SACKit 2AO5W CHARGEITDD Dual Wireless Charging Pad User manual

Type
User manual

SACKit 2AO5W CHARGEITDD Dual Wireless Charging Pad allows you to wirelessly charge two devices simultaneously. To achieve optimal charging performance, SACKit recommends using a QC3.0 adapter with an output of 9V/3A. Please note that using a QC1.0/QC2.0 adapter may result in overheating or damage to the device. To begin charging, simply place your Qi-enabled devices on the designated "X" marks on the charging pad.

Key Features:

  • Dual Wireless Charging: Charge two devices simultaneously.
  • Fast Charging: Supports fast wireless charging capabilities.
  • LED Indicator: Provides visual indication of the charging status.

SACKit 2AO5W CHARGEITDD Dual Wireless Charging Pad allows you to wirelessly charge two devices simultaneously. To achieve optimal charging performance, SACKit recommends using a QC3.0 adapter with an output of 9V/3A. Please note that using a QC1.0/QC2.0 adapter may result in overheating or damage to the device. To begin charging, simply place your Qi-enabled devices on the designated "X" marks on the charging pad.

Key Features:

  • Dual Wireless Charging: Charge two devices simultaneously.
  • Fast Charging: Supports fast wireless charging capabilities.
  • LED Indicator: Provides visual indication of the charging status.
80*100mm
1:1
无线充电器说明书
FD17 ST10
/
128gFSC认证哑粉纸 四色印刷
装骑马钉
2020.7.7
1.0
CHARGEit Dual Dock
QUICK START GUIDE
Danish design Wireless fast charging
LED indicator Dual wireless charging
QUICK START GUIDE (DK)
medfølger ikke)
Vi anbefaler QC3.0 output 9V/3A
-
nalitet af CHARGEit Dual Dock. Brug af en QC1.0/QC2.0 adapter kan resultere
i en overophedet enhed og kan skabe defekter i produktet. Ved opladning af
ved brug af en QC1.0/QC2.0 adapter. QC3.0 adaptere kan nemt købes på diverse
Brug CHARGEit Dual Dock
Brugermanual
Advarsel: Læs brugsanvisningen før du tager produktet i brug. Hent bruger
manual online på følgende link: sackit.dk/support. Her kan du downloade bru -
-
Plug CHARGEit Dual Dock to a power supply with the supplied USB-C cable
(adaptor not included)
Choose the correct adaptor for CHARGEit Dual Dock
of CHARGEit Dual Dock.
We recommend QC3.0 output 9V/3A
SACKit recommends that you choose a QC3.0 adaptor to achieve the best
two devices at once require more power than what a QC1.0/QC2.0 adapter can
deliver. SACKit will not be responsible for any issues or safety hazards arising
from the use of a QC1.0/QC2.0 adaptor. QC3.0 adaptors can be purchased on
various websites.
Use CHARGEit Dual Dock
You can charge up to two devices wirelessly with CHARGEit Dual Dock by
placing your units on the X’s if the units supports wireless charging.
User manual
Warning: Read the user manual thoroughly before using the product. Download
user manual online at: sackit.eu/support. Please download the user manual and
QUICK START GUIDE (UK)
QUICK START GUIDE (NO)
(adapter følger ikke med)
SACKit anbefaler QC3.0 output 9V/3A
SACKit anbefaler at du velger en QC3.0-adapter for å sikre stabiliteten og
QC2.0-adapter kan levere. SACKit vil ikke være ansvarlig for funksjonsfeil
Bruk CHARGEit Dual Dock
-
Bruksanvisning
Advarsel: Les bruksanvisningen før du tar i bruk produktet.
Hent bruksanvisning online på følgende lenke: sackit.no/support. Her kan du
QUICK START GUIDE (DE)
Schließen Sie CHARGEit Dual Dock über das mitgelieferte USB-C Kabel an Strom
an (ein Akku wird nicht mitgeliefert).
Dock
Möglichkeiten zur Auswahl:
SACKit emphielt QC3.0 Output 9V/3A
es zur Überhitzungen führen oder andere Defekte am CHARGEit Dual Dock
Sicherheitsrisiken, die durch den Gebrauch eine QC1.0/QC2.0 Akkus entstanden
Anwendung
Laden Sie Ihren CHARGEit Dual Dock auf, indem Sie Ihr Handy auf dem X plat -
Gebrauchsanleitung
Achtung:
Produkt in Gebrauch nehmen. Laden Sie die Gebrauchsanleitung für den späte -
ren Gebrauch herunter: sackit.dk/support.
Anleitungen un verschiedene Sicherheitshinweise.
SACKit ApS
Lyngvej 1
9000 Aalborg
Denmark
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
FCC ID:
Warning: Changes or modifications to this unit not expressly approved by the part
responsible for compliance could void the user’s authority to operate the
equipment
  • Page 1 1

SACKit 2AO5W CHARGEITDD Dual Wireless Charging Pad User manual

Type
User manual

SACKit 2AO5W CHARGEITDD Dual Wireless Charging Pad allows you to wirelessly charge two devices simultaneously. To achieve optimal charging performance, SACKit recommends using a QC3.0 adapter with an output of 9V/3A. Please note that using a QC1.0/QC2.0 adapter may result in overheating or damage to the device. To begin charging, simply place your Qi-enabled devices on the designated "X" marks on the charging pad.

Key Features:

  • Dual Wireless Charging: Charge two devices simultaneously.
  • Fast Charging: Supports fast wireless charging capabilities.
  • LED Indicator: Provides visual indication of the charging status.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI