2. D-Link
  3. D-Link Eagle Pro AI App
D-Link Eagle Pro AI App

D-Link D-Link Eagle Pro AI App, Eagle Pro AI App User guide

  • Hello! I've reviewed the user manual for the D-Link E15 range extender. This document outlines the setup procedure using the Eagle AI Pro app, including connecting it to your network and setting up the extender in either Wireless Extender or Access Point mode. I'm ready to assist with your questions about your E15 range extender.
  • What app do I need to set up the range extender?
    What are the two modes this unit supports?
    How do I complete the setup?
    What do the LEDs signify?
Technical Support Setup Procedure
How do I set up and install my E15 range extender via Eagle
AI Pro App
Set up using Android OS / iPhone iOS
1 Search and install the free EAGLE PRO AI available on the App Store or on Google
Play.
2 Launch the EAGLE PRO AI from the home screen of your device. Create an account, then
tap Sign Up with Email.
Technical Support Setup Procedure
3 Tap Install New Device. Scan the Setup code on the bottom of the extender. Follow the
on-screen instructions to complete the setup.
4 Make sure you are connected to your home network, which you would like to extend,
tap Next
(Note: This unit supports two different modes, Wireless Extender and Access Point.
Select Wireless, then tap Select)
Technical Support Setup Procedure
5 Place your Extender between your router and where you want to extend the signal too,
then tap Next
6 When the status LED turns blinking orange, tap Next
7 Select the Wi-Fi network you are trying to Extend (Ex. Home Network), then tap Next
Technical Support Setup Procedure
8 Enter in the Wi-Fi password of the network you are
extending (Ex. Home Network), then tap Next
9 Enter a name (SSID) and password for identifying and encrypting your extended
network.
10 Create an admin/device password, then tap NEXT.
Note: It is strongly recommended that you change the default device password for
accessing the extender’s configuration page.
Technical Support Setup Procedure
11 Give the device a name, for voice commands with Alexa or Google Assistant, then
tap Next
12 The app will add your device to your D-Link Account, and restart. Tap Finish
Set up is complete. You can click on Device to manage your settings!
Technical Support Setup Procedure
---END---
/