Sony NW-MS77DR User manual

NW-MS70D/MS90D/MS77DR

Operating Instructions

3-248-529-15(1)

Portable Memory Stick Audio Player

Network Walkman

“WALKMAN” is a registered trademark of

Sony Corporation to represent Headphone

Stereo products.

is a trademark of Sony

Corporation.

2

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

Do not install the appliance in a confined

space, such as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the

apparatus with news papers, table cloths, curtains,

etc. And don’t place lighted candles on the

apparatus.

To prevent fire or shock hazard, do not place

objects filled with liquids, such as vases, on the

apparatus.

Note on installation

If you use the unit at a place subject to static or electrical

noise, the track’s transferring information may be

corrupted. This would prevent successful transferring

authorization on your computer.

For the customers in the

United States

Owner’s Record

The model number is located in the front and the serial

number is located inside the “Memory Stick” slot cover

of the player (see page 10). Record the serial number in

the space provided below.

Refer to them whenever you call your Sony dealer

regarding this product.

Model No.

Serial No.

INFORMATION:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference using one or more of the

following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

If you have any questions about this product:

Visit: www.sony.com/walkmansupport

Contact: Sony Customer Information Services Center at

(866)-456-7669

Write: Sony Customer Information Services Center

12451 Gateway Blvd..

Fort Myers, FL33913

3

For the customers in the

Netherlands

Voor de Klanten in Nederland

Gooi de batterij niet weg maar lever

deze in als klein chemisch

afval(KCA).

Declaration of Conformity

Trade Name: SONY

Model No.: NW-MS70D

NW-MS90D

NW-MS77DR

Responsible Party: Sony Electronics Inc.

Address: 16450 W. Bernardo Dr, San

Diego, CA 92127 USA

Telephone Number: 858-942-2230

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

4

This manual explains how to operate

Network Walkman. For details on how to use

the supplied software (SonicStage), refer to

the SonicStage Operating Instructions.

Notice for users

On the supplied software

• Copyright laws prohibit reproducing the software or the

manual accompanying it in whole or in part, or renting

the software without the permission of the copyright

holder.

• In no event will SONY be liable for any financial

damage, or loss of profits, including claims made by

third parties, arising out of the use of the software

supplied with this player.

• In the event a problem occurs with this software as a

result of defective manufacturing, SONY will replace

it.

However, SONY bears no other responsibility.

• The software provided with this player cannot be used

with equipment other than that which is so designated.

• Please note that, due to continued efforts to improve

quality, the software specifications may be changed

without notice.

• Operation of this player with software other than that

provided is not covered by the warranty.

OpenMG and its logo are trademarks of Sony

Corporation.

SonicStage and its logo are trademarks of Sony

Corporation.

“MagicGate Memory Stick” is trademark of Sony

Corporation.

“Memory Stick” and

are trademarks of Sony

Corporation.

“Memory Stick Duo” and

are trademarks

of Sony Corporation.

“MagicGate” and

are trademarks of Sony

Corporation.

ATRAC, ATRAC3, ATRAC3plus and their logos are

trademarks of Sony Corporation.

Microsoft, Windows and Windows Media are trademarks

or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

US and foreign patents licensed from Dolby Laboratories.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders.

In this manual,

TM

and ® marks are not specified.

5

Table of Contents

Overview ............................................ 6

What you can do with your Network

Walkman................................... 6

Other features ................................. 7

On “MagicGate Memory Stick” ..... 8

Using “Memory Stick” (not supplied)

