Crystorama 5024-AW-RO-MWP User manual

Type
User manual

Crystorama 5024-AW-RO-MWP is a chandelier-style lighting fixture suitable for damp locations. It requires four candelabra-base bulbs (40W recommended, 60W max), preferably LED for extended use. The fixture's height is adjustable via the included chain. Installation involves attaching the center column and mounting plate, adjusting the chain length, connecting the wires, and securing the canopy. It comes with 24 crystal sets for decoration and metal or white PVC candle sleeves for each socket.

Crystorama 5024-AW-RO-MWP is a chandelier-style lighting fixture suitable for damp locations. It requires four candelabra-base bulbs (40W recommended, 60W max), preferably LED for extended use. The fixture's height is adjustable via the included chain. Installation involves attaching the center column and mounting plate, adjusting the chain length, connecting the wires, and securing the canopy. It comes with 24 crystal sets for decoration and metal or white PVC candle sleeves for each socket.

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #5024-AW-RO-MWP
WARNING:
Electrical Danger
Turn Power Off
You will need 4- Candelabra Base Bulb
40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes
The fixture is Damp rated
WARNING:This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm.For more
information go to www.p65warnings.ca.gov
HOW TO INSTALL:
Place the fixture parts on a soft
cloth-covered platform before
installation of fixture.
Crystorama.com
Crystal Sets
A. 24Sets. (1)14mm+(1)AS9-1.5"
A
13.5"
15"
89"
A
1. Attach the Center column kit to the
fixture body kit using the coupling
and finial.
2. Attach the mounting plate onto the
outlet box.
4. Raise the fixture up and do the wire
connection.
Attach the canopy over the mounting plate
and secure with loop.
6. Dress the crystals as illustrated.
3. Decide the desired hanging height and
adjust the chain to the correct length.
5. Put the metal candle sleeve onto
the socket.
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #5024-AW-RO-MWP
Part Number
Part Numbers
A. (1)-Mounting hardware
Wire connector x2.
Mounting plate x1.
Lock washer x1.
Hex nut x3.
Threaded nipple x1.
Screw x4.
Threaded nipple ; H8 1/4"
Top bobeche ; Ø3 1/8" ; 4pin ; 10.3mm center hole
XSN5021AWBOB3.375IN
Metal part ; H1.5"
Column vase ; H5 7/8"
I. (4)-Metal candle sleeve ; H3 1/4"
XSN5021AWCDL3.25IN
J.(4)-White PVC candle sleeve
XSN5021WHCDL3.25IN
Crystorama.com
B
E
C
A
Outlet Box
F
G
D
H
I / J
B. (1)-Canopy ; Ø5" ; 10.3mm center hole.
XSN5024AWCAN5IN
C. (1)-Loop; XSN5024AWTOLOOP
D. (2)-Ball nut
E. (1)-Chain(3mmx72"); XSN5024AWCHA3MM
F. (1)-Fixture loop; XSN5024AWBOLOOP
G. (1)-Center column kit; XSN5021AWBOB3.375IN
H. (1)-Fixture body kit
Coupling.
Distributor box cover x2 ; Ø3"
Distributor box ; Ø3" ; 10.3mm center hole.
3.5"Arm x4.
Bobeche x4 ; Ø3 1/8" ; 4pin, 10.3mm center hole.
K
(Bulb not included)
XSN5021AWBOB3.375IN
K.(1)-Finial; XSN5024AWFIN
  • Page 1 1
  • Page 2 2

Crystorama 5024-AW-RO-MWP User manual

Type
User manual

Crystorama 5024-AW-RO-MWP is a chandelier-style lighting fixture suitable for damp locations. It requires four candelabra-base bulbs (40W recommended, 60W max), preferably LED for extended use. The fixture's height is adjustable via the included chain. Installation involves attaching the center column and mounting plate, adjusting the chain length, connecting the wires, and securing the canopy. It comes with 24 crystal sets for decoration and metal or white PVC candle sleeves for each socket.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI