Audiovox AN300 User manual

Hello! I am an AI chatbot trained to assist you with the Audiovox AN300 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Single Amplified

Windshield Mounted TV Antenna

This TV Antenna is designed to provide good reception on the

difficult to receive VHF channels 2-13.

Mounting Temperature should be 50 degrees or higher.

128-5722

Model AN-300

1.Clean all mounting surfaces with ammonia or alcohol.

2.Screw the telescopic elements onto the mounting base. Loosen

trim above the windshield and right corner. Most corner trim are

snap-in style.

3.Remove adhesive backing and mount antenna above the rear view

mirror, as close as possible to the trim. On some vehicles the

antenna can be placed at dash level.

4.Place small clip on each element, about 6 inches from tip.

5.Tuck cable under trim and tighten.

6.Route cable under the dash and attach to the amplifier to the

amplifier input. Attach the positive and the negative leads to the

12 VDC power source. Attach amplifier to antenna input on the TV.

indshieldindshield

indshield

ear View Mirrorear View Mirror

ear View Mirror

12 V12 V

12 V

olt DColt DC

olt DC

AmpAmp

Amp

NegNeg

Neg

(Black)(Black)

(Black)

os.os.

os.

(R(R

ed)ed)

ed)

128-5722

Released 2-11-00.

Print BLACK Lettering on WHITE Background