2. Rukket
  3. Tent100
Tent100

Rukket Tent100 Operating instructions

  • Hello! I've reviewed the Set Up Instructions for the Rukket Light Up Bungalow. This document describes how to set up the tent, including extending poles, securing the lights. It also provides guidance on how to take down the tent and fold it for storage. I'm here to answer any questions you may have about the instructions or the product's features.
  • Where can I find the video instructions?
    What is included in the package?
    How to take down the tent?
LIGHT UP BUNGALOW
Set UP INSTRUCTIONS
Our video instructions provide the best guidance for setting up your light up bungalow.
They can be viewed online at
RukketSports
V1
Tent
Reversible Pillow Carry Bag
Stakes
Battery Box(Attached to Tent)
Lights (Attached to Tent)
LIGHT UP BUNGALOW
Set UP INSTRUCTIONS
V1
1. Take out the beach tent from the
carrying bag.
2. Lay the beach tent flat and with
hub upright.
3. Stretch out the second
node of pole to make sure
the poles are fully extend-
ed and spread out.
4. Standing behind the
tent, use one hand to hold
the central hub. Using your
other hand, pull the rope
up to its fully extended
position.
5. Your tent should be in
the upright postion know.
Tie the string together to
close the hole where the
light was inserted so it
doesn't slide out.
LIGHT UP BUNGALOW
Take down INSTRUCTIONS
V1
1 & 2. With both hands holding the pole, use your thumb to
press down the bottom layer of the central hub until the entire
structure completely falling down.
3. Lay the beach tent flat
and with hub upright. (When
taking down please make
sure the air in the tent is
completely released out)
4. With both hands holding
the pole part near the
connection point, pull in
opposite directions to
make separation in the
middle of the lock.
5. Fold the second node of
pole, and fold the fabric
and pole inward toward to
the central hub.
6. Use provided strap to tie
the rolled tent.
/