ADJ Galaxian Royale User manual

Brand: ADJ

Model: Galaxian Royale

Category: DJ controllers

Type: User manual

This manual is also suitable for

Micro Royal Galaxian

User Instructions

©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 2

Unpacking: Thank you for purchasing the Micro Royal Galaxian

by American DJ®. Every Micro Royal Galaxian has been thoroughly

tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during

shipping. If the carton appears to be damaged, carefully inspect your

xture for any damage and be sure all equipment necessary to oper-

ate the unit has arrived intact. In the event damage has been found

or parts are missing, please contact our toll free customer support

number for further instructions. Please do not return this unit to your

dealer without contacting customer support rst.

Introduction: The Micro Royal Galaxian is a unique mini laser that

projects red and blue “web type” patterns. These laser patterns may

be projected on a wall, ceiling, or dance floor. The Micro Royal Galax-

ian is a stand alone fixture with 2 operating modes; sound active and

auto. The Micro Royal Galaxian’s compact, light weight case design

make it ideal for mobile entertainers, bands, night clubs and bars. For

best results use fog or special effects smoke to enhance the beams

projections.

Customer Support: American DJ® provides a toll free customer

support line, to provide set up help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.americandj.com for any com-

ments or suggestions. For service related issue please contact Ameri-

can DJ®. Service Hours are Monday through Friday 8:00 a.m. to 4:30

p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

Micro Royal Galaxian General Introduction

Rev. 2/12

©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 4©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 3

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Micro Royal Galaxian General Instructions Micro Royal Galaxian Safety Precautions

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 10 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

• 350mW Blue Laser

• 80mW Red Laser

• 2 Operating Modes - Sound Active Mode & Auto Mode

• RF Wireless Remote Control (Included)

• Dual Hanging Bracket

Micro Royal Galaxian Features

Micro Royal Galaxian Warranty Registration

The Micro Royal Galaxian carries a 90 day limited warranty. Please

fill out the enclosed warranty card to validate your purchase. All

returned service items whether under warranty or not, must be freight

pre-paid and accompany a return authorization (R.A.) number. If the

unit is under warranty you must provide a copy of your proof of pur-

chase invoice. Please contact American DJ® customer support for a

R.A. number.

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 5

©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 6

Micro Royal Galaxian Laser Warnings and Safety

NON-INTERLOCKED HOUSING WARNING

The Micro Royal Galaxian contains high power laser devices inter-

nally. Do not open the laser housing, due to the potential exposure

to unsafe levels of laser radiation. The laser power levels, if the unit is

opened, can cause instant blindness, skin burns and res.

STOP AND READ ALL LASER SAFETY DATA

OPERATION INSTRUCTIONS AND LASER SAFETY

The light source emitted from this product can potentially cause eye

injury if not set up and used properly. The light source emitted from a

laser is very dierent from any other light sources with which you may

be aware of. Laser light is thousands of times more concentrated

than any light from any other kind of light source. This concentration

of light can cause instant eye injuries, primarily by burning the retina

(the back of your eyeball contatining cells that are sensitive to light).

Even if you cannot feel “heat” from a laser beam, it can still poten-

tially injure or blind you or your audience. Even very small amounts

of laser beam light are potentially hazardous even at long distances.

Laser eye injuries can be sustained faster than you can blink.

Do not think that because this laser splits the laser beam into hun-

dreds of beams and that the laser beam is scanned out in high

speed, that an individual laser beam is safe for eye exposure. This

laser uses dozens of milliwatts of laser power (Class 3B levels inter-

nally) before it splits into multiple beams (Class 3R levels). Many of

the individual beams are potentially hazardous to the eyes.

Do not that because the laser light is moving, it is safe. This is not

true. Nor, do the laser beams always move. Since eye injuries can

occur instantly, it is critical to prevent even the smallest possibility of

any direct eye exposure. In the laser safety regulation, it is not legal

to aim Class 3R lasers in areas which people can get exposed. This

is true even if it is aimed below people’s faces, such as on a dance

oor.

