Sharper Image One Touch Sparkling Water Maker and Dispenser User manual

Brand: Sharper Image

Model: One Touch Sparkling Water Maker and Dispenser

Type: User manual

USER GUIDE USER GUIDE

User Guide User Guide

2 15

User Guide User Guide

CONGRATULATIONS ON BEING PART

OF THE UNBOTTLED MOVEMENT

Our patented Carbon8 Reactor mixes water and CO2 instantly, creating an infinite stream of sparkling water.

All you need to do is use the touch button on the top of the device and sparkling water is beautifully dispensed

into any glass or bottle.

Get rid of wasteful PET bottles that need to be filled and attached to the carbonator.

The removable 2-liter water tank can be stored in your refrigerator or refilled with cold water and even ice.

A UV light is integrated into the water tank to eradicate bacteria, viruses, microcontaminants, and algae, to

ensure ultra-clean sparkling water.

Note: Products that include gas under high pressure should always be handled with care. Please read

carefully the safety guidelines and the manual of the product before using it.

Keep this user guide for further reference. Make sure to include this guide when passing on the Carbon8 to

third parties.

WE CREATED THE CARBON8 INFINITY STREAM WITH ONE MISSION IN MIND:

A SUSTAINABLE INSTANT SPARKLING WATER DISPENSER THAT IS EASIER TO USE

THAN ANY EXISTING SYSTEM.

User Guide User Guide

IMPORTANT SAFETY INSTRUCTIONS

When using electric appliances, basic precautions should always be

followed, including the following:

Read all the instructions before using the appliance.

The Carbon8 is designed and intended to private use (at home and in

the office) and is Household use only. The manufacturer only guarantees

household issues.

The manufacturer is not responsible for any consequences and faults

caused by not following the instructions.

The warranty does not cover:

Commercial use.

Negligent use or misuse of the product.

Use with incorrect voltage or current.

Use contrary to the operating instructions.

Disassembly, repair, or modification by anyone other than the

manufacturer.

Damage caused by accidents or disasters, such as fire, flood,

earthquake, war, vandalism, or theft.

Normal wear and tear.

•

Before the first use, rinse the water tank with lukewarm water. Alternatively, you can use a soft cleaning sponge (or cloth) and a non-irritating

detergent to clean the water tank.

SPECIAL REMINDER

1. Caution for Ultraviolet radiation: The Sparkling Water Maker is using

Ultraviolet light. Do not look at the UV light directly because this can

irritate the eyes and skin.

2. Do not use the product around flammable objects, and do not place

it next to objects that can be easily deformed by heat. The product

should not be used on surfaces such as carpets and plastic.

3. Always place the product on a dry, stable, flat, and horizontal surfa-

ce.

4. Keep the product away from heat and in or close to areas where the

surrounding temperature is relatively hot (e.g. stoves or other sour-

ces of heat). Never use the device near an open fire (such as burning

candles) or on hot surfaces.

5. Never heat the product in a microwave oven.

6. Do not touch the product with sharp or abrasive objects to avoid

damaging the inner liner of the water tank and the surface of

the product. Under no circumstances use aggressive cleaning

agents, cleaning alcohol, or other chemical solutions since these

can penetrate the housing or impair functionality.

7. To reduce the risk of electrical shock, Do not immerse key parts

such as the main body, power cord, and power plug in water or

other liquids. It is not allowed to rinse the main body with water,

to prevent the water from leaking into the electrical circuit and

causing malfunctions. Do not place or store appliance where it

can fall or be pulled into a tub or sink.

8. Do not attempt to repair, disassemble or assemble the main

body or the power cord of this product by yourself.

WARNING!

Carbon8 is not responsible and liable for

incidental or consequential damages. The only

remedy for the consumer is to have the product

repaired or replaced according to the terms

and conditions of this warranty. Some local

laws may not allow the exclusion or limitation

of these damages, so these exclusions do not

apply to you.

If Carbon8 or its authorized agents determi-

ne that the malfunction or damage to your

Sparkling Water Maker is not covered by the

warranty, Carbon8 will repair the Sparkling

Water Maker only upon payment of the deter-

mined repair charge.

Your Sparkling Water Maker has been desig-

ned to operate with a Carbon8 CO2 Cylinder.

The use of another CO2 Cylinder is not

recommended as they may not be compati-

ble with a Carbon8 Sparkling Water Maker.

Damages resulting from the use of a cylinder

other than the Carbon8 CO2 Cylinder or the

use of the Carbon8 CO2 Cylinder not fo-

llowing the instructions included in this user

guide are not covered by the warranty.

If your Sparkling Water Maker needs warranty

service, please contact Carbon8 Customer

Service by visiting www.carbon8water.com.

A representative will give you specific instruc-

tions on how to arrange for the shipment of

your machine, at your expense, to one of our

authorized service centers. Only Carbon8, or its

agents, are authorized to provide warranty re-

pairs or service to your Sparkling Water Maker.

