Sunricher SR-2830CDMX User manual

Brand: Sunricher

Model: SR-2830CDMX

Type: User manual

Sunricher SR-2830CDMX is a wall-mounted DMX512 master with a glass interface and touch-sensitive buttons. It allows for adjusting RGB and color temperature of connected LED lighting. The device features four zones, each of which can be controlled individually or synchronized. The SR-2830CDMX offers smooth brightness dimming, 10 built-in running modes for RGB lighting, and the ability to save and recall color settings.

RF Wall Mounted DMX512 Master

SR-2830CDMX

Parameter

Wiring diagram

Product Size

29.1

86.0

Backlight

Glass interface

Touch sensitive

Adjust RGB & color temperature

Feature

Installation

r S

Part No.

Iuput Voltage

Size

SR-2830CDMX

12-24VDC

86x86x29.1

DMX512 Signal

Output

D- GNDVin D+

Power Supply

12-36VDC

110V-230VAC

SR-2830CDMX

GND

Power Supply

12-24VDC

110V-230VAC

SR-2102B

DMX51 2 Decod er

GND

whi te

WW LED Strip

CW LED Strip

WW LED Strip

CW LED Strip

SR-2102B

DMX51 2 Decod er

GND

whi te

SR-2102B

DMX51 2 Decod er

GND

whi te

ISO 9001：20 00

Operation

Attention

1) The product shall be installed with qualified person

For updated information please consult your supplier.

6) Please ensure that the cable is secured tightly in the connector

5) Never connect any cables while power is on and always assure correct connections to avoid

short circuits before switching on.

4) Please check if the output voltage of any LED power supplies used comply with the working

voltage of the product.

3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.

2) IP20.Please avoid the sun and rain. When installed outdoors, please

ensure it is mounted in a water proof enclosure.

3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.

1) We provide lifelong technical assistance with this product:

For faults beyond the 3-year warranty we reserve the right to charge for time and parts.

Any damages caused by unauthorized removal, maintenance, modifying, incorrect

connection and replacement of chips.

Any damages due to transportation, vibration etc. after purchase.

Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.

Any damages caused by negligence, inappropriate storing at high temperatures and

humidity or near harmful chemicals.

Limited Warranty

Any defects caused by wrong operation.

Warranty Agreement

5-year warranty. We print produce date on every products, for example :1125 means

year 2011,week 25.The warranty is for free repair or replacement and covers

manufacturing faults only.

Description of buttons

ON/OFF button

Hold finger down over 3 seconds

connected lighting flashes.

It saves color or mode

RGB running mode. 10 built-in mode

Smooth brightness dimming:0.1-100%

Control 1 zone:cw+ww lighting

Control 2 zone:cw+ww lighting

Control 1 zone:RGB lighting

Control 2 zone:RGB lighting

When you touch or button,

then touch rainbow, it will dim cw+ww or RGB

Save and recall

Save: Touch any zone button

Touch color slider to get a color→

Hold S button for over 3 seconds, connected light flick means successfully saved.

Recall: Short touch button S →Recall the color saved.

Note : only can learn for LED CW+WW lighting.

only can learn for LED RGB lighting.

Running mode

There are 10 build-in modes in button, which running modes are only for RGB lighting.

Short press on button to run mode. Hold finger down on button can speed up /down.

Dimming

Hold your finger down on button ,brightness will dim smoothly from 0.1% to 100%.

Four zones can be switch

on/off by short press.

After connect well with DMX decoders, please set the DMX decoders

address as below:

DMX decoder’s address 001 is controlled by 1 zone :cw+ww lighting

DMX decoder’s address 005 is controlled by 2 zone :cw+ww lighting

DMX decoder’s address 009 is controlled by 1 zone :RGB lighting

DMX decoder’s address 013 is controlled by 2 zone :RGB lighting

Short press zone number is to choose a zone, long press zone number is turn on/off that zone individually

To synchronize several zones, short press 2 or more buttons one after another, then touch the color wheel

How to operate zone button

Note: CCT zones and RGB zones are not available to synchronize at the same time.

Sunricher SR-2830CDMX User manual

Sunricher SR-2830CDMX User manual

Sunricher SR-2830CDMX User manual

Related papers

Other documents