2. MXN
  3. IUF
IUF

MXN IUF Operating instructions

  • Hello! I have reviewed the user manual for the SEM-C(H) camera interface, designed for Volvo FH/FM/FMX trucks with a SEM2 module. This plug and play interface enables the connection of one analog camera with a motorized shutter using the XC164 connector. I am ready to answer any questions you may have about its installation and usage.
  • What is the IF SEM-C(H) interface designed for?
    Where is the 5-pin green connector located?
    Does the interface work with any Volvo truck?
IF SEM-C(H)
for Volvo FH/FM/FMX trucks with SEM2 Module
202106 V1.00
Location of the 5-pin green connector
is under the fuse box
in the center of the dashboard
This plug and play IF SEM-C(H) interface
for one analog camera (with motorized
shutter), only works if the Volvo truck is
equipped with a SEM2 module.
XC164 5-pin green connector
to XC164 connector
to shutter camera
/