on your Network Walkman...... 9

Step 1: Checking the package

contents ...................................... 10

Step 2: Charging the battery ............. 11

Locating controls .............................. 13

Network Walkman ........................ 13

Display.......................................... 14

Basic Operations

Transferring audio files from the

computer to your Network

Walkman .................................... 15

Note on playing songs with a

limited playing period (Timeout

contents) ................................. 18

Note on playing songs with a limited

playing count .......................... 18

Recording onto your

Network Walkman

— Only for NW-MS77DR ......... 19

Listening to music with your Network

Walkman .................................... 22

What is the Group function?......... 23

On other operations ...................... 24

Removing the headphones from your

Network Walkman .................. 25

Attaching the plug cover to the

supplied extension headphone

cord ......................................... 26

Advanced Operations

Playback mode ................................. 27

Changing the display mode .............. 28

Selecting the group

display mode .......................... 29

Displaying the remaining recordable

time

— Only for NW-MS77DR ......... 29

Adjusting treble and bass (Digital

sound preset) .............................. 30

Selecting the Sound quality .......... 30

Adjusting the sound quality .......... 31

Locking the controls (HOLD) .......... 32

Storing data other than audio files.... 32

Adjusting the settings of your

Network Walkman

Adjusting the time setting of your

Network Walkman to a

computer’s built-in clock............ 33

Adjusting the current time setting

(DATE-TIME)............................ 34

Limiting the volume (AVLS)............ 35

Setting the volume using the preset

volume function ......................... 35

Setting a volume level of the preset

mode ....................................... 35

Switching to the manual mode ..... 36

Turning off the beep sound

(BEEP) ....................................... 37

Changing the backlight setting ......... 37

Changing the setting of

synchro-recording

— Only for NW-MS77DR ......... 38

Selecting the bit rate

— Only for NW-MS77DR ......... 39

Editing the track name and group

name (EDIT NAME)

— Only for NW-MS77DR ......... 39

Other functions

Erasing audio file (ERASE) ............. 41

Regrouping songs (REGROUP) ....... 42

Charging the battery with a USB

connection (USB CHARGE) ..... 43

Formatting memory (FORMAT) ...... 44

Other Information

Precautions ....................................... 45

When disposing the Network

Walkman................................. 46

Troubleshooting................................ 48

To reset the player......................... 48

What happened? ........................... 48

Error messages.............................. 53

Specifications ................................... 56

Glossary............................................ 57

Menu list........................................... 59

Index ................................................. 60

6

Overview

What you can do with your Network Walkman

First, you need to install the SonicStage Software into your computer. You can easily transfer digital audio

files from your computer to the built-in flash memory or MagicGate-compatible “Memory Stick Duo” (not

supplied), and carry it anywhere to enjoy.

1 Store digital

audio files on

your computer.

2 Transfer files to

your Network

Walkman.

3 Enjoy music with

your Network

Walkman.

USB connection

MP3, WAV and

Windows

®

Media

Format Audio Files

Audio CDs

EMD (Electric Music

Distribution) Services

Download the

latest audio

files!

Store favorite

songs!

7

continued

NOTES:

• The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the

copyright holders.

• Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the Network

Walkman or computer.

Other features

• Compact size, light weight, skip-proof operation, scratch resistant, high portability.

• Approximately 44 hours*

1

of continuous playback with a rechargeable nickel hydride battery.

• Hybrid drive: you can store digital audio files in the built-in flash memory or MagicGate-compatible

“Memory Stick Duo” (not supplied).

• NW-MS70D/MS77DR: The 256MB built-in flash memory enables more than 11 hours*

2

of recording

time.

• NW-MS90D: The 512MB built-in flash memory enables more than 23 hours*

2

of recording time.

• The supplied SonicStage software enables you to transfer songs recorded using the recording cradle to

your computer (NW-MS77DR), and to record songs from audio CDs to the hard disc of your computer,

using the ATRAC3plus format (high sound quality, high compression).

• High-speed data transfer using the dedicated USB cable and USB cradle.

• Backlight LCD screen: song titles and artist names can be displayed.

• Group function: you can select songs to be played by album.

• Storage function: you can store a variety of data as well as audio files.

• NW-MS77DR: you can record songs*

3

from audio CD, etc., using the recording cradle without the need

to go through the computer.

*

1

Differs according to the data format. In this case, the figure for the battery duration is when continuously playing

ATRAC3 format audio files.

*

2

Differs according to the bit rate when recording. In this case, the figure for the recordable time is when recording at

48kbps ATRAC3plus format.

*

3

Recordable at 64/48kbps ATRAC3plus format.

8

On “MagicGate Memory Stick”

What is a “Memory Stick”?

“Memory Stick” is a compact, portable and versatile Integrated Circuit recording medium with a data

capacity that exceeds a floppy disk. “Memory Stick” is specially designed for exchanging and sharing

digital data among “Memory Stick” compatible products. Because it is removable, the “Memory Stick” can

also be used for external data storage.

