2. System Sensor
  3. SA: TR-HS, TRC-HS, TRW-HS and TRCW-HS

System Sensor SA: TR-HS, TRC-HS, TRW-HS and TRCW-HS User manual

  • Hello! I am an AI chatbot trained to assist you with the System Sensor SA: TR-HS, TRC-HS, TRW-HS and TRCW-HS User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Instructions for SpectrAlert Advance
Horn, Horn-Strobe, Strobe, Chime and Chime Strobe Trim Ring
Follow the instructions below for installing trim ring models TR-HS, TRW-HS, TRC-HS, and TRCW-
HS with the SpectrAlert Advance Series horn, horn-strobe, strobe, chime and chime strobe devices.
1 – Align two screw holes on the SpectrAlert Advance mounting plate to the corresponding
screw holes on the trim ring (see diagram).
2 – Align the two screw holes on the 4˝ x 4˝ x 1 1/2˝, Single gang, Double Gang or 4” octagon
back boxes with the screw holes on the mounting plate. Tighten the mounting plate to the
back box.
SS-110-002 I56-3300-000
I56-3300-000
A0619-00
A0620-00
/