Installation Considerations | 12
Supported Aruba Switches
SKU Product Description Supported Switches
R8D18AAE Aruba Fabric ComposerDevice Management Service Tier 3 Switch
1 Year Subscription E-STU 6300
R8D18AAE Aruba Fabric ComposerDevice Management Service Tier 3 Switch
3 Year Subscription E-STU 6300
R8D20AAE Aruba Fabric ComposerDevice Management Service Tier 3 Switch
5 Year Subscription E-STU 6300
R7G99AAE Aruba Fabric ComposerDevice Management Service Tier 4 Switch
1 Year Subscription E-STU 10K, 6400, 8100, 8400, 8325,
8360, 9300
R7H00AAE Aruba Fabric ComposerDevice Management Service Tier 4 Switch
3 Year Subscription E-STU 10K, 6400, 8100, 8400, 8325,
8360, 9300
R7H01AAE Aruba Fabric ComposerDevice Management Service Tier 4 Switch
5 Year Subscription E-STU 10K, 6400, 8100, 8400, 8325,
8360, 9300
Supported VM Hypervisors
nVMware vSphere versions 6.7, 7.0, and 8.0
nLinux KVM
nNutanix AHV
Operating System
The installation deploys a Linux (CentOS 7) operating system.
Host Environment - Network Settings
Determine the following network settings:
nIP Addressing Type: The host IPv4 address can be either a static IP (default) or DHCP.
nStatic IP: You need to determine a static IP address, netmask, default gateway, and DNS server
information.
nDHCP: The installer supports DHCP. When using DHCP, ensure that the host IP address does not
change. For example, on the DHCP server, you should add a DHCP reservation and/or DNS hostname
entry on your DHCP/DNS server(s).
nHostname: You need a hostname for your Aruba Fabric Composer VM.
nDomain name: You must provide a valid DNS domain name for the domain in which the Aruba Fabric
Composer VM resides. If the network/deployment environment does not have a domain, you can use
localdomain as the domain name.
nNTP Server(s): If your network environment includes NTP servers, it is recommended configuring your
Aruba Fabric Composer VM to use these server(s) to ensure accurate time synchronization between
Aruba Fabric Composer and the switches. When using a static IP address for Aruba Fabric Composer,
you must specify the NTP server(s) to use. If you use DHCP, NTP servers will be automatically used,
Chapter 5 | Installation Considerations