Sizes of “Memory Stick”

There are two sizes of “Memory Stick”: regular size “Memory Stick” and compact size “Memory Stick

Duo”. With a duo adaptor, you can use “Memory Stick Duo” on a device supporting regular size “Memory

Stick”. For your Network Walkman, use a “Memory Stick Duo” (compact size “Memory Stick”).

Types of “Memory Stick”

There are five types of “Memory Stick”: MagicGate-compatible “Memory Stick Duo” is the only media

supported by your Network Walkman.*

1 “Memory Stick PRO”: “Memory Stick PRO” can be used on “Memory Stick PRO” compatible devices.

It has the “MagicGate” copyright protection technology.

2 “Memory Stick-R”: Data stored in “Memory Stick-R” cannot be overwritten. It can be used on

“Memory Stick-R” compatible devices. You cannot store data with “MagicGate” copyright protection

technology.

3 “Memory Stick”: You can store any data except for data requiring the “MagicGate” copyright protection

technology.

4 “MagicGate Memory Stick”: “MagicGate Memory Stick” is equipped with “MagicGate” copyright

protection technology.

5 “Memory Stick ROM”: “Memory Stick ROM” is a read-only “Memory Stick” in which data has been

prerecorded. Data stored in “Memory Stick ROM” cannot be overwritten or deleted.

* You can also use a “Memory Stick” for reading/writing data that is not protected by a copyright protection

technology.

What is “MagicGate”?

“MagicGate” is a copyright protection technology for “MagicGate Memory Stick” and compliant products,

such as Network Walkman. Authentication ensures that the protected content is transferred only between

compliant devices and “MagicGate Memory Stick”, and that protected content is recorded and transferred

in an encrypted format to prevent unauthorized copying or playback.

What you can do with your Network Walkman (continued)

9

Using “Memory Stick” (not supplied) on your

Network Walkman

Prepare MagicGate-compatible “Memory Stick Duo”.

“Memory Stick” is not supplied with your Network Walkman. Although there are several types of

“Memory Stick”, MagicGate-compatible “ Memory Stick Duo” is the only media that supports your

Network Walkman.

When you purchase “Memory Stick”, make sure that you select MagicGate-compatible “Memory Stick

Duo” with a logo and logo.

Note

The memory capacity of MagicGate-compatible “Memory Stick Duo” supported by your Network Walkman is up to

128MB.

Notes on using “Memory Stick Duo”

• Do not remove “Memory Stick Duo” during reading or writing data.

• Data may be damaged in the following cases.

– The Network Walkman is removed from the USB cradle or the dedicated USB cable is unplugged

while reading or writing data.

– The “Memory Stick” is used in a location subject to static electricity or electric noise.

• Creating backup copies of important data is recommended.

Notes on formatting (initializing)

“Memory Stick Duo” is shipped with a FAT format as the standard format.

To format “Memory Stick”, use devices conformable with the “Memory Stick”.

If “Memory Stick” is formatted using Windows Explorer, “FORMAT ERROR” (page 53) will be displayed

and audio files cannot be played on the Network Walkman. On Windows XP, you can format “Memory

Stick” properly. When you format “Memory Stick”, always perform either one of the following:

• Follow the instructions of “Formatting memory” on page 44.

• Format using the supplied SonicStage software.

For details on how to format using the SonicStage software, refer to “SonicStage Online Help.”

Displaying on Windows Explorer

When you connect Network Walkman to your computer with the supplied USB cable, you can display the

data stored on “Memory Stick” or built-in flash memory as an external drive (for example, as the D drive)

using Windows Explorer.

• Data transferred with the SonicStage software, and audio data recorded directly from the digital/analog

audio device (only for NW-MS77DR) will be stored in a “HIFI” folder. Do not edit data stored in the

“HIFI” folder using Windows Explorer. Data copied or edited using Windows Explorer cannot be played

on your Network Walkman.

• You can display data that has been stored on other “Memory Stick” compatible devices (JPEG, MPEG

format, etc.,).

For information on how to handle data except in the “HIFI” folder, refer to the instruction manual that

comes with the equipment with which the recording has been done.

10

Earbuds(Size S)

Earbuds(Size L)

Serial Number

“Memory Stick” Eject

button

“Memory Stick”

slot

Please check the accessories in the package.

