Asus 90LMB5101T010OUL User manual

Brand: Asus

Model: 90LMB5101T010OUL

Category: TVs & monitors

Type: User manual

This manual is also suitable for

VE278 Series

LCD Monitor

User Guide

April 2012

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

Table of contents

Notices ......................................................................................................... iii

Safety information ...................................................................................... iv

Care & Cleaning ........................................................................................... v

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents ......................................................................... 1-1

1.3 Assembling the monitor base ..................................................... 1-2

1.4 Connect cables ............................................................................. 1-2

1.5 Monitor introduction .................................................................... 1-3

1.5.1 Front of the LCD monitor ................................................ 1-3

1.5.2 Rear of the LCD monitor ................................................. 1-5

1.5.3 QuickFit Function ............................................................ 1-6

2.1 Detaching the arm/stand

(for VESA wall mount) ..............................................................2-1

2.2 Adjusting the monitor .................................................................. 2-2

3.1 OSD (On-Screen Display) menu ................................................. 3-1

3.1.1 How to reconfigure .......................................................... 3-1

3.1.2 OSD Function Introduction .............................................. 3-1

3.2 Specications ............................................................................... 3-6

3.3 Troubleshooting (FAQ) ................................................................ 3-7

3.4 Supported Timing List ................................................................. 3-8

iii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

• Thisdevicemaynotcauseharmfulinterference,and

• Thisdevicemustacceptanyinterferencereceivedincluding

interferencethatmaycauseundesiredoperation.

Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfora

ClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimits

are designed to provide reasonable protection against harmful interference

inaresidentialinstallation.Thisequipmentgenerates,usesandcan

radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance

withmanufacturer’sinstructions,maycauseharmfulinterferencetoradio

communications.However,thereisnoguaranteethatinterferencewill

not occur in a particular installation. If this equipment does cause harmful

interferencetoradioortelevisionreception,whichcanbedeterminedby

turningtheequipmentoffandon,theuserisencouragedtotrytocorrect

theinterferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmenttoanoutletonacircuitdifferentfromthatto

which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

AsanEnergyStar

Partner,ourcompanyhasdeterminedthatthis

productmeetstheEnergyStar

guidelinesforenergyefficiency.

Canadian Department of Communications Statement

ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradio

noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

Safety information

• Beforesettingupthemonitor,carefullyreadallthedocumentationthat

came with the package.

• Topreventfireorshockhazard,neverexposethemonitortorainor

moisture.

• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltages

insidethemonitormayresultinseriousphysicalinjury.

• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contacta

qualifiedservicetechnicianoryourretailer.

• Beforeusingtheproduct,makesureallcablesarecorrectlyconnected

andthepowercablesarenotdamaged.Ifyoudetectanydamage,

contactyourdealerimmediately.

• Slotsandopeningsonthebackortopofthecabinetareprovidedfor

ventilation.Donotblocktheseslots.Neverplacethisproductnearor

over a radiator or heat source unless proper ventilation is provided.

• Themonitorshouldbeoperatedonlyfromthetypeofpowersource

indicatedonthelabel.Ifyouarenotsureofthetypeofpowersupplyto

yourhome,consultyourdealerorlocalpowercompany.

• Usetheappropriatepowerplugwhichcomplieswithyourlocalpower

standard.

• Donotoverloadpowerstripsandextentioncords.Overloadingcan

result in fire or electric shock.

• Avoiddust,humidity,andtemperatureextremes.Donotplacethe

monitorinanyareawhereitmaybecomewet.Placethemonitorona

stable surface.

• Unplugtheunitduringalightningstormorifitwillnotbeusedfora

long period of time. This will protect the monitor from damage due to

power surges.

• Neverpushobjectsorspillliquidofanykindintotheslotsonthe

monitor cabinet.

• Toensuresatisfactoryoperation,usethemonitoronlywithULlisted

computers which have appropriate configured receptacles marked

between100-240VAC.

• Ifyouencountertechnicalproblemswiththemonitor,contacta

qualifiedservicetechnicianoryourretailer.

Care & Cleaning

• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables

and power cord. Follow the correct lifting techniques when positioning the

monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.

Donotliftthedisplaybythestandorthecord.

• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitor

surfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemoved

with a cloth dampened with mild cleaner.