Do not operate the laser without rst reading and understanding

all safety and technical data in this manual.

Always set up and install all laser eects so that all laser light is at

least 3 meters (9.8 feet) above the oor on which people can stand.

After setting up, and before public use, test laser to ensure proper

function. Do not use if any defect is detected. Do not use if laser

emits only one or two laser beams rather than dozens/hundreds, as

this could indicate damage to the diraction grating optic, and could

allow emission of higher laser levels above Class 3R.

Do not point lasers at people or animals. Never look into the laser

aperture or laser beams.

Do not point lasers in areas in which people can potentially get

exposed, such as uncontrolled balconies, etc.

Do not point lasers at highly reective surfaces, such as windows,

mirrors and shiny metal. Even laser reections can be hazardous.

Never point a laser at aircraft, this is a federal oense.

Never point un-terminated laser beams into the sky.

Do not expose the output optic (aperture) to cleaning chemicals.

Do not use laser if the laser appears to be emitting only one or two

beams.

Do not use the laser if the housing is damaged, the housing is open,

or if the optics appear damaged in any way.

Never open the laser housing. The high laser power levels inside of

the protective housing can start res, burn skin and will cause instant

eye injury.

Never leave this device running unattended.

The operation of a class 3R laser show is only allowed if the show

is controlled by a skilled and well- trained operator, familiar with the

data included in this manual.

The legal requirements for using laser entertainment products vary

from country to country. The user is responsible for the legal require-

ments at the location/country of use.

Always use proper lighting safety cables when hanging lights and

eects overhead.

Micro Royal Galaxian Laser Warnings and Safety

©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 8©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 7

Micro Royal Galaxian Laser Warning Labels

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Operating Modes: The Micro Royal Galaxian has 2 operating

modes; sound active mode and auto mode.

• Sound Active mode -

The fixture will react to sound, chasing through the built-in programs.

• Auto Play -

This function run automatically run through all of units patterns.

Sound Active Mode: This mode allows the unit to run to the beat of

the music.

1. Press the Auto/Sound button. You are in sound active mode

if the red LED on the front of the unit ashes and every

movement.

Auto Play: This mode allows the unit to run Auto Play.

1. Press the Auto/Sound button till the red LED on the front of the

unit stays on. You are now in Auto Play.

2. Use the speed knob underneath the button to control the speed

of the program.

Remote Control: Use the included remote to control various func-

tions. Please see below for button control.

Note: This remote control code has been set for this laser, so that

the laser can be controlled out of the box. If this code happens to get

erased the remote will not work with the unit. Please see the next page

to reset the code and link the laser to the remote again.

A Button - Use this button to switch between Auto Play and Sound

Active.

B Button - Use this button to Blackout the unit.

C Button - Use this button to select colors. Either red, green, or red &

green.

D Button - Use this button to select your desired rotation.

Micro Royal Galaxian Operation

©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 9 ©American DJ® - www.americandj.com - Micro Royal Galaxian Instruction Manual Page 10

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning

the internal and external lenses should be carried out periodically to

optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing.

2. Clean the external optics with a microfiber cloth every 20 days.

3. Always be sure to dry all parts completely before plugging the

unit back in.

Cleaning frequency depends on the environment in which the fixture

operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-

mend cleaning on a monthly basis. Periodic cleaning will ensure lon-

gevity, and crisp beam output.

Micro Royal Galaxian Cleaning

Micro Royal Galaxian Trouble Shooting

Trouble Shooting: Listed below are a few common problems that

you may encounter, with solutions.

No laser output from the unit;

1. Be sure you have connected your unit into a standard wall

outlet.

2. Be sure that the unit is not in blackout mode.

3. In cold temperature situations it might take the laser a little longer

to produce output. It can take up to 3-5 minutes for the laser to

produce a beam. This is due to the laser diode which is very sen-

sitive.

Unit does not respond to sound;

1. Low frequencies (bass) should cause the unit to react to sound.

Tapping on the microphone, quiet or high pitched sounds may

not activate the unit.