THIS WARRANTY DOES NOT COVER THE

CO2 CYLINDERS

NON-WARRANTY SERVICE

CARBON8

CO2 CYLINDERS

SPARKLING WATER MAKER

WARRANTY SERVICE

CUSTOMER SUPPORT

If you have problems with your machine, please

go through the following steps:

1. Check the troubleshooting guide on

carbon8water.com and try the suggested

solutions.

2. Contact us at support@carbon8water.com.

We will answer within 24 hours on week-

days.

User Guide User Guide

CARBON8

LIMITED WARRANTY

We want you to be completely happy with your Carbon8 Sparkling Water

Maker.

Therefore, we’ve taken great care to ensure its quality and safety. But in

the unlikely event that something goes wrong with your machine within

1 (one) year of purchase (or according to speciﬁc country laws), and

we determine the problem is due to faulty workmanship or materials,

Carbon8 will repair or replace the product free of charge within the

limitations set out in this warranty.

Carbon8 may replace your Sparkling Water Maker with a reconditioned

Sparkling Water Maker, or an equivalent one if the model you purchased

is no longer available. No refunds shall be given. This limited warranty

is available to consumers who purchased the Sparkling Water Maker for

personal, family, or household use.

This warranty does not apply if the product is damaged due to:

Abuse, misuse, alteration of the Sparkling Water Maker, not following

the guidelines mentioned in this user guide, or commercial use.

Carbonating liquids other than water.

Normal wear and tear.

Modiﬁcation, or repair made by anyone except by Carbon8.

The use of CO2 Cylinders other than those approved by Carbon8

Damages were caused using a faulty gas cylinder.

Accident, shipment, or anything other than normal household use.

•

1. Do not carbonate anything other than water. Other liquids can con-

taminate and clog internal parts, potentially resulting in excessive

pressure and serious injury.

Do not leave the Product unattended. To reduce the risk of injury, clo-

se supervision is necessary when an appliance is used near children.

The Sparkling Water Maker is not a toy. Keep and store it out of the

reach of small children.

Do not operate any appliance with a damaged cord or plug, or after

the appliance malfunctions or is dropped or damaged in any man-

ner. Return appliance to the nearest authorized service facility for

examination, repair, or electrical or mechanical adjustment.

2. This product must use a grounded mains socket with a rated voltage

of 120V, 60Hz. The plug must be fully inserted into the mains socket

to prevent the plug from being overheated and burnt out due to poor

contact, resulting in a short circuit or a fire.

3. The Sparkling Water Maker can be used by children and persons

with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or

instruction concerning the use of the device safely and they unders-

tand the resulting hazards.

4. Children should always be supervised to ensure that they do not

play with this appliance. Cleaning and maintaining this product

should not be done by children without proper supervision.

5. Do not transport the Sparkling Water Maker with the gas cylinder

attached. Always unscrew the gas cylinder during transport. Protect

the product against vibrations and shocks during transport.

6. Only use attachments recommended or sold by the manufacturer.

7. Do not use outdoors.

8. To disconnect, turn all controls to the off (“O”) position, then remove

plug from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the

cord.

10. Unplug from outlet when not in use and before servicing or cleaning.

11. To Reduce the Risk of Electric Shock, this appliance has a polarized

plug (one blade is wider than the other). This plug will fit in a pola-

rized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician

to install the proper outlet. Do not change the plug in any way.

CO2 CYLINDER

To reduce the risk of a CO2 leak, personal injury, and property

damage:

Never use a CO2 Cylinder if damaged. Inspect the CO2

Cylinder and CO2 Cylinder valve before use for dents, punctures,

or other damage. If damaged, contact Carbon8.

Do not manipulate the CO2 Cylinder in any way, including

puncturing, incinerating, or removing the valve.

Do not expose the CO2 Cylinder to heat above 120°F / 50°C,

protect it from sunlight and store it in a well-ventilated area.

Do not remove the CO2 Cylinder from the Sparkling Water Maker

when it is being operated.

Do not handle or remove a CO2 Cylinder while it is discharging CO2.

In the event of a CO2 leak, ventilate the area, breathe fresh air

and if feeling unwell seek immediate medical attention.

•

SAVE THESE INSTRUCTIONS

WARNING!

User Guide User Guide

KEEPING YOUR SPARKLING WATER MAKER

BEAUTIFUL AND CLEAN

This carbonator is made of brushed aluminum. To clean your

carbonator we recommend using a micro ﬁber cloth and water. If

needed you could use some mild soap. Do not use strong detergents

or a cleanser with an abrasive substance.

To clean the water tank use clean lukewarm water with a mild

detergent. If using a dishwasher brush, make sure the brush is

intended to be used for cleaning plastic bottles and do not leave any

scratches. Do not use solvents, strong detergents, or cleansers with

abrasive substances. Do not wash the water tank in a dishwasher.