• Avoidusingacleanercontainingalcoholoracetone.Useacleanerintended

forusewiththeLCD.Neverspraycleanerdirectlyonthescreen,asitmaydrip

inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent

light. Turn off the Power Switch and turn it on again to make sure that the

flicker disappears.

• Youmayfindslightlyunevenbrightnessonthescreendependingonthe

desktoppatternyouuse.

• Whenthesameimageisdisplayedforhours,anafterimageoftheprevious

screenmayremainafterswitchingtheimage.Thescreenwillrecoverslowlyor

youcanturnoffthePowerSwitchforhours.

• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contact

yourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!

Conventions used in this guide

WARNING:Informationtopreventinjurytoyourselfwhentryingto

complete a task.

CAUTION:Informationtopreventdamagetothecomponentswhen

tryingtocompleteatask.

IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.

NOTE:Tipsandadditionalinformationtoaidincompletingatask.

Wheretondmoreinformation

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

TheASUSwebsitesworldwideprovideupdatedinformationonASUS

hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Yourproductpackagemayincludeoptionaldocumentationthatmayhave

beenaddedbyyourdealer.Thesedocumentsarenotpartofthestandard

package.

1-1ASUSLCDMonitorVE278Series

1.1 Welcome!

ThankyouforpurchasingtheASUS

VE278SeriesLCDmonitor!

ThelatestwidescreenLCDmonitorfromASUSprovidesacrisper,broader,and

brighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.

Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisual

experiencethattheVE278Seriesbringsyou!

1.2 Package contents

CheckyourVE278SeriesLCDpackageforthefollowingitems:

LCD monitor

Monitor base

Quick start guide

warrantycard

1xPowercord

1xVGAcable

1xDVIcable(onlyforVE278N)

1xHDMI-DVIcable(onlyforVE278H)

1xAudiocable(onlyforVE278H)

Ifanyoftheaboveitemsisdamagedormissing,contactyourretailer

immediately.

1-2 Chapter 1: Product Introduction

1.3 Assembling the monitor base

To assemble the monitor base:

1. Attachthebasetothearmandfixwiththescrewtojointhemtightly.Youcan

easilytightenthescrewbyfingers.

2. Adjustthemonitortotheanglethatismostcomfortableforyou.

Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent

damage to the monitor.

Make sure to screw the base to the arm tightly.

1.4 Connect cables

To connect cables:

Connectthecablesyouneedbasedonchapter1.5.2,page1-5.

1-3ASUSLCDMonitorVE278Series

1.5 Monitor introduction

1.5.1 Front of the LCD monitor

VE278H

VE278N

6 7

3 5

6 7

4 5

1. Button:

• Automaticallyadjusttheimagetoitsoptimizedposition,clock,and

phasebylongpressingthisbuttonfor2-4seconds(forVGAmodeonly).

• Usethishotkeytoswitchfromsixvideopresetmodes(SceneryMode,

StandardMode,TheaterMode,GameMode,NightViewMode,and

sRGBMode)withSPLENDID™VideoIntelligenceTechnology.

• ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenu

is active.

2. QuickFit Button:

• ThisisahotkeytoactivatetheQuickFitfunctiondesignedforalignment.

• TheQuickFitfunctioncontains7pagesofcommongridpatterns,paper

sizes,andphotosizes.

3. Button:

• Press this button to decrease the value of the function selected or move

tothenextfunction.ThisisalsoahotkeyforContrastadjustment.

1-4 Chapter 1: Product Introduction

4. Button:

• Press this button to decrease the value of the function selected or move

tothenextfunction.ThisisalsoahotkeyforVolumeadjustment.

5. MENUButton:

• Press this button to enter the OSD menu.

• Pressthisbuttontoenter/selecttheicon(function)highlightedwhilethe

OSD is activated.

6. Button:

• Press this button to increase the value of the function selected or move

to the previous functions.

• ThisisalsoahotkeyforBrightnessadjustment.

7. Input Select Button:

• UsethishotkeytoswitchfromVGA,DVI(VE278N),HDMI(VE278H)input

signal.

8. PowerButton/PowerIndicator:

• Pressthisbuttontoturnthemonitoron/off.

• The color definition of the power indicator is as the below table.