NW-MS70D/MS77DR

NW-MS90D (US model)

• Network Walkman (1)

• Headphones (1)

NW-MS90D (Non-US model)

• Network Walkman (1)

• Headphones (1)

• Earbuds (Size S, L) (1)

NW-MS70D/MS90D

• USB cradle (1)

NW-MS77DR

• Recording USB cradle (1)

• Dedicated USB cable (1)

Step 1: Checking the package contents

• AC power adaptor (for the supplied USB

cradle) (1)

• Carrying pouch (1)

• Neck strap (1)

• Extension headphone cord (1)

• Optical digital cable (1)

(Only for NW-MS77DR)

• CD-ROM (1)

• Operating instructions (1)

• SonicStage Operating Instructions (1)

About the Serial Number

The serial number provided for your device is

required for the customer registration. The number

is on a label on the inside of the “Memory Stick”

slot cover.

Press the “Memory Stick” Eject button to open the

cover and check the serial number.

For the customer of NW-MS90D

(Non-US model)

WARNING

The supplied headphones are a close-up design to

create Powerful Bass Sound. Do not use

headphones while driving.

• Do not use headphones while driving, cycling, or

operating any motorized vehicle.

• It can also be potentially dangerous to play your

headphones at high volume while walking,

especially at pedestrian crossings. You should

exercise extreme caution or discontinue use in

potentially hazardous situations.

When you wear the headphone, you may hear noise,

such as the cord rubbing against your clothes.

This is not malfunction.

11

Step 2: Charging the battery

Charge the built-in battery before using your Network Walkman.

Connect the AC power adaptor as illustrated below. The control buttons on your Network Walkman are all

disabled while it is attached to the USB cradle or the recording USB cradle.

1 Connect the AC power adaptor.

Connect the DC plug of the AC power adaptor to the DC IN jack of the USB cradle or the recording

USB cradle. Connect the AC plug to a wall outlet.

NW-MS70D/MS90D

NW-MS77DR

to DC IN

to wall outlet

AC power adaptor

to wall outlet

AC power adaptor

to DC IN

continued

12

Battery duration (for continuous use)

ATRAC3 format: Approximately 44 hours

ATRAC3plus format: Approximately 36 hours

On the remaining battery indication

The battery icon in the display (page 14) changes as

shown below.

charge

the battery

low battery

The CHARGE lamp on the USB cradle or

the recording USB cradle lights up and

charging starts. It takes approximately 90

minutes*. When charging is complete, the

CHARGE lamp goes out.

We recommend you to charge the battery for

30 minutes or more continuously. Your

Network Walkman requires 15 minutes to

check the battery condition to protect it

before a quick recharge starts.

* The figure represents the charging time for an

empty battery charged in an ambient temperature

of between 5˚C to 35˚C (67˚F to 95˚F). The

charging time will be shortened depending on the

battery power remaining. If the battery is charged

in a low-temperature environment, the charging

time will be longer.

Notes

•

Charge the battery in an ambient temperature of

between 5˚C to 35˚C (67˚F to 95˚F).

• It cannot playback during charge.

battery

power is not

enough to

play music

USB Cradle

USB cradle

connector

Access lamp

CHARGE lamp

2 Attach your Network Walkman to the supplied USB cradle or the recording USB cradle.

USB cradle

connector

Access lamp

CHARGE lamp

Recording

USB cradle

Step 2: Charging the battery (continued)

Note

Be sure to attach your Network Walkman in the direction of the arrow as illustrated below.

NW-MS70D/MS90D

NW-MS77DR

13

Locating controls

For details about each part, refer to the pages in parentheses.

Network Walkman

Rear sideFront side

1 VOL (+/–) control (Page 23, 35)

2 Headphone plug (Page 25)

3 Plug cover (Page 25 to 26)

4 SOUND/AVLS button

(Page 30, 35)

5 “Memory Stick” Eject button

(Page 15, 19, 24)

6 Display (Page 14, 27, 53 to 55)

For details on the display and icons, refer to

page 14.

7 Shuttle switch

(Page 24, 27 to 44)

8 Play/Stop button

(Page 23 to 24, 27 to 44)

9 RESET button (Page 48)

0 USB cradle connector (Page 12, 17, 21)

qa HOLD (Locking controls) switch

(Page 32)

qs MENU button (Page 27 to 44, 59)

You can switch to the Time display by

pressing the MENU button for a while.

qd Access lamp (Page 17)

qf “Memory Stick” slot (Page 15, 19, 24)

continued

14

Display

1 Text/graphic information display (page 27)

Displays track number, track name, current

date and time (page 28 to 34), ERROR

MESSAGE (page 18, 53 to 55) and menu.

