Winners Only DBT53078 Assembly Instructions

Brand: Winners Only

Model: DBT53078

Type: Assembly Instructions

Winners Only DBT53078 is a sturdy and reliable table that can be used for various purposes, such as dining, working, or studying. It features a solid top and a sturdy base, ensuring stability and durability. The table is also easy to assemble and disassemble, making it convenient for storage and transportation. Additionally, it has a butterfly design, allowing you to extend the table to accommodate more guests or activities. With its versatile features and ease of use, the Winners Only DBT53078 is an excellent choice for any home or office.

PAGE 1 OF 3 MADE IN MALAYSIA

TBS-20657-UNMWU

DBT53078TB / DPT53078TB

PROD . NO:

WINNERS ONLY

HARDWARE LIST:

Flat Washer

Wrench

Lock Washer

Hex Nut 5/16"

5/16"

M8.5 x 18 x 1.2mm

12.8 mm

8 pcs

4 pcs

1 pce

This product will take 15-20

minutes to assemble.

Screw driver is require for assembly (not included)

TIP:store the Allen key and or Wrench used in assembly

in this product’s drawer or use masking or painter’s tape

to affix it to the underside of the product .this will make it

easier to find if you want to periodically tighten bolts or

disassemble the product.

Table Top

Stretcher

COMPONENT LIST:

SKETCH

DESCRIPTION QTY

1 pce

1pce

Hardware Bag 1pack

NO SKETCHSIZE

DESCRIPTION QTY

Thank you for purchasing this quality product. Please read the instructions thoroughly before unpacking the

assembly parts.

Caution: Sharp exposed staple tips can cause injury, therefore for your protection, please remove

any exposed staples used in packing.

Please keep all hardware parts out of the reach of children.

1.We recommend that you should assemble this product with the assistance of another person: this will make the

assembly easier,and will help to prevent personal injury and to insure parts are not damaged during the

assembly process.

2.Before beginning,please check the packing materials carefully for small parts which may have come loose

inside the carton during shipping. Please do not discard any packing material until all parts have been located.

If any parts are missing, please contact your dealer for prompt replacement.

3.To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residues

and rough surfaces and also check for staples or nails left after removing the packing materials. The manufacturer

will not be held responsible if preventive steps are not taken prior to installation.

4. Please do not over tighten screws or bolts. During normal use everyday,screws,bolts,nuts and wooden plugs

may loosen up. They should be periodically inspected and re-tightened to prevent damage to the furniture

and (or) personal property of cause injury. Always check to be sure all harware on this list and the below

mentioned components are attached to the furniture properly and kept tightened.

5.Please lay all parts and hardware on a non abrasive surface such as a carpet,and follow the assembly.

4JCBB Bolt M8 x 80mm 4 pcs

6Allen Key M5 x 27 x 65mm 1 pce

D Trestle 2 pcs

2 pcs

EEnd Caps

DBT53078TB / DPT53078TB

SOLID TOP B’FLY COUNTER HEIGHT TABLE

TBS-20657-UNMWU

WINNERS ONLY

MADE IN MALAYSIA

Page 2 of 3

DBT53078TB-(B)

DPT53078TB-(B)

DBT53078TB-(D)

DPT53078TB-(D)

DBT53078TB-(C)

DPT53078TB-(C)

ASSEMBLY :

1.1- Step 1.1 Attach the Stretcher to the Trestle using the supply hardware as shown in Fig.1 Add End Caps as

shown in Fig.1

Fig.1

Wood Dowel

STEP 1

Base Assembly

STEP 2

2.1- Place the Table Top upside down on a soft Protective surface such as a carpet. Remove cleats

as shown on Fig 2 .

REMOVE ALL 4 CLEATS

Fig.2

DBT53078TB-(E)

DPT53078TB-(E)

MADE IN MALAYSIA

Page 3 of 3

STEP 4

STEP 3

TBS-20657-UNMWU

CARE INSTRUCTION

~ Be sure to use the same type of polish consistenly.

Your furniture will appear cloudy or streaky if oil

based or wax based polishes are interchanged.

~ Spray your furniture surface evenly. Wipe in a

circular motion with a soft clean cloth.

DBT53078TB / DPT53078TB

SOLID TOP B’FLY COUNTER HEIGHT TABLE

WINNERS ONLY

Assembly is now Completed.

3.1- Attached Table Top to the trestle by using the supply hardware as shown on Fig.3

4.1-Unlock the hook lock from underneath the table top and pull the table from both ends.

4.2-Lift both leaves from the compartment.

4.3-Flip up the aprons and unfold leaf and place the leaf on the Table Top surface carefully.

STEP 6

5.1-Push Table Top from both ends to close.Lock the hooks underneath the table.

Lock Hook

Unlock Hook

Fig.3

Winners Only DBT53078 Assembly Instructions

Winners Only DBT53078 Assembly Instructions

Winners Only DBT53078 Assembly Instructions

Related papers

Other documents