Status Description

Blue ON

Amber Standbymode

OFF OFF

1-5ASUSLCDMonitorVE278Series

1.5.2 Rear of the LCD monitor

VE278N

VE278H

5 6

1 AC-IN port

2 HDMI port

3 DVI port

4 VGA port

5 Audio - in Port

6 Earphone - out Port

7 Screw Holes for VESA Wall Mount

1-6 Chapter 1: Product Introduction

1.5.3 QuickFit Function

TheQuickFitfunctioncontainsthreepatterns:(1)Grid(2)Papersize(3)Photo

size.

1. Gridpatterns

Thegridpatternsfacilitatedesignersanduserstoorganizecontentandlayoutona

page and achieve a consistent look and feel.

AlignmentGrid

2. Papersize

QuickFitprovidesnumerouscommonlyusedstandardpapersizesforusersto

viewtheirdocumentsinrealsizeonthescreen.

Letter

1-7ASUSLCDMonitorVE278Series

3. Photosize

ThevariousrealphotosizesdisplayedintheQuickFitfunctionprovides

photographersandotheruserstoaccuratelyviewandedittheirphotosinrealsize

on the screen.

Photo4x6,3x5,2x2

Photo8x10,5x7

2-1 Chapter 2: Setup

2.1 Detaching the arm/stand

(for VESA wall mount)

ThedetachablestandoftheVE278SeriesLCDmonitorisspeciallydesignedfor

VESAwallmount.

To detach the arm/stand:

1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor

face down on a clean table.

2. Useascrewdrivertoremovethe two screws that secure the stand to the

monitor.

3. Detach the stand from the monitor.

• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent

damage to the monitor.

• Holdthestandofthemonitorwhileremovingthescrews.

• TheVESAwallmountkit(100x100mm)ispurchasedseparately.

• UseonlytheULListedWallMountBracketwithminimumweight/load

24.4kg(Screwsize:4x10mm).

2-2ASUSLCDMonitorVE278Series

2.2 Adjusting the monitor

• Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe

monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.

• Hold the stand to prevent the monitor from falling while changing its angle.

• Youcanadjustthemonitor’sanglefrom-5˚to20˚.

-5 ~ 20

3-1 Chapter3:GeneralInstruction

3.1 OSD (On-Screen Display) menu

3.1.1 Howtorecongure

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

1. PresstheMENUbuttontoactivatetheOSDmenu.

2. Press



and



to navigate through the functions. Highlight and activate

thedesiredfunctionbypressingtheMENUbutton.Ifthefunctionselected

hasasub-menu,press



and



again to navigate through the sub-menu

functions.Highlightandactivatethedesiredsub-menufunctionbypressing

theMENUbutton.

3. Press



and



to change the settings of the selected function.

4. ToexittheOSDmenu,pressthe button. Repeat step 2 and step 3

toadjustanyotherfunction.

3.1.2 OSD Function Introduction

1. Splendid

Thisfunctioncontainssixsub-functionsthatyoucanselectforyour

preference.EachmodehastheResetselection,allowingyoutomaintain

yoursettingorreturntothepresetmode.

3-2ASUSLCDMonitorVE278Series

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

• Scenery Mode

:Thisisthebestchoiceforsceneryphotodisplayingwith

SPLENDID™VideoIntelligenceTechnology.

• Standard Mode

: This is the best choice for document editing with

SPLENDID™VideoIntelligenceTechnology.

• Theater Mode

: This is the best choice for movie watching with

SPLENDID™VideoIntelligenceTechnology.

• Game Mode

:ThisisthebestchoiceforgameplayingwithSPLENDID™

VideoIntelligenceTechnology.

• Night View Mode

:Thisisthebestchoiceforplayingdark-scenegame

orwatchingdark-scenemoviewithSPLENDID™VideoIntelligence

Technology.

• sRGB

: This is the best choice for viewing photos and graphics from PCs.

IntheStandardMode,theSaturation,SkinTone,Sharpness,andASCR

functions are not user-configurable.

InthesRGB,theSaturation,ColorTemp.,SkinTone,Sharpness,Brightness,

Contrast and ASCR functions are not user-configurable.

2. Color

Selecttheimagecoloryoulikefromthisfunction.

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Brightness

Contrast

Saturation

Color Temp.

