Kodak W1020 User manual

Brand: Kodak

Model: W1020

Category: Digital photo frames

Type: User manual

KODAK EASYSHARE

W820/W1020 Wireless

Digital Frames

Extended user guide

www.kodak.com

For help with your digital frame, www.kodak.com/go/digitalframesupport

Eastman Kodak Company

Rochester, New York 14650

All screen images are simulated.

Kodak and EasyShare are trademarks of Eastman Kodak Company.

Eastman Kodak Company is an authorized licensee of the CompactFlash trademark.

P/N 4H5172_en

Product features

www.kodak.com/go/support

Front View

Back/Right View

1 LCD screen

2 Touch border (tap/slide)

3 Touch border (tap only)

4 Lights

5 Raised guide

To use the touch border,

see page 3.

NOTE: When screen icons appear,

lights turn on at touch-sensitive

points near the raised guide.

1 Audio In

2 Audio Out

3 DC-In (12V)

4 Speakers (2)

ii www.kodak.com/go/support

Back/Side View

1 Power button 5 Volume button

2 Wall mounting holes 6 Memory card slot - CF, MD

3 Rotating/extending stand (see page 1) 7 USB connector (to camera/USB device)

4 Memory card slot - SD/SDHC, MMC,

MS, xD

8 USB connector (to computer)

www.kodak.com/go/support iii

Table of contents 1

1 Getting started ......................................................................................1

Setting up your frame.................................................................................... 1

Turning on/off your frame..............................................................................2

Using your frame’s Quick Touch Borders ........................................................ 3

Setting your language ...................................................................................4

Connecting to your wireless network ............................................................. 4

2 Setting up for wireless operation ..........................................................5

Connecting to your wireless network ............................................................. 5

Installing the software: WINDOWS OS only....................................................9

Verifying computer/device connections ........................................................10

3 Setting up Web content .......................................................................12

Setting up access to the Gallery and Web media .......................................... 12

Connecting to your Gallery account .............................................................16

Connecting to your FLICKR account .............................................................17

Connecting to your FRAMECHANNEL account .............................................18

Adding Web feeds.......................................................................................19

Creating shortcuts on your frame................................................................. 25

Previewing, editing, and deleting feeds........................................................ 26

4 Viewing on your frame ........................................................................28

Enjoying your pictures immediately! ............................................................ 28

Inserting a memory card..............................................................................28

Connecting a digital camera or other USB device ......................................... 29

Viewing the Home screen............................................................................ 30

Accessing your pictures and videos.............................................................. 32

Viewing pictures and videos ........................................................................33

Playing a slide show....................................................................................35

Arranging pictures to play by date or filename .............................................36

5 Doing more with your frame ...............................................................37

iv www.kodak.com/go/support

Table of contents

Playing music ..............................................................................................37

Playing a video............................................................................................38

Printing pictures..........................................................................................39

Copying on your frame................................................................................ 41

Deleting pictures .........................................................................................42

Selecting multiple pictures...........................................................................43

6 Using wireless mode ...........................................................................44

What are the wireless features of my frame? ...............................................44

Setting up your frame for wireless operation ................................................44

Wireless networking and the Internet .......................................................... 44

Viewing pictures/videos wirelessly ...............................................................45

Viewing Gallery/Web media content on your frame......................................46

Automatically receiving My Friends Albums..................................................49

Emailing pictures and videos from your frame .............................................. 51

Copying wirelessly to/from your computer.................................................... 53

7 Changing settings and more ...............................................................57

Changing frame settings ............................................................................. 57

Settings menus ........................................................................................... 57

Setting the clock and timer..........................................................................60

Upgrading your software and firmware........................................................62

Adding a matte and faceplate ..................................................................... 64

Mounting your frame on the wall ................................................................ 64

Changing your frame orientation ................................................................. 65

Maintaining your frame and mattes .............................................................66

Learning more about your frame.................................................................. 66

8 Troubleshooting and support ..............................................................67

Frequently asked questions .........................................................................67

Picture frame problems ...............................................................................68

Picture frame/computer communications ..................................................... 70

Screen messages......................................................................................... 71

Table of contents

www.kodak.com/go/support

9 Appendix .............................................................................................73

Digital frame specifications..........................................................................73

Important safety instructions .......................................................................75

Additional care and maintenance ................................................................76

Limited warranty ......................................................................................... 76

Regulatory compliance ................................................................................ 78

1 www.kodak.com/go/support

1 Getting started

Welcome to your KODAK EASYSHARE W820/W1020 Wireless Digital Frame. Viewing

your pictures couldn’t be simpler!

