JAXPETY All-Terrain Knee Scooter User manual

Brand: JAXPETY

Model: All-Terrain Knee Scooter

Type: User manual

Handle

Lifting Lever

Knee Pad

Star Bolt

Rear Wheel Body

Front Wheel

Removable Storage Bag

Brake Cable

Hand Brake Lock

ASSEMBLY INSTRUCTIONS

PULL BACK TO SLOW DOWN PUSH FORWARD TO BRAKE

MAINTENANCE

1. The exterior of this rollator walker should be cleaned periodically with a soft damp

cloth. Do not use abrasive cleaners or caustic chemicals.

2. Check the parts for any looseness, wear, or damage periodically. If any problems are

found, correct them before using them.

3. If haven’t used it for a long time, store it in a cool,dry, and safe place.

1.Insert the rear wheels into the mainframe and make sure the holes are aligned

2.Insert the screw into the hole and secure the “star bolt”

2STEP

REAR WHEELS INSTALLATION

1. 2. 3. 4.

Open the mainframe and lock the lever

If you ﬁnd the frame is unsteady, please tighten the screw

1STEP

ROLLATORS POLE INSTALLATION

4. 5.

2. 3.

3STEP

LIFTING LEVER INSTALLATION

1.Insert the lifting lever into the mainframe

2.Adjusting the suitable height, then make sure the holes are aligned

3.In

4.Attach the Card buckle to the lifting rod

sert the star bolt into the hole and tighten it

PART LIST

Rear wheel Mainframe Knee pad Bag

Star bolt / Screw Star screw Bag screw

A x 2 Bx 1 x 2

Installation tool

1.Insert the knee pad into the tube

2.Adjusting the suitable height , then make sure the holes are aligned

3.Insert the screw into the hole and secure the star bolt

4STEP

KNEE PAD INSTALLATION

1. 2. 3.

Make sure the holes are aligned, then insert the screw into the hole and secure the nut with a tool,

5STEP

BAG INSTALLATION

1. 2. 3.

JAXPETY All-Terrain Knee Scooter User manual

JAXPETY All-Terrain Knee Scooter User manual

JAXPETY All-Terrain Knee Scooter User manual

Other documents