SURVIVOR FILTER L800 User guide

Brand: SURVIVOR FILTER

Model: L800

Type: User guide

SURVIVOR FILTER L800: Your personal water filtration system for outdoor adventures. Transform any freshwater source into clean, safe drinking water with ease. Ideal for camping, hiking, backpacking, and emergency preparedness. Removes 99.999% of bacteria, parasites, and viruses with its triple-stage filtration system. Enjoy peace of mind knowing you have access to pure water wherever your journey takes you.

Survivor Filter®

PORTABLE WATER FILTER

Product Guide

Survivor Filter PRO X

Electric Water Filter

SURVIVORFILTER.COM

MODEL SKU#: L800

SURViVOR FiLTER

Survivor Filter®

PORTABLE WATER FILTER

Specs &

Components

©SURVIVOR FILTER | 1.888.602.6367 | SURVIVORFILTER.COM/CONTACT

MODEL SKU#: L800

REPLACEMENT FILTER SKU#:

Pre-Filter: L610-PF

Carbon Filter: L610-CF

Ultra Filter: L610-UF

CAPACITY:

Pre-Filter: 100,000 Liters (26,417 gal)

Carbon Filter: 2,000 Liters (528 gal)

Ultra Filter: 100,000 Liters (26,417 gal)

FLOW RATE: 500 mL/min (17 oz/min)

SIZE: 6.2 x 2.1 x 4.9”

WEIGHT: net: 14.10oz, gross: 21.16 oz

MICRON RATING:

Pre-Filter: 0.1 micron

Ultra Filter: 0.01 micron

SPECIFICATIONS

COMPONENTS

Electric Survivor Filter PRO X

2x AA batteries | Rayovac®*

1x 6ft micro USB cable

1x USB wall charger, ultra compact,

single port 5.0V-100mA output

(Input: AC100-240V 50/60Hz)

1x Pre-Filter

1x Carbon Filter

1x Ultra Filter

1x Inlet hose

1x Outlet hose

1x Hose clip

1x Carrying case

1x Back-washing syringe

1x User manual

SURViVOR FiLTER

Pre-Filter

Ultra Filter Carbon Filter

Inlet Hose

Outlet Hose

USB Cable Syringe

Wall Charger

AA Batteries

*Not included on

Amazon purchases

Carrying case

Survivor Filter®

PORTABLE WATER FILTER

Priming

the ﬁlter

©SURVIVOR FILTER | 1.888.602.6367 | SURVIVORFILTER.COM/CONTACT

PRIME THE FILTER

Unscrew and remove the ﬁlters

from the top of the device.

Fill the chamber up halfway

with clean water.

Re-insert the ﬁlters and screw

on the top ﬁlter assembly

back in place.

The PRO X is now ready to use!

Power it on and watch it ﬁlter

effortlessly.

Remove ﬁlters

Fill with water

Reassemble

Ready to use!

PRO TIP: The PRO X is a precision device. For trouble-free performance, prime the

PRO X before ﬁrst use, or when taking it out after long-term storage. Priming will

prevent motor damage from any impurities ﬂowing into the pump.

Unscrew and remove

Fill with clean water

Re-insert ﬁlters Next, power

on the PRO X

Survivor Filter®

PORTABLE WATER FILTER

Ways to

Power

©SURVIVOR FILTER | 1.888.602.6367 | SURVIVORFILTER.COM/CONTACT

WAYS TO POWER YOUR PRO X

External battery packs

USB wall charger

2-AA batteries

Slide open the battery cover, insert the

batteries and close the cover. Make

sure the cover is closed properly to

ensure a water resistant seal.

Open the USB cover and connect

the micro USB cable to the PRO X.

Connect the other end to your power

source. Compatible with any 120-240v

external battery pack.

Open the USB cover and connect

the micro USB cable to the PRO X.

Connect the other end to the USB wall

charger and plug into the wall. This

power supply will output 5V 1a and has

an input: AC 100-240v.

Operating ambient temperature:

5° to 25° C (41° to 77° F)*

Non operating temperature:

0° to 27° C (32° to 80° F)*

2-AA baeries

External baery packs

Wall outlet

Environmental requirement:

*not included

Survivor Filter®

PORTABLE WATER FILTER

How

it works

©SURVIVOR FILTER | 1.888.602.6367 | SURVIVORFILTER.COM/CONTACT

Stage 1: Pre-Filter

The Ultra Filter Pre-Filter is

the ﬁrst stage of ﬁltration.