Press the MENU button to switch the display

mode. For details, refer to “Changing the

display mode” on page 28.

And for details on the display mode during

recording, refer to “Recording onto your

Network Walkman” on page 19 to 21.

2 Playback mode indication (page 27)

The current playback mode is displayed.

3 AVLS indication (page 35)

The indication appears while the AVLS

function is activated.

4 Digital sound preset indication

(page 30 to 31)

The current sound setting is displayed.

5 “Memory Stick” indication (page 15, 19)

The icon is displayed when “Memory Stick”

(not supplied) is inserted into the slot.

6 Remaining battery indication (page 12)

The remaining battery power is displayed.

Locating controls (continued)

15

Basic Operations

Transferring audio files from the computer

to your Network Walkman

Note

Before connecting your Network Walkman to the computer for the first time, be sure to install the

SonicStage software from the supplied CD-ROM in your computer. Even if the SonicStage software is

already installed, you need to install SonicStage software with this package before connecting your

Network Walkman to the computer (update programs may be available.)

1 Install the SonicStage software in your computer using the supplied CD-ROM.

Follow step 1 only for the first time when you connect your Network Walkman to the computer.

For details, refer to the manual “SonicStage Operating Instructions.”

2 Import audio files into the SonicStage software.

For details, refer to the manual “SonicStage Operating Instructions.”

3 Prepare the device to which you transfer data.

Insert MagicGate-compatible “Memory Stick Duo” (not supplied) into the slot of your Network Walkman.*

While a “Memory Stick” is inserted,

is indicated in the display of your Network Walkman.

* Your Network Walkman comes equipped with 256MB (NW-MS70D/MS77DR)/512MB (NW-MS90D) built-in

flash memory. You can use your Network Walkman without external memory. When you do not use “Memory

Stick”, skip step 3 and follow step 4

.

MagicGate-

compatible

“Memory

Stick Duo”

“Memory Stick”

slot

Notes

• When connecting your Network Walkman to

the computer, make sure that the erasure

prevention switch (page 46) of “Memory Stick

Duo” is not set to “LOCK.”

• Insert “Memory Stick Duo” into the slot until it

clicks into the place.

• To remove “Memory Stick Duo”, refer to page

24.

• Do not label “Memory Stick Duo” to prevent

sticking it in the slot.

“Memory Stick”

Eject button

continued

16

4 Connect your Network Walkman to the computer.

1 Connect the AC power adaptor*.

Connect the supplied AC power adaptor to the DC IN jack on the USB cradle or the recording USB cradle, and

then to a wall outlet.

2 Connect the USB cradle or the recording USB cradle to the computer.

Connect the small connector of the dedicated USB cable into the USB jack on the USB cradle or the recording

USB cradle, and the large connector to a USB port on your computer.

NW-MS70D/MS90D

NW-MS77DR

* You can charge the battery without connecting the AC power

adaptor. Connect your Network Walkman and the computer (2).

From the menu, select “USB CHG: ON” (page 43) to enable

charging the battery with a computer. However, frequent use of

USB charge may increase the consumption of the computer’s

built-in battery.

2

1

Dedicated USB

cable (supplied)

to the USB jack

to the USB port

USB cradle

AC power adaptor*

to

wall outlet

to DC IN

Dedicated USB

cable (supplied)

to the USB jack

to the USB port

AC power adaptor*

to

wall outlet

to DC IN

Recording

USB cradle

Transferring audio files from the computer to your Network Walkman (continued)

2

1

3 Set the record select switch. (Only for NW-MS77DR)

Set the record select switch to “USB/KEY PROTECT.”

Record select switch

17

Basic Operations

4 Attach your Network Walkman to the USB cradle or the recording USB cradle.

“CONNECT” is indicated in the Network Walkman display, and the access lamp blinks while accessing the

computer.

Note

Be sure to attach your Network Walkman in the arrow direction as illustrated.

NW-MS70D/MS90D

NW-MS77DR

Notes

• The access lamp blinks while your Network Walkman accesses the computer.

• Do not disconnect the USB cable or remove your Network Walkman from the USB cradle or the recording USB

cradle when the access lamp is blinking. The data being transferred may be destroyed.