Setting up your frame

Setting up the stand

Your frame displays pictures in landscape orientation. To change to portrait

orientation, see page 65.

Stand (pull to adjust the frame angle for best viewing)

When displayed with the

stand extended, the frame

rests at a 68-90

° angle.

Getting started

www.kodak.com/go/support

Attaching the power cable

CAUTION:

Do not use this power cable with other devices, including digital

cameras.

Turning on/off your frame

Your power cable may look different from

the one pictured. Use the plug that

accommodates your type of power outlet.

Power button - press and hold (

or about 2 seconds), then release.

With the power cable still

plugged in, your frame

retains information (like the

time) if you turn it off.

3 www.kodak.com/go/support

Getting started

Using your frame’s Quick Touch Borders

IMPORTANT:

The display screen is not touch-sensitive. Do not touch it. Lights appear on

the borders (upper right and bottom) to show you where to touch.

CAUTION:

Only use your finger to touch the borders. Using sharp or metal

objects may damage the border or screen.

Done or

Tap the light

closest to an icon*

to select it.

Touch tips

Home

Play slide show

Quick Touch

Tap and slide on the Quick

Touch Borders* only.

Tap lights

below icons

Slide on

bottom border

only

Slide to highlight

menus, pictures,

videos, options.**

Tap OK to select

them.

Slide to scroll:

Scroll through images—Like turning the pages of a book, slide left ← to go forward, slide right → to go back. For

faster scrolling through larger numbers of pictures, touch and hold (3 seconds), then slide to the end of the border.

Scroll through menus—Slide right → to scroll down, slide left ← to scroll up.

Borders

** Tap below small arrows at the ends of the scroll bar to move the highlight one picture, menu, or item at a time.

Tap lights next to

icons

Don’t hover,

borders can be

sensitive.

(No sliding here)

Tap a border to

display the icons.

Tap Close to

dismiss them.

Choose OK or

* Icons change color when they are selected.

Getting started

www.kodak.com/go/support

Setting your language

The language screen appears the first time you turn on your frame.

■ Slide (or tap below slider arrows) on the lights at

the bottom border to highlight your language, then

tap Save.

NOTE: Slide left/right on the lights to move up or down the list.

To change the language at a later time:

■ Tap (Home) → (Settings) → Language.

The language screen appears.

Slide to highlight your language, then tap Save.

To use the Quick Touch Borders, see page 3.

Connecting to your wireless network

After you set your language, your frame scans for available wireless networks. See

Connecting to your wireless network, page 5.

Slider arrows

Save

5 www.kodak.com/go/support

2 Setting up for wireless

operation

If you have problems with your wireless setup or connection, see

Troubleshooting starting on page 67. Or open EASYSHARE Digital Display Software

on your computer (see page 9) and click Tools

→ Wireless Troubleshooter. Follow the

automated troubleshooting wizard.

Connecting to your wireless network

To allow your frame to access the contents of your computer wirelessly, connect your

frame to your wireless home network.

NOTE: If you are not sure you have a wireless network, ask the person who set up your computer.

1 First time—If this is the first time you turned on your frame, tap the light next to

Save after you set your language (see page 4).

The Scanning for available wireless networks screen appears.

Setting up for wireless operation

www.kodak.com/go/support

Available wireless networks are listed.

You can slide to highlight Exit without connecting, then tap OK (or tap Back) to

dismiss the screen and go to the Home screen (see page 30).