Remove the drip cover from the tray, dump excess water, and rinse

and dry.

CARBON8 WATER TANK DRIP TRAY

GAS, UV DISINFECTION,

AND WATER FILTER

Our CO2 comes from renewable sources within the agricultural

industry in the United States. That’s because we extract our CO2 from a

source that’s already being released into the atmosphere, rather than

introducing new, unnecessary CO2 that would negatively impact the

environment.

Our CO2 is harvested from the atmosphere using biogas generators

that recapture methane gas that would have been emitted into the

atmosphere by decomposing organic materials.

One step further, it is then purified and certified safe to become a

food-grade gas for sparkling water machines.

UV light is integrated into the water tank to eradicate bacteria, viruses,

micro contaminants, and algae, for clean sparkling water.

Carbon8 is the only Sparkling Water Maker and dispenser

that also offers a filter technology that allows you to use

tap water.

Available in Spring 2023.

The UV disinfection function automatically runs while carbonating

and dispensing the water and will stop as you lift your finger from

the touch control.

Even though the UV light will automatically shut off after you remove

your finger, make sure to not look at the light directly. UV light can

irritate the eyes and skin.

100% RENEWABLE CO2 MADE IN THE USA WATER FILTRATION

UV STERILIZATION

CAUTION:

User Guide User Guide

TOUCH BUTTON

WATER TANK COVER

SPOUT WITH

AMBIENT LIGHT

CO2 COVER

REMOVABLE

SIDE PANEL

DRIP

TRAY

DRIP

MATT

REMOVABLE

WATER TANK

REMOVABLE

AND OPTIONAL

WATER FILTER

UV LIGHT

STERILIZER

POWER

CORD (2M)

PRODUCT OVERVIEW

Start

carbonating

Click and Sip. Now that your water tank is filled with cold water or

even water with ice we are ready to create instant sparkling water.

Different from other carbonators, you don’t have to adjust the

carbonation by giving it multiple pumps to reach a sophisticated

medium-high carbonation level.

The disinfection function will automatically run and the ambient

light will be shining into the glass throughout the carbonation

process.

Press and hold the touch screen button on the top and after

a 2-second delay, sparkling water will flow into your glass or

bottle until the desired sparkling water amount is reached. Lift

your finger to stop with a 1-second delay.

Note that the pump and carbon reactor will charge while

carbonating, and you will hear a humming sound. This is

normal. There is also a small splashy discharge in the end to

purge the line.

We recommend using taller glasses or to hold smaller glasses

closer to the spout to avoid splashes. Some drizzles are normal

as we are using an infinity stream that instantly creates bubbles

into your glass.

User Guide User Guide

SETUP AND INSTALL

THE CO2 CYLINDER

Set the Carbon8 onto the rubber drip mat and Plug the power cord into a

grounded mains socket with a rated voltage of 120V / 60Hz. Make sure the Touch Button light is on.

Remove the magnetic Drip Tray and the CO2 cover.

Remove the seal and the cover from the Carbon8 CO2 cylinder.

Push the cylinder up and screw it clockwise while applying pressure until it is ﬁrmly held in place.

Tilt it back into the body of the Sparkling Water Maker. Hand-tighten only; DO NOT use tools.

Re-attach the cover by ﬁtting the tab at the top of the cover into the slot on top. Push gently the

cover into place. Finally, put the Drip Tray back into place.

When you need to replace the gas cylinder, remove the tray and cover. Grab the bottom of the

cylinder with your index finger and thumb and tilt the cylinder out. Unscrew it counterclockwise

and then carefully pull it out of the compartment.

2.1. 3. 5.4. 6.

Fill the

Water tank

When re-inserted correctly, there is no gap between the bottom

of the tank and the base. Do not carbonate if the tank is not

resting on the base.

Even though Carbon8 works with room temperature water, cold

water carbonates better. Add some ice into the tank or keep the

water tank in the fridge, so you have one ready to carbonate.

Before the first use, rinse the water tank with lukewarm

water. Alternatively, you can use a soft cleaning sponge (or

cloth) and a non-irritating detergent to clean the water tank.

Open the cover and fill the water tank with cold, clean water

up to the marked filling line.

WARNING! Do not carbonate anything other than water. Other

liquids can contaminate and clog the internal parts,

potentially resulting in excessive pressure and serious injury.

To remove the water tank for filling or refrigerated storing,

push the tank back and up.

The Snap-Lock will release the tank, and you can lift it

vertically up.

NOTE: PRO TIP:

Sharper Image One Touch Sparkling Water Maker and Dispenser User manual

Sharper Image One Touch Sparkling Water Maker and Dispenser User manual

Sharper Image One Touch Sparkling Water Maker and Dispenser User manual

Other documents