User Mode

Natural

OFF

Skin Tone

Smart View

• Brightness: The adjusting range is from 0 to 100. The button is

alsoahotkeytoactivatethisfunction.

3-3 Chapter3:GeneralInstruction

• Contrast: The adjusting range is from 0 to 100. The button(Only

forVE278N)isalsoahotkeytoactivatethisfunction.

• Saturation: The adjusting range is from 0 to 100.

• Color Temp.

:Containsthreepresetcolormodes(Cool,Normal,Warm)

andoneUserMode.

• Skin Tone

:ContainsthreecolormodesincludingReddish,Natural,and

Yellowish.

• Smart view

:TheversatileviewingpositionswithSmartViewTechnology

IntheUserMode,colorsofR(Red),G(Green),andB(Blue)are

userconfigurable; the adjusting range is from 0 ~ 100.

3. Image

YoucanadjusttheimageSharpness,TraceFree(OnlyforVE278H),Aspect

Control,ASCR,Position(VGAonly),andFocus(VGAonly)fromthismain

function.

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Focus

Sharpness

Trace Free

ASCR

Position

OFF

Aspect Control Full

• Sharpness: Adjusts the picture sharpness. The adjusting range is from 0

to 100.

• Trace Free: SpeedsuptheresponsetimebyOverDrivetechnology.The

adjustingrangeisfromlower0tofaster100.(OnlyforVE278H)

• Aspect Control:Adjuststheaspectratioto“Full”,“4:3”,“Overscan”.

(OverscanisavailableonlyforVE278HHDMIsource)

• ASCR:SelectONorOFFtoenableordisabledynamiccontrastratio

function.

• Position:Adjuststhehorizontalposition(H-Position)andthevertical

position(V-Position)oftheimage.Theadjustingrangeisfrom0to100

(OnlyavailableforVGAinput).

3-4ASUSLCDMonitorVE278Series

• Focus:ReducesHorizonal-linenoiseandVertical-linenoiseoftheimage

byadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom

0to100(OnlyavailableforVGAinput).

Phaseadjuststhephaseofthepixelclocksignal.Withawrongphase

adjustment,thescreenshowshorizontaldisturbances.

Clock(pixelfrequency)controlsthenumberofpixelsscannedbyonehorizontal

sweep.Ifthefrequencyisnotcorrect,thescreenshowsverticalstripesandthe

image is not proportional.

4. Input Select

Select the input source from

VGA

,

DVI

.(VE278N)

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

VGA

DVI

Select the input source from

VGA

,

HDMI1,HDMI2

.(VE278H)

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

VGA

HDMI1

HDMI2

3-5 Chapter3:GeneralInstruction

5. System Setup

Adjuststhesystemconfiguration.

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Splendid Demo Mode OFF

Language

Information

OFF

English

1/2

Volume

ECO Mode

OSD Setup

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

2/2

VS239

All Reset

• Splendid Demo Mode

: Activate the demo mode for the Splendid

function.

• Volume:

Adjust the earphone or speaker output volume level. The

adjustingrangeisfrom0to100.(OnlyforVE278H.)

• ECO Mode:Activatetheecologymodeforpowersaving.

• OSD Setup:Adjuststhehorizontalpostition(H-Position),verticalposition

(V-Position),OSDTimeout,DDD/CI,andTransparencyoftheOSD

screen.

• Language:SelectOSDlanguage.TheselectionsforNon-EUandNon-

USversionOSDare:English,TraditionalChinese,SimplifiedChinese,

Japanese,Persian,ThaiandIndonesian;TheselectionsforEUand

USversionOSDare:English,German,Italian,French,Dutch,Spanish,

Russian,Poland,Turkey,Portugal,Czech,Croatia,Hungary,Romania

• Information:Displaysthemonitorinformation.

• All Reset

:Selects“Yes”torevertallsettingstothefactorydefaultmode.

Page is loading ...

Asus 90LMB5101T010OUL User manual

Brand: Asus

Model: 90LMB5101T010OUL

Category: TVs & monitors

Type: User manual

This manual is also suitable for

Download PDF

report

Asus 90LMB5101T010OUL User manual

This manual is also suitable for

Asus 90LMB5101T010OUL User manual

Related papers

Other documents