Page is loading ...
CARE & MAINTENANCE
1. Avoid hitting
Metal furniture should be placed in places where hard objects are not often encountered;
The ground where the metal furniture is placed should also be kept flat, so that the furniture
is stable and flat on the ground.
2. Clean dust
It is best to use a cotton cloth to wipe the surface of metal furniture. It is best to use a soft
wool brush to remove dust from the recesses and reliefs of the furniture.
3. Keep away from acids and alkalis
Acid and alkali, which are corrosive to iron. If metal furniture is accidentally stained with acid
(such as sulphuric acid, vinegar), alkali (such as methyl soda, soapy water, soda), you should
immediately rinse the them with water and dry it with a dry cotton cloth.
4. Keep away from sun and rain for a long time
It is best to place furniture in a position that avoids prolonged direct sunlight and rain. It can
cause discolouration of the lacque and the coloured lacquer layer dries out and flakes off,
and the metal becomes oxidised and degraded under sun for a long time; . Humidity can
cause rusting of the metal and de-filming of the chrome plating. Where possible, place under
covers or patio, awnings.
5. Eliminate rust
If the furniture is rusty, do not polish it with sandpaper. If the rust is small and shallow, use
cotton yarn dipped in machine oil to apply to the rust, wait a few moments and wipe with a
cloth to eliminate the rust.
/
