2. Kichler Lighting
  3. 43686NI

Kichler Lighting 43686NI User manual

  • Hello! I am an AI chatbot trained to assist you with the Kichler Lighting 43686NI User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT SAFETY INSTRUCTIONS
LIGHTED BULB IS HOT!
WARNING: To reduce the risk of FIRE or INJURY TO PERSON:
• Turnoffandallowtocoolbeforereplacingbulb.
• BulbgetsHOTQUICKLY!Contactswitchonlywhenturningoff.
• DONOTremaininlightifskinfeelswarm.(Lightisintense,
maycause“sunburn”)
• DONOTlookdirectlyatlightedbulb.
• Keepmaterialsawayfrombulbthatmayburn.
• UseONLYwithwattagespeciedorlower.
• DONOTtouchbulbatanytime,useasoftcloth.Oilfromskin
maydamagebulb.
• DONOToperatexturewithmissingordamagedglass.
1) Passxturewirefromeachcouplingontopofxture
throughonestemforeachsideandscreweachsteminto
eachcoupling.NOTE: Threadlockingcompoundmustbe
appliedtoallstemthreadsasnotedwithsymbol(3)to
preventaccidentalrotationofxtureduringcleaning,
relamping,etc.
2) Passxturewirethroughremainingstemsandscrewstems
together.
3) Threadonesmallthreadedpipeintoendofeachsmallloop.
4) Passxturewirethroughrstloop.Threadonerstloop
ontoendofeachlaststem.
5) Passxturewirethroughsecondloopandthroughholein
canopy.Passthreadedpipeatendofsecondloopthrough
holeincanopy.
6) Passxturewirethroughholeinlockwasher.Thread
lockwasherontoendofthreadedpipeprotrudingfrom
insidecanopy.
7) Passxturewirethroughholeinhexnut.Threadhexnutonto
endofthreadedpipe.
8) Repeatsteps5-7toattachlaststemtocanopy.
9) Attachchainlinktosmallloopatendofeachstemandto
eachlooponcanopy.
10) TURN OFF POWER.
IMPORTANT:Beforeyoustart,NEVERattemptanywork
withoutshuttingofftheelectricityuntiltheworkisdone.
a) Gotothemainfuse,orcircuitbreaker,boxinyour
home.Placethemainpowerswitchinthe“OFF”
position.
b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreaker
switch(s),thatcontrolthepowertothextureorroom
thatyouareworkingon.
c) Placethewallswitchinthe“OFF”position.Ifthexture
tobereplacedhasaswitchorpullchain,placethosein
the“OFF”position.
11)Findtheappropriatethreadedholesonmountingstrap.
Assemblemountingscrewsintothreadedholes.
12)Attachmountingstraptooutletbox.(Screwsnotprovided).
Mountingstrapcanbeadjustedtosuitpositionofxture.
13)Groundinginstructions:(SeeIllus.AorB).
A) Onxtureswheremountingstrapisprovidedwitha
holeandtworaiseddimples.Wrapgroundwirefrom
outletboxaroundgreengroundscrew,andthreadinto
hole.
B) Onxtureswhereacuppedwasherisprovided.Attach
groundwirefromoutletboxundercuppedwasherand
greengroundscrew,andthreadintomountingstrap.
Ifxtureisprovidedwithgroundwire.Connectxture 
groundwiretooutletboxgroundwirewithwireconnector
(notprovided.)afterfollowingtheabovesteps.Never
connectgroundwiretoblackorwhitepowersupplywires.
MOUNTINGSTRAP
ABRAZADERADEMONTAJE
CANOPY
ESCUDETE
DateIssued:10/17/14 IS-43686-US
GREEN GROUND
SCREW
CUPPED
WASHER
A
B
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
KNURLKNOB
PERILLAESTRADA
SMALLLOOP
ARGOLLA
PEQUEÑA
CHAINLINK
ESLABÓNDECADENA
STEM
VASTAGO
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
GLASS
VIDRIO
14) Makewireconnections(connectorsnotprovided).Reference
chartbelowforcorrectconnectionsandwireaccordingly.
15) Pushxturetoceiling,carefullypassingmountingscrews
throughholesincanopy.
16) Threadknurlknobsontomountingscrews.Tightenknurl
knobstosecurexturetoceiling.
17) Raiseglassuptoxture.Passtopofglassthroughholein
bottomofxturebody.Passholeinglassoversocket.
18) Slipspaceroversocket.
19) Attachsocketringtosocketringtool.
20) Raisesocketringtoolwithsocketringattacheduptoxture
Passsocketringtoolwithsocketringattachedthroughholein
glass.Threadsocketringontosocket.Tightensocketringto
secureglassinplace.(DONOTovertighten.)
21) Insertrecommendedbulb.CAUTION: DONOTtouchbulb
withbarehands.Ifthishappens,cleanbulbwithdenatured
alcoholandalintfreecloth.
22) Slipglasssleeveoverbulb.Carefullythreadglasssleeve
ontosocket.(DONOTovertighten.)
HEXNUT
TUERCA
HEXAGONAL
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
LOCKWASHER
ARANDELADE
SEGURIDAD
3
3
3
SOCKETRING
ANILLODELCASQUILLO
SPACER
ESPACIADOR
SOCKETRINGTOOL
HERRAMIENTADEL
ANILLODELCASQUILLO
FIXTUREBODY
CUERPODELARTEFACTO
BULB
BOMBILLA
GLASSSLEEVE
CAMISADEVIDRIO
/