Renlig RENLIG FWM7D5 User manual

Brand: Renlig

Model: RENLIG FWM7D5

Category: Tumble dryers

Type: User manual

This manual is also suitable for

FWM7D5

RENLIG

FWM7D5

ENGLISH 4

Contents

Safety information 4

Product description 7

Control panel 8

First use 12

Personalisation 12

Daily Use - Washing 12

Daily Use - Drying 15

Daily Use - Washing & Drying 16

Helpful hints and tips 17

Drying Hints 18

Washing programmes 19

Drying Programmes 21

Consumption values 22

Care and cleaning 23

What to do if… 26

Technical data 29

Electrical connection 30

Environment concerns 30

IKEA GUARANTEE 31

Subject to change without notice.

Safety information

For your safety and correct operation

of the appliance, read this manual

carefully before installation and use. Always

keep these instructions with the appliance

even if you move or sell it. Users must fully

know the operation and safety features of

the appliance.

The manufacturer is not responsible for

damages caused by incorrect installation

and use.

Children and vulnerable people safety

• Do not let persons, children included, with

reduced physical sensory, reduced men-

tal functions or lack of experience and

knowledge to use the appliance. They

must have supervision or instruction for

the operation of the appliance by a per-

son who is responsible for their safety.

• Do not let children play with the appli-

ance.

• Keep all packaging well away from chil-

dren. There is risk of suffocation.

• Keep all detergents in a safe area. Do

not let children touch the detergents.

• Make sure that children or pets do not

climb into the drum. Please check into the

drum before using it.

This appliance incorporates a special

feature to prevent children and pets be-

coming trapped inside the drum.

To activate this

device, rotate the

button clockwise

(without pressing

it) inside the door

until the groove is

horizontal. If nec-

essary use a coin.

To disable this de-

vice and restore

the possibility of

closing the door,

rotate the button

anticlockwise until

the groove is verti-

cal.

General safety

• Do not change the specifications or modi-

fy this product. There is risk of injury and

damage to the appliance.

• If the appliance is delivered in the winter

months when there are minus tempera-

tures, store it at room temperature for 24

hours before using for the first time.

Please read the “dangers of freezing”

chapter.

• This appliance is designed for use in nor-

mal inside temperature. Manufacturer is

not responsible for freezing damages.

ENGLISH 4

• Always unplug the appliance and turn off

the water supply after use, cleaning and

maintenance.

Installation

• A qualified and competent person must

do the electrical and the plumbing instal-

lation.

• This appliance is heavy. Take care when

you move it.

• Make sure that the appliance is not dam-

aged because of transport. Do not con-

nect a damaged appliance. If necessary,

contact dedicated After Sales Service.

• Remove all packaging and transit bolts

before first use. Serious damage can oc-

cur to the appliance or to neighbouring

cabinets or furniture.

• Keep all transit devices so that they can

be refitted if the appliance ever has to be

transported again. Please refer to the rel-

evant steps in the Assembly Instruction.

• Never place cardboard, wood or similar

materials under the appliance to com-

pensate for any unevenness in the floor.

Level accurately the appliance and tight

the lock nuts to prevents vibration, noise

and displacement of the appliance dur-

ing operation.

• If your appliance is installed on a carpe-

ted floor, adjust the feet in order to en-

sure that the air must circulate freely un-

der the appliance.

• Check that your appliance is not standing

on the inlet and drain hose and the work-

top or the back of the appliance is not

pressing the electrical supply cable

against the wall.

• Always be sure, that there is no water

leakage from hoses and their connections

after the installation.

• If the appliance is installed in a location

subject to frost, please read the “dangers

of freezing” chapter.

Use

• The appliance is only for domestic use.

Do not use the appliance for commercial

and industrial use or for other uses.

• Only an authorised service engineer can

repair this appliance. Use only original

spare parts.

• Only wash and dry fabrics which are de-

signed to be machine washed or dried.

Follow the instructions on each garment

label.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets

are empty and buttons and zips are fas-

tened.

• Any objects such as coins, safety pins,

nails, screws, stones or any other hard,

sharp material can cause extensive dam-

age and must not be placed into the ap-

pliance.

• Treat stains such as paint, ink, rust, and

grass before washing.

• Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you overfill. Refer to

the manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces,

washable belts etc. in a washing bag or

pillow case as it is possible for such items

to slip down between the tub and the in-

ner drum.

• Do not use your appliance to wash arti-

cles with whalebones, items without hems,

frayed and torn. Underwired bras must

NOT be washed.

• As some duvets and eiderdowns should

be washed/dried in large commercial

machines because of their bulk, please

check with the manufacturer of the item

before washing in a domestic machine.

• Do not dry the damaged items which

contain padding or fillings.

• Garments which have been in contact

with volatile petroleum products should

not be appliance washed. If volatile

cleaning fluids are used, care should be

taken to ensure that the fluid is removed

from the garment before placing in the

appliance.

ENGLISH 5

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

• The users should always check that they

have not left their gas lighters (disposa-

ble or otherwise) in their clothing.

• Never tumble dry items that have had

contact with chemicals such as dry clean-

ing fluid. These are of a volatile nature

and could cause