2. POWER SOCCER SHOP
  3. PN 1525

POWER SOCCER SHOP PN 1525 User manual

  • Hello! I've reviewed the assembly instructions for the PS FORCE 1525 Soccer Guard from Power Soccer. This document details how to attach side panels, adjust height and width, and secure the guard to a wheelchair. I'm ready to assist you with assembly or any other questions you may have about the Soccer Guard.
  • How do I attach the side panels to the wheelchair leg rest?
    How can I adjust the guard angle?
    How do I attach the front panels?
    How do I secure the front panels together?
    How do I adjust the height of the guard?
Assembly Instructions
PN 1525
2. Use clamps and two 2” bolts to attach each side
panel to the wheelchair’s leg rest. The single
hole and line of 4 holes are for the clamps to set
the guard angle.
3. Attach 1 side panel to Right Front Panel.
Insert four 1½” bolts in the row of holes in
the side panel to attach the guard at the
correct height (2 -5 inches from the
ground).
4. Attach second side panel to Left Front
Panel.
5. Select width of guard. Insert four 1½” bolts to attach Left Front Panel to
Right Front Panel. Secure with one washer and hex nut for each bolt.
/