2. Crystorama
  3. 5260-EB-CL-MWP
5260-EB-CL-MWP

Crystorama 5260-EB-CL-MWP User manual

  • Hello! I've reviewed the assembly instructions for the Crystorama 5260-EB-CL-MWP light fixture. This document outlines the installation process, details about the required candelabra base bulbs, and mentions that it is damp-rated. I'm here to assist with any questions you have about the instructions or the device itself.
  • What type of bulbs does the fixture use?
    What is the recommended wattage for the bulbs?
    Is this fixture suitable for damp locations?
ASSEMBLY INSTRUCTION MODEL # 5260-EB-CL-MWP
LIGHTING THE WAY FOR SIXTY YEARS
WARNING:
Electrical Danger
Turn Power Off
You will need 3- Candelabra Base Bulb
40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes
The fixture is Damp rated
WARNING:This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm.For more
information go to www.p65warnings.ca.gov
HOW TO INSTALL:
Place the fixture parts on a soft
cloth-covered platform before
installation of fixture.
1. Install the mounting bar onto the
outlet box.
3. Dress the crystals as illustrated.
A. 96 Sets. (1)14mm + (1)60mm plug
Crystal Sets
Crystorama.com
12"
9 1/4"
A(20sets)
A(32sets)
A(44sets)
2. Raise the fixture up over the threaded
nipple on the mounting bar.
After the wire connection is completed,
Secure with the finial.
ASSEMBLY INSTRUCTION MODEL # 5260-EB-CL-MWP
LIGHTING THE WAY FOR SIXTY YEARS
Part Number
Part Numbers-For Hanging
B. (1)-Fixture body
Banding; Ø11".
Socket x3.
44 round crystal pins.
Crystorama.com
Outlet Box
A
C
B
A.(1)-Mounting hardware
Wire connector ×2.
Mounting bar x1.
Hex nut ×1.
Thread Nipple ×1.
Screw ×2.
C. (1)-Basket Ring ; Ø7"
First layer of ring ; 32pin holes.
Second layer of ring ; 20pin holes.
D. (1)-Ball Nut-XSN5260EBBANUT
D
/