phrozen LUNA Cure User guide

Brand
phrozen
Model
LUNA Cure
Type
User guide

phrozen LUNA Cure

Below you will find brief product information to help you get started with your new device and learn about its features and possible use cases.

The phrozen LUNA Cure is a UV Curing Lamp designed for use with 3D printed models. The lamp emits ultraviolet light that helps to cure and harden the resin used in 3D printing, making the models stronger and more durable. The LUNA Cure has several features that make it easy and convenient to use.

  • Preset curing time: The LUNA Cure comes with three preset curing times: 5 minutes, 10 minutes, and 20 minutes. These presets make it easy to cure models of different sizes and thicknesses.

phrozen LUNA Cure

Below you will find brief product information to help you get started with your new device and learn about its features and possible use cases.

The phrozen LUNA Cure is a UV Curing Lamp designed for use with 3D printed models. The lamp emits ultraviolet light that helps to cure and harden the resin used in 3D printing, making the models stronger and more durable. The LUNA Cure has several features that make it easy and convenient to use.

  • Preset curing time: The LUNA Cure comes with three preset curing times: 5 minutes, 10 minutes, and 20 minutes. These presets make it easy to cure models of different sizes and thicknesses.
LUNA CURE
Power
Pause
S
M
歡迎關注Phrozen社群獲取最新消息，並訂閱Phrozen YouTube頻道，觀看更多3D列印機教學。
如有任何疑問，請隨時與我們聯繫。
LUNA CURE
Power
Pause
S
M
LUNA CURE
Power
Pause
S
M
LUNA CURE
Power
Pause
S
M
▎按鍵 S 為預設模式 ▎按鍵 M 為手動模式
此模式可快速選擇三種預設固化時間，分
別為5分鐘、10分鐘及20分鐘。
按下按鍵M後，點擊上下鍵每次可增減1分
鐘。長按上下鍵，則可快速增減分鐘數。
設定固化時間
02
▎開啟機台電源 ▎關閉機台電源
接上電源線，按下 Power 按鈕。 長按 Power 按鈕，聽到嗶聲後，固化燈
電源即關閉。
啟動電源及開關
LUNA CURE
Power
Pause
S
M
01
蓋上遮光罩，按下 Power 按鈕，固化燈
即開始運轉。
固化燈運轉
03
固化燈使用說明
▎8歲以上兒童、肢體及行為障礙者需在法定監護人的指導下使用本
產品，以確保使用者知悉所涉及的風險。禁止兒童在沒有監護人的
陪同下使用本產品。
▎未經法定監護人陪同，禁止兒童清潔或維護本產品。
如需外觀清潔請用酒精擦拭，請勿用油性或腐蝕性的液
體擦拭。
保養方式
▎固化燈蓋上後需確實與底座的
　四個邊吻合，才能啟動固化燈
　運轉。
▎請勿在未蓋上遮光罩的情況下
　直視固化燈光源，此動作可能
　造成眼部損傷。
注 意 事 項
LUNA CURE
Power
Pause
S
M
LUNA CURE
Power
Pause
S
M
▎Click the button S
for preset modes
▎Click the button M
for custom mode
This comes with three curing time settings:
5 min, 10 min, 20 min.
Click on the up and down keys to increase
or decrease 1 minute each time. Long
press the keys to quickly increase or
decrease the minutes.
To Set Curing Time
02
▎Turn on the device ▎Turn off the device
Connect the power cable. Press the
Power button to turn on the device.
Long press the Power button. The curing
lamp will turn off after a beep sound.
Power Supply & Light Switch
LUNA CURE
Power
Pause
S
M
01
LUNA CURE
Power
Pause
S
M
Please follow Phrozen’s social media accounts and subscribe to our YouTube channel to learn more about printing tips and share ideas with one another.
Feel free to contact us if you have any questions.
LUNA CURE
Power
Pause
S
M
Close the UV lamp cover. Click on the
Power button. The curing lamp will begin
operation.
How to Operate
the UV Curing Lamp
03
The UV lamp cover needs to fit all four
sides of the base perfectly for the device
to begin operating.
Do not stare at the UV curing lights
without closing the UV lamp cover, this
may cause damage to your eyes.
Warning
UV Curing Lamp User Guide
This appliance can be used by children aged 8 and above as well as by persons
with reduced physical, sensory, or mental capabilities, if supervised or given
instruction regarding the use of the appliance in a safe way, to ensure that the
hazards involved are understood. Children are NOT allowed to play with the
appliance.
Children are NOT allowed to clean or provide maintenance without adult
supervision.
Standard Maintenance Procedure
Please use sanitizing alcohol to clean the outside of your device.Do not use any
oily or corrosive liquids or to clean the device.
  • Page 1 1
  • Page 2 2

phrozen LUNA Cure User guide

Brand
phrozen
Model
LUNA Cure
Type
User guide

phrozen LUNA Cure

Below you will find brief product information to help you get started with your new device and learn about its features and possible use cases.

The phrozen LUNA Cure is a UV Curing Lamp designed for use with 3D printed models. The lamp emits ultraviolet light that helps to cure and harden the resin used in 3D printing, making the models stronger and more durable. The LUNA Cure has several features that make it easy and convenient to use.

  • Preset curing time: The LUNA Cure comes with three preset curing times: 5 minutes, 10 minutes, and 20 minutes. These presets make it easy to cure models of different sizes and thicknesses.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents