Ohlins FGHO1084 Mounting Instruction

Öhlins Front Fork Kit for Honda CRF 450 X

FGHO 1084

Application Speciﬁc Mounting Instructions

Issued 2009-11-13

Kit Contents (application speciﬁc)

Recommended Tools (application speciﬁc)

Hydraulic Stop Cup

Set-Up Data

Spring Recommendation

Part No. Pcs.

Front Fork kit FGHO 1084 1

Base plug (with o-rings) 15430-02 2

Spacer 2 mm 15443-02 14

Hydraulic Stop Cup N/A N/A

Spring Support washer N/A N/A

OEM Fork Cap Tool 50 mm Octagon

Socket for OEM Base Plug 21 mm

Socket for Öhlins Base Plug 22 mm

FGHO 1084 Cartridge kit uses the STD OEM hydraulic stop cup.

Rebound Damping 10 clicks

Compression Damping 15 clicks

Spring Preload 0 mm

Fluid Volume (each leg) 0,340 litre

Cartridge Kit FGHO 1084 shall be used together with

Öhlins Front Fork Springs part no. 08762-xx. For rate

recommendations, see Owner’s Manual/ General Mounting

Instructions.

Note!

The fork springs need to be ordered separately depending on the

rider’s choice of spring rate.

Part No. Pcs.

Circlip 15440-01 2

Öhlins Sticker 00197-01 2

TTX Cartridge Sticker 00191-29 2

Spring preload range -2 to 8 mm

(can be adjusted by adding/removing washers 15443-02)

Fluid volume range (each leg) 0,300 - 0,380 litre

Öhlins Front Fork uid 01312-01