower the ternperature / ,-,-,oF

kJ _ _ / ,c

| nmIII .

Setthe Fan Speed.

I C_) & C_: _ Low High Super High

•,, , _ ......-,, .....;#,,,/-

[3 Each time the Fan Speed Button is pressed, Fan speedison Low. FanspeedisonHigh Fan speed ison SuperHigh

the Fan Speed mode is shifted in the arrow

direction.

Owner's Manual 15

OperatingInstructions

Pressthe Start/Stop Button.

Press the Operation Mode Selection Button.

Press the Operation Mode Button on the remote controller.

Select Soft Dry Operation.

1 Set the temperature lowerthan the room temperature.

The temperature can beset within a range of 60°F~86°F by I°F.

# _ -- To raise the temperature I "_ 6

17-1 °F

##1

16 Floor Standing-Type Air Conditioner

OperatingInstructions

Press the Operation Mode Selection Button.

Press the Operation Mode Button on the remote controller.

Select Auto Dry Operation.

Set the temperature upper or lower than the standard temperature.

The temperature can be set within a range of - 2'~2 by 1level.

...... I , '-,

0 __B

I ColdCool Proper

(This indication will be shifted to the initial Auto Mode Display state after 4 seconds.'

Warm Hot

raise the temperature. _ _ _

, To lower the temperature.

_.J/

During Auto Operation _

It is impossible to switch the indoor fan speed because of being already set to the best conditioner _

Owner's Manual 17

OperatingInstructions

I Pressthe Start/Stop Button.

Press the TURBO-Z button to operate the speed cooling mode and the unit will operate in

super high fan speed in cooling mode.

,_,HHIIIIII

No oo

sE_0 C_EL'c'_ i sE_¢) C_ELc_

Duringthe TURBO-Z function at any moment, the A!C starts to blow the cool air at extremely high

speed setting the room temp. automatically to 65°F. It is especially used to cool the room. in the

shortest time in a hotsummer.

In heat pump mode or neuro fuzzy mode however, the TURBO-Z function is not available.

18 Floor Standing-Type Air Conditioner

OperatingInstructions

I Pressthe Start/Stop Button.

Press the Operation Mode button and Lowtemperature setting buttons simultaneously for 3seconds.

The unit will respond with beep.

After 3 second,

it will shift

Press °C, _°F Switching Button.

#1111# xlllll

Owner's Manual 19

OperatingInstructions

Press Fan Operation Button. ']

I ressthe Start/Stop Button.

r 1

j,-,÷', ®_'_

(Operation will start when the button is pressed,

and stop when the button is pressed again.)

Press this button to make

the vertical louver auto

swing in right and left

directions.

Press this button to make

the horizontal louver auto

swing in up and down

directions.

20 Floor Standing-Type Air Conditioner

Page is loading ...

LG LF480CE Owner's manual

Brand: LG

Model: LF480CE

Category: Mobile air conditioners

Type: Owner's manual

This manual is also suitable for

Download PDF

report

LG LF480CE Owner's manual

This manual is also suitable for

LG LF480CE Owner's manual

Related papers

Other documents