• Use of your Network Walkman with a USB hub or a USB extension cable is not guaranteed. Always connect your

Network Walkman to the computer directly using the dedicated USB cable.

• Some USB devices connected to the computer may interfere with the proper operation of your Network Walkman.

• The control buttons on your Network Walkman are all disabled while it is connected to a computer. If you attach

your Network Walkman to the USB cradle or the recording USB cradle connected to the computer during

playback, playback stops and “CONNECT” appears in the Network Walkman display.

• You can display the data stored in the built-in flash memory using Windows Explorer when your Network

Walkman is connected to the computer. However, in case “Memory Stick” is inserted into the slot, the data stored

in “Memory Stick” will be displayed.

USB cradle connector

Access lamp

USB cradle

connector

Access lamp

Recording

USB cradle

continued

18

5 Transfer audio files to your Network Walkman.

For information on transferring audio files to the built-in flash memory or MagicGate-compatible “Memory Stick

Duo” (not supplied), refer to the separate manual “SonicStage Operating Instructions.”

z Tip

For information on transferring audio files back to the computer, refer to the manual “SonicStage Operating Instructions”

or online Help for the SonicStage software.

Note on playing songs with a limited playing period

(Timeout contents)

Some songs distributed via the Internet (EMD service) have a limited playing period.

If you try to play an expired song, “EXPIRED” blinks and the next song will be played after a moment.

In addition, an expired song cannot be played using the SonicStage software or transferred to your Network

Walkman. Delete any songs as needed.

Note on playing songs with a limited playing count

Your Network Walkman does not support contents with a limited playing count.

When you try to play a song with a limited playing count, “EXPIRED” will be displayed and the song will

not be played.

Transferring audio files from the computer to your Network Walkman (continued)

19

Basic Operations

Recording onto your Network Walkman

— Only for NW-MS77DR

You can record songs onto your Network Walkman from a digital audio device (e.g. CD player) using an

optical digital cable (supplied), or an analog audio device (e.g. cassette tape player) using a connecting cord

(not supplied), not via computer.

Note

Recording from a digital audio device using an optical digital cable is possible only with a sound source (CD, MD, etc.) of

44.1 kHz sampling frequency. When recording a sound source of another sampling frequency, use analog recording,

connecting the recording cable to the LINE OUT jack, etc.

1 Prepare the device to which you record songs.

When recording to the built-in flash memory

Remove MagicGate-compatible “Memory Stick Duo” (not supplied) from the Network Walkman. (If inserted, songs

will be recorded to the “Memory Stick Duo”.) For removing the “Memory Stick Duo”, refer to page 24.

When recording to a “Memory Stick”

Insert MagicGate-compatible “Memory Stick Duo” (not supplied) into the Network Walkman.

is indicated in the display when a “Memory Stick” is inserted.

MagicGate-

compatible

“Memory

Stick Duo”

“Memory Stick”

slot

“Memory Stick”

Eject button

Notes

• When using a “Memory Stick”, release the

erasure prevention switch (page 46) on the

“Memory Stick” if it set to “LOCK.”

• Be sure to insert the “Memory Stick” fully until

it clicks.

• Do not label “Memory Stick Duo” to prevent

sticking it in the slot.

continued

20

2 Connect the Network Walkman to a digital/analog audio device.

1 Connect the AC power adaptor.

Connect the supplied AC power adaptor to the DC IN jack on the recording USB cradle, and then to a wall outlet.

2 Connect the recording USB cradle and the digital/analog audio device.

Connect the recording cable to the LINE IN (OPTICAL) jack on the recording USB cradle, and then to the digital

out (optical) jack* on the digital audio device.

* When connecting to an analog audio device, connect to the LINE OUT jack, etc.

Note

You cannot charge the battery while recording. Be sure to charge before recording.

3 Set the record select switch.

Set the record select switch to “LINE IN.”

Recording cable (optical digital

cable, connecting cord, etc.)

to LINE IN

(OPTICAL)

CD player, cassette

tape player, etc.

AC power adaptor

to

wall outlet

to DC IN

to the digital out (optical)

jack/LINE OUT jack

Record select switch

Recording onto your Network Walkman (continued)

Page is loading ...

Sony NW-MS77DR User manual

Sony NW-MS77DR User manual

Related papers

Other documents