If you want to connect to your wireless home network later and start enjoying your

pictures now, insert a memory card. Or, connect a camera or other USB device with

pictures (see page 29).

Later—To connect to your wireless home network later:

a. Tap Home

→ Settings .

b. Slide to highlight Network, then tap Select.

c. Highlight Scan for wireless networks, then tap OK.

d. Follow the screen prompts and continue with step 2 below.

NOTE:

If the scan finds multiple networks,

your home network (with the highest

% signal strength) is usually listed

first and highlighted. Tap OK.

Or, to select another network, slide or

tap below the arrows to highlight a

network, then tap OK.

Slider arrows

Slider

7 www.kodak.com/go/support

Setting up for wireless operation

If your wireless network is not found:

a. Slide to highlight My network not shown, then select OK.

b. Check that your router is on and your frame is close to the router, then select

Scan again.

If your wireless network is still not found, your network does not broadcast SSIDs.

You then need to enter your network SSID (sometimes called the network name)

manually:

a. Select Enter SSID, then tap OK.

The on-screen keyboard appears.

b. Using the on-screen keyboard, enter the SSID in the text box, (see page 7). Tap

Done when finished.

The person who set up your network can help you with this information. Or, tap

Back then tap Help me connect for more information.

2 With your home network highlighted, tap OK to connect to your home network.

The Connecting (or the wireless network security screen, if enabled) appears.

Or, tap Exit to go to the Home screen without connecting. (See page 30.)

Enter security key (if you have wireless network security enabled)

You are prompted to enter your security key (WEP or WPA) using the on-screen

keyboard. Slide along the bottom of the touch border (or tap below the slider

arrows) to highlight a character, then tap (Select) to enter it in the text box.

Tap Done when you are finished entering all the characters.

Setting up for wireless operation

www.kodak.com/go/support

If you do not have security enabled, go to step 3. (We recommend that you

enable your network security to prevent others from accessing your wireless home

network.)

NOTE: The screen identifies your security as either

WEP

WPA

WEP

security key can be either:

5 or 13 characters (0-9, A-Z, some special characters, case sensitive)

10 or 26 characters (0-9, A-F, not case sensitive).

WPA

key is 8-63 characters, case sensitive.

The person who set up your network can provide you with this information.

Congratulations! You have successfully connected your frame to your wireless network!

3 If you haven’t done so already, install the KODAK EASYSHARE Digital Display

Software on your WINDOWS OS computer (see page 9) so you can set up and

customize your frame right from your computer wirelessly. For MAC OS users, see

page 15.

4 Tap OK when you are done installing the software.

Done

Select

Text box

Slider

Slider arrows

Backspace - erases text

On the bottom border, keep

sliding (or tapping slider

arrows) left/right to go to the

previous or next row.

Touch tips

Right border - tap only

9 www.kodak.com/go/support

Setting up for wireless operation

Installing the software: WINDOWS OS only

IMPORTANT:

For MAC OS users, do not install the software on your computer. See

page 15 to open your frame’s Device Settings page in your browser to start

setting access to Web content and customizing your frame.

The CD that was packaged with your frame contains two applications that work well

independently, but also work together for the best experience with your frame:

■ KODAK EASYSHARE Digital Display Software —manage your frame right

from your computer, copy between your frame and computer (see page 53), and

set up your frame for access to KODAK Gallery and Web content (see page 12).

■ KODAK EASYSHARE Software —organize, edit, and share your pictures.

IMPORTANT:

We recommend that you install both. If you already have EASYSHARE

Software on your computer, upgrade to this special version for additional

features.

1 Insert the CD into your computer, then follow the

on-screen instructions to install the software.

■ Click Typical to install EASYSHARE Digital

Display Software and to update a previous

version of EASYSHARE Software.

■ If you do not have a previous version of

EASYSHARE Software on your computer, you

can click Custom and choose both applications

for a new installation.

The software icons appear on your desktop when the

installation is complete.

2 Double-click to open EASYSHARE Digital

Display Software if it doesn’t open automatically.

