Omega Engineering LDX-2 is a 2-wire 4-20mA loop powered transmitter designed for use with ac inductive-type LVDT displacement transducers. It will operate with most of OMEGA's LD200 & 300 transducers. The LDX-2 has onboard oscillator, amplifier, demodulator and filter circuit with voltage-to-current converter. It has selectable gains for full-scale outputs from ±0.050in. to ±5.0in. and two selectable filter settings.
Omega Engineering LDX-2 is a 2-wire 4-20mA loop powered transmitter designed for use with ac inductive-type LVDT displacement transducers. It will operate with most of OMEGA's LD200 & 300 transducers. The LDX-2 has onboard oscillator, amplifier, demodulator and filter circuit with voltage-to-current converter. It has selectable gains for full-scale outputs from ±0.050in. to ±5.0in. and two selectable filter settings.
-
1
-
2
-
3
-
4
-
5
-
6
Omega Engineering LDX-2 is a 2-wire 4-20mA loop powered transmitter designed for use with ac inductive-type LVDT displacement transducers. It will operate with most of OMEGA's LD200 & 300 transducers. The LDX-2 has onboard oscillator, amplifier, demodulator and filter circuit with voltage-to-current converter. It has selectable gains for full-scale outputs from ±0.050in. to ±5.0in. and two selectable filter settings.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Omega PSW-580 series Owner's manual
-
-
-
-
-
-
-
-
-