SportCrafters ROLLER FORK STAND Quick Instructions

Brand: SportCrafters

Model: ROLLER FORK STAND

Type: Quick Instructions

Care and maintenance

 Always wipe off the roller after use to avoid any corrosion to the

drum and/or frame. Use a damp cloth only; do not use any

cleaners.

 Make sure the roller belt is disengaged or fold up the roller after

use. Leaving the belt engaged on the drums will cause the belt to

lose its tension over time.

 Make sure all fasteners are tightened onto the roller frame, and

keep all other fasteners snug. Do not overtighten any fasteners

or you will risk damaging the frame.

 PVC ROLLER MODELS: Do NOT expose your roller to

direct sunlight or excessive heat for extended periods as the

drums may warp.

Warranty

SportCrafters warrants your roller and accessories to be free of

any and all defects in material or workmanship. This warranty

does not apply to parts that have been worn out through normal

use, or damaged through misuse, abuse, neglect, accident, or acts

of God. Where applicable, incidental and consequential damages

are not covered, and there are no other warranties, expressed or

implied, This warranty applies to the original owner, and is valid

for 1 year from the date of purchase.

Please retain your receipt as proof of purchase. We can be

reached by using our contact link on www.sportcrafters.com or at

574-243-4994

ROLLER FORK STAND

The SportCrafters Roller Fork Stand

should be used only with the

SportCrafters aluminum or PVC

folding roller. It’s only coincidence

if it fits any other brand or model.

As with all SportCrafters products,

this unit is 100% made by hand in

Granger, Indiana U.S.A.

SportCrafters Inc

51345 Bittersweet Rd

Granger, IN 46530

574 243 4994

PRECAUTIONS

 THE FORK STAND ALLOWS YOU TO USE THE ROLLER AS A

TRAINING DEVICE BY ASSISTING YOU WITH BALANCE.

BEFORE ATTEMPTING TO RIDE A ROLLER WITHOUT THE

STABILIZER YOU MUST BE FAMILIAR WITH ALL

APPLICABLE INSTRUCTIONS AND PRECAUTIONS. A

ROLLER IS FOR INTERMEDIATE TO ADVANCED CYCLISTS

ONLY. IF YOU ARE UNFAMILIAR AND UNTRAINED IN HOW

TO RIDE A ROLLER, SEEK EXPERIENCED, SUPERVISED

HELP AND READ “RIDING TIPS”

 USE ONLY ON A FLAT AND LEVEL FLOOR.

 DO NOT USE IN DUSTY OR DIRTY CONDITIONS.

 AT ALL TIMES PROTECT THE ROLLER DRUMS FROM

DAMAGE DURING USE AND HANDLING.

Follow instructions provided with your roller to adjust the front

drum to the longest position (if you will be using a shorter-

wheelbase bike) or to the shortest position (if you will be using a

longer-wheelbase bike). In any case, the front roller drum should

clear the stabilizer when it is installed on the roller frame.

Assemble the stabilizer to the frame with 4 J-bolts and knobs as

shown in the sketch. Keep the J-bolts loose as you adjust you r bike

so that the rear wheel cradles properly between the rear drums.

Tighten the J-bolts with the knobs. DON’T use any tools to tighten

any more or you will damage the J-bolts or the roller frame.

Remove your front wheel and assemble your bike to the

skewer using the standard adjustment procedure for quick-

release skewers. If you are unfamiliar with how to adjust

quick-release skewers, please seek professional assistance.

SportCrafters ROLLER FORK STAND Quick Instructions

Brand: SportCrafters

Model: ROLLER FORK STAND

Type: Quick Instructions

Download PDF

report

SportCrafters ROLLER FORK STAND Quick Instructions

SportCrafters ROLLER FORK STAND Quick Instructions

Other documents