IMPORTANT SAFETY INSTRUCTIONS
LIGHTED BULB IS HOT!
WARNING: To reduce the risk of FIRE or INJURY TO PERSON:
• Turnoffandallowtocoolbeforereplacingbulb.
• BulbgetsHOTQUICKLY!Contactswitchonlywhenturningoff.
• DONOTremaininlightifskinfeelswarm.(Lightisintense,
maycause“sunburn”)
• DONOTlookdirectlyatlightedbulb.
• Keepmaterialsawayfrombulbthatmayburn.
• UseONLYwithwattagespeciedorlower.
• DONOTtouchbulbatanytime,useasoftcloth.Oilfromskin
maydamagebulb.
• DONOToperatexturewithmissingordamagedglass.
1) Passxturewirefromeachcouplingontopofxture
throughonestemforeachsideandscreweachsteminto
eachcoupling.NOTE: Threadlockingcompoundmustbe
appliedtoallstemthreadsasnotedwithsymbol(3)to
preventaccidentalrotationofxtureduringcleaning,
relamping,etc.
2) Passxturewirethroughremainingstemsandscrewstems
together.
3) Threadonesmallthreadedpipeintoendofeachsmallloop.
4) Passxturewirethroughrstloop.Threadonerstloop
ontoendofeachlaststem.
5) Passxturewirethroughsecondloopandthroughholein
canopy.Passthreadedpipeatendofsecondloopthrough
holeincanopy.
6) Passxturewirethroughholeinlockwasher.Thread
lockwasherontoendofthreadedpipeprotrudingfrom
insidecanopy.
7) Passxturewirethroughholeinhexnut.Threadhexnutonto
endofthreadedpipe.
8) Repeatsteps5-7toattachlaststemtocanopy.
9) Attachchainlinktosmallloopatendofeachstemandto
eachlooponcanopy.
10) TURN OFF POWER.
IMPORTANT:Beforeyoustart,NEVERattemptanywork
withoutshuttingofftheelectricityuntiltheworkisdone.
a) Gotothemainfuse,orcircuitbreaker,boxinyour
home.Placethemainpowerswitchinthe“OFF”
position.
b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreaker
switch(s),thatcontrolthepowertothextureorroom
thatyouareworkingon.
c) Placethewallswitchinthe“OFF”position.Ifthexture
tobereplacedhasaswitchorpullchain,placethosein
the“OFF”position.
11)Findtheappropriatethreadedholesonmountingstrap.
Assemblemountingscrewsintothreadedholes.
12)Attachmountingstraptooutletbox.(Screwsnotprovided).
Mountingstrapcanbeadjustedtosuitpositionofxture.
13)Groundinginstructions:(SeeIllus.AorB).
A) Onxtureswheremountingstrapisprovidedwitha
holeandtworaiseddimples.Wrapgroundwirefrom
outletboxaroundgreengroundscrew,andthreadinto
hole.
B) Onxtureswhereacuppedwasherisprovided.Attach
groundwirefromoutletboxundercuppedwasherand
greengroundscrew,andthreadintomountingstrap.
Ifxtureisprovidedwithgroundwire.Connectxture
groundwiretooutletboxgroundwirewithwireconnector
(notprovided.)afterfollowingtheabovesteps.Never
connectgroundwiretoblackorwhitepowersupplywires.
MOUNTINGSTRAP
ABRAZADERADEMONTAJE
CANOPY
ESCUDETE
DateIssued:10/17/14 IS-43686-US
GREEN GROUND
SCREW
CUPPED
WASHER
A
B
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
KNURLKNOB
PERILLAESTRADA
SMALLLOOP
ARGOLLA
PEQUEÑA
CHAINLINK
ESLABÓNDECADENA
STEM
VASTAGO
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
GLASS
VIDRIO
14) Makewireconnections(connectorsnotprovided).Reference
chartbelowforcorrectconnectionsandwireaccordingly.
15) Pushxturetoceiling,carefullypassingmountingscrews
throughholesincanopy.
16) Threadknurlknobsontomountingscrews.Tightenknurl
knobstosecurexturetoceiling.
17) Raiseglassuptoxture.Passtopofglassthroughholein
bottomofxturebody.Passholeinglassoversocket.
18) Slipspaceroversocket.
19) Attachsocketringtosocketringtool.
20) Raisesocketringtoolwithsocketringattacheduptoxture
Passsocketringtoolwithsocketringattachedthroughholein
glass.Threadsocketringontosocket.Tightensocketringto
secureglassinplace.(DONOTovertighten.)
21) Insertrecommendedbulb.CAUTION: DONOTtouchbulb
withbarehands.Ifthishappens,cleanbulbwithdenatured
alcoholandalintfreecloth.
22) Slipglasssleeveoverbulb.Carefullythreadglasssleeve
ontosocket.(DONOTovertighten.)
HEXNUT
TUERCA
HEXAGONAL
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
LOCKWASHER
ARANDELADE
SEGURIDAD
3
3
3
SOCKETRING
ANILLODELCASQUILLO
SPACER
ESPACIADOR
SOCKETRINGTOOL
HERRAMIENTADEL
ANILLODELCASQUILLO
FIXTUREBODY
CUERPODELARTEFACTO
BULB
BOMBILLA
GLASSSLEEVE
CAMISADEVIDRIO