When prompted, take a few minutes to electronically register your frame and software

for exclusive tips and offers. To register later, visit www.kodak.com/go/register.

CD packaged

with your frame.

Setting up for wireless operation

www.kodak.com/go/support

Verifying computer/device connections

Scanning to verify your wireless network connection gives your frame access to

content on your devices wirelessly.

After installing the software (see page 9), return to your frame then:

1 Tap OK.

The network connection setup screen appears.

If you forgot to install the software, tap Back then install the software (see

page 9). When you are done installing the software on your computer, tap OK on

your frame, then continue with step 2.

2 Tap Scan now to verify your computer connection.

The Scanning screen appears as the frame scans your network and then lists available

computers and other picture sources that your frame can access wirelessly.

You can select Scan later if you want to verify your connections later.

To verify your connections later, tap Home → Settings → Network

→ Verify computer connection.

Scan now

Scan later

11 www.kodak.com/go/support

Setting up for wireless operation

3 If your computer is listed, your wireless connection is successful. Tap Done to close

the window.

If your computer is not listed, tap Scan again or tap Help for options.

You have completed the frame setup. Your frame can now access your host computer,

wirelessly. Your computer appears as a picture source icon on your frame’s Home

screen (see page 30).

4 Tap (Home) to start viewing your pictures.

NOTE: If you have more than one frame or device on your wireless network, give them unique names using

the on-screen keyboard so you can tell them apart. Go to Home

→

Settings

→

Device

configuration menu, (see page 59).

Help

Done

Scan again

Exit

www.kodak.com/go/support 12

3 Setting up Web content

Setting up access to the Gallery and Web media

IMPORTANT:

For Mac OS users, do not load the EASYSHARE Digital Display Software on

your computer. See page 15 to open your frame’s Device Settings page in

your browser to start setting access to Web content and customizing your

frame from your computer.

On your computer, use KODAK EASYSHARE Digital Display Software (see page 12) to

set up access to the KODAK Gallery and RSS (Really Simple Syndication) feeds such as

publicly posted images, news, weather, sports, finance, etc. Or, use the Settings option

to customize your frame right from your computer.

WINDOWS OS users

1 Make sure your frame and computer are connected to your wireless network (see

page 5) and your computer is connected to the Internet.

2 Click on your desktop to open EASYSHARE Digital Display Software.

3 Select Enable media sharing to allow your frame to access pictures on your

computer, then click Next.

4 Select Yes, set up Web media to access Web content such as KODAK Gallery,

FLICKR, and FRAMECHANNEL, then click Next.

5 Click Device Settings next to the frame icon in the Drag and Drop Zone.

Your frame’s Device Settings page opens in your browser.

13 www.kodak.com/go/support

Setting up Web content

6 From the drop-down menu, select your frame.

7 Click the following Web Media pages for setup instructions to easily access

content right on your frame:

■ KODAK Gallery—connect to your existing Gallery account or set up a new one

to receive pictures from other Gallery friends and family. See page 16.

■ FLICKR—sign in to your existing FLICKR account or set up a new one (see

page 17) so you can receive and view FLICKR photos on your frame.

■ FRAMECHANNEL—add to your list of RSS photo feeds from FRAMECHANNEL

(see page 21) and receive photos from your favorite photo-sharing sites.

Connect to your existing FRAMECHANNEL account or set up a new one (see

page 21) so you can customize content such as news, weather, traffic, sports

scores, finance, and much more.

■ Photo RSS—add to your list of RSS photo feeds from FLICKR and other

favorite photo-sharing sites (see page 19).

■ Create shortcuts—create up to 5 shortcuts of your favorite photo feeds (see

page 25).

■ Settings—customize your frame with general settings, display settings, and

clock and timer settings right from your computer. (For more details about the

settings, see Changing settings and more, page 57.)

Page is loading ...

Kodak W1020 User manual

Brand: Kodak

Model: W1020

Category: Digital photo frames

Type: User manual

Download PDF

report

Kodak W1020 User manual

Kodak W1020 User manual

Related papers

Other documents