Micro Royal Galaxian Laser Remote Reset

Follow these simple instructions to reset your remote code.

Erase Remote Code:

Using a small pointy utensil, carefully press and hold the white

button (2), while doing this the indicator light (1) will glow for about 5

seconds then turn o. Once the indicator light turns o release the

button (2).

Activating and Linking Remote:

This action will set the code to link the laser to your remote. You can

link more then one laser to a remote.

Using a small pointy untensil, carefully press the white button (2)

and then press any button on the remote control. After pressing the

button on the remote control the indicator light (1) will ash 4 times.

Try to control the unit with the remote. If the unit can be controlled,

setting the code was successful. If it does not control the unit, try

agin.

Model: Micro Royal Galaxian

Voltage: 12V DC 100~240V, 50/60Hz

Lasers: 350mW Blue Diode

80mW Red Diode

Dimensions: 6”(L) x 4.75”(W) x 2.5”(H)

149mm x 110mm x 60mm

Colors: Red & Blue

Weight: 2 Lbs. / .8 kgs.

Duty Cycle: None

Sound Active: Ye s

Working Position: Any Safe, Secure Position

Warranty: 90 Days

Please Note: Specications and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

Micro Royal Galaxian Specifications

American DJ®

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Auto Sensing Voltage: This xture contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged

into the power source.

Micro Royal Galaxian Warranty

MANUFACTURER’S LIMITED WARRANTY

A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American

Audio products to be free of manufacturing defects in material and workmanship for a prescribed

period from the date of purchase (see specic warranty period on reverse). This warranty shall be

valid only if the product is purchased within the United States of America, including possessions

and territories. It is the owner’s responsibility to establish the date and place of purchase by ac-

ceptable evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before

sending back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send

the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the

requested repairs or service (including parts replacement) are within the terms of this warranty,

American DJ, Inc. will pay return shipping charges only to a designated point within the United

States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories

should be shipped with the product. If any accessories are shipped with the product, American DJ,

Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the

safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is

modied in any manner which American DJ, Inc. concludes, after inspection, aects the reliability

of the product; if the product has been repaired or serviced by anyone other than the American DJ,

Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the

product is damaged because not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning

or periodic check-up. During the period specied above, American DJ, Inc. will replace defec-

tive parts at its expense with new or refurbished parts, and will absorb all expenses for warranty

service and repair labor by reason of defects in material or workmanship. The sole responsibility

of American DJ, Inc. under this warranty shall be limited to the repair of the product, or replace-

ment thereof, including parts, at the sole discretion of American DJ. All products covered by this

warranty were manufactured after January 1, 1990, and bear identifying marks to that eect.

E. American DJ, Inc. reserves the right to make changes in design and/or improvements

upon its products without any obligation to include these changes in any products theretofore

manufactured. No warranty, whether expressed or implied, is given or made with respect to any

accessory supplied with products described above. Except to the extent prohibited by applicable

law, all implied warranties made by American DJ, Inc. in connection with this product, including

warranties of merchantability or tness, are limited in duration to the warranty period set forth

above. And no warranties, whether expressed or implied, including warranties of merchantability

or tness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s

sole remedy shall be such repair or replacement as is expressly provided above; and under no

circumstances shall American DJ, Inc. be liable for any loss or damage, direct or consequential,

arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to American DJ and American Audio

Products and supersedes all prior warranties and written descriptions of warranty terms and

conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Ampli-

ers)

• All American Audio V-Plus Series Ampliers = 3-year (1095 day) Limited Warranty

• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty

(Such as: Special Eect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble

Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps,

and Star Tec Series)

• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty

• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which

have a 1-year (365 day Limited Warranty)

ADJ Galaxian Royale User manual

Brand: ADJ

Model: Galaxian Royale

Category: DJ controllers

Type: User manual

This manual is also suitable for

Micro Royal Galaxian

Download PDF

report

ADJ Galaxian Royale User manual

This manual is also suitable for

ADJ Galaxian Royale User manual

Related papers

Other documents