formatted again in Win XP.
SPECIFICATION
Five Memory Slots SD; CF; MS; xD; Micro-SD/M2
Interface to PC USB 3.0
Front Panel I/O USB 3.0 Port x 1(for HRU- 312R3)
Memory card supports Compact Flash Card Series: CF UDMA
6, CF Type I, CF Type II, CF Ul
tra II, Micro Drive, MagicStor, etc
xD Picture Card series: xD, xD M-series,
xD H-series, etc
Secure Digital Card series: SD, SD 3.0
UHS-I, SDXC, SDHC, SD Ultra II, mini
SD, mini SDHC, Micro-SD, Micro-SDHC,
etc
MMC card series: MMC-I, MMC-II, MMC
4.0, MMC Dual Voltage, MMC Mobile,
MMC 4.0 Dual Voltage, RS-MMC, RS-
MMC Dual Voltage, RS-MMC Mobile,
RS-MMC 4.0, RS-MMC 4.0 Dual Volt-
age, MMC Micro(*), etc
Memory Stick card series: MS, M2 ,MS
PRO-HG Duo, MS HG Micro, MS Select,
MS ROM, MS PRO, MS Magic Gate,
MS PRO Magic Gate, MS-Duo Magic
Gate, MS PRO Duo , MS micro, etc
(*): accepted by card adapter
Indicator Green LED: Power(holding on light) &
Access(ash)
Power Input USB Bus Power
System Environment Operating Temperature: 5°C ~ 40°C
Operating Humidity: 20%RH ~ 50%RH
Certification FCC Class B, CE
System Support Win XP, Win Vista 32/64, Win 7 32/64
Linux Kernel ( USB2.0 only )
* The SH-ICR3USB3 with one USB 3.0 passes through port.
* Win XP does not support Exfat format.
* Specifications are subject to change without notice.
ICON PROGRAM INSTALLATION
After you install the external card reader to your PC, install
the Shintaro USB 3.0 Card Reader Icon Program.
Windows XP/VISTA/7
Insert the program disc into the CD-ROM/ 1.
DVD-ROM drive.
Click the folder “IconMan_R_V1.20_(xD)”.2.
Click the le “IconMan_R_V1.20_(xD)”.3.
Click “OK” to complete the installation.4.
Quick Guide
Shintaro Blazer USB3.0 Internal Card Reader