2. ROOMS TO GO
  3. 32320119

ROOMS TO GO 32320119, 32341036, 32351037, 32391031 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the headboard models SH201BGE-1, SH201BLU-1, SH201GRY-1, SH201DGR-1, and SH201PNK-1. The document provides a detailed parts list and clear steps on putting the headboard together, including attaching the legs and bed rails. I'm here to help if you have any questions about the assembly process.
  • What parts are included in the assembly?
    What is the first step in the assembly process?
    What tools are needed for the assembly?
Headboard
Leg
Bolts
M8 x 50mm
Lock Washer
(for M8)
Flat Washer
(for M8)
Bolts
M6 x 50mm
Lock Washer
(for M6)
Allen Key
M4 x 65mm
Allen Key
M5 x 65mm
Hex NutFlat Washer
(for M6)
x4 x4 x4 x4 x4
x1x4x8 x1
ASSEMBLY INSTRUCTION
SH201BGE-1 & SH201BLU-1 & SH201GRY-1 &
SH201DGR-1 & SH201PNK-1
1 2
A B C D E
I
H
G
F
x2
ASSEMBLY INSTRUCTION
SH201BGE-1 & SH201BLU-1 & SH201GRY-1 &
SH201DGR-1 & SH201PNK-1
Begin assembly by attaching each Headboard Leg (2) to the bottom of the Headboard (1) by aligning
the hole and securing with 2 Allen Bolts (A) , 2 Lock Washer (B) , 3 Flat Washer (C) per leg using
Allen Key (I) .
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
I
A
B
C
F
E
G
F
D
H
Attached Bed Rails (not included) to left and right Headboard Legs (2) using 2 Allen bolts (D) and 2 Flat
Washer (F) from the back and 2 Flat Washer (F), 2 Lock Washer (E) and 2 Hex Nuts (G) from the
front. Tighten all bolts with Allen Key (H) provided.
/