It traps large particles and

removes: algae, giardia, e.coli,

protozoa, and cryptosporid-

ium. At 0.1 micron, this ﬁlter

can be reused up to 100,000

liters (26,417 gal).

The ﬁnal stage of ﬁltration is

the Ultra Filter. Independent

tests have shown this ﬁlter

can remove 99.999% of

tested virus and staph.

At 0.01 micron, this ﬁlter

can be reused up to

100,000 liters (26,417 gal).

Stage 3: Ultra Filter

HOW IT WORKS

Located inside the chamber,

the Carbon Filter is designed

to help reduce heavy metals,

chemicals, pollutants, and

odor, while improving water

taste. It can be reused up to

2,000 liters (528 gal).

Stage 2: Carbon Filter

Survivor Filter®

PORTABLE WATER FILTER

Cleaning

the ﬁlter

©SURVIVOR FILTER | 1.888.602.6367 | SURVIVORFILTER.COM/CONTACT

visit: survivorﬁlter.com/prox

for a video demo

CLEANING THE FILTERS

Fill the syringe with clean water, or

1:1 vinegar to water ratio, and attach

it to the Pre-Filter or Ultra Filter tip.

Push the clean water from the syringe

through. Repeat as necessary to

dislodge any trapped particles.

Using the syringe

Soak the Carbon Filter in clean water

for 15 minutes. After soaking, remove

the ﬁlter from the clean water and

shake out the ﬁlter to remove any

excess water. Never clean your carbon

ﬁlter with anything except water.

Remember to air dry your ﬁlters for

a minimum of 24 hours after cleaning

to prevent any moisture from

accumulating during storage.

Cleaning the three ﬁlters after each

trip greatly extends their life.

Carbon Filter cleaning

Always air dry the ﬁlters

Clean aer every use

*Only clean with water

Ultra Filter

Pre-Filter

Carbon Filter

Survivor Filter®

PORTABLE WATER FILTER

Tips &

tricks

TIPS & TRICKS

We’ve got you covered

Winter usage

Tested in the USA to NSF/ANSI

standards to ﬁlter: bacteria, staph,

parasites and virus to 99.999%.

It also signiﬁcantly reduces heavy

metals, making it safe to use in

most natural bodies of water

throughout the world.

Ensure you keep your ﬁlter insulated

in your jacket or sleeping bag in

sub-zero temperatures. Be sure your

ﬁlter is also completely free of water

before storing away. If you ensure

the ﬁlters are completely free of

water, then the risk of damaging the

ﬁlters are much lower.

If you’re looking to test how well

our ﬁlter works on pathogens, we

recommend testing on water from

the outdoors that hasn’t been treated

with chlorine (ie. tap water). Pre-test

the dirty water, run the water through

the ﬁlter, then test again to see a

dramatic TDS drop.

Heavy polluted water or water with

a high concentration of silt will clog

the Pre-Filter more quickly. To

prevent heavy sediment from

clogging the Pre-Filter: collect water

from the source in a large container

and let it sit for 10 minutes to allow

the mud to separate. Then, ﬁlter

as normal.

Storing away? Disassemble

completely and air dry for a minimum

of 24 hours, then store away. Perform

a vigorous shake test to see if there

is any excess water left inside.

All of our ﬁlter systems are made to

ﬁlter fresh water sources, or

municipal tap water only. Some

examples of fresh water sources

include: lakes, rivers, streams

and ponds.

TDS Testing

Prevent clogging

Air dry it out

Say NO to salt water

Survivor Filter®

SURVIVOR FILTER is a company with a simple goal -

to provide people with access to clean water in any

environment when they need it most.

Lifetime Warranty

Replacements

Contact

SURVIVORFILTER.COM

Survivor Filter provides a Lifetime Replacement

Warranty against manufacturing defects on purchases.

To read more about our Lifetime Warranty, visit:

survivorﬁlter.com/warranty

To purchase replacement parts and ﬁlters, visit:

survivorﬁlter.com

For ﬁltration testing reports, frequently asked

questions, international manuals or general inquires,

visit: survivorﬁlter.com or call us at 1-888-602-6367

SURVIVOR FILTER L800 User guide

SURVIVOR FILTER L800 User guide

SURVIVOR FILTER L800 User guide

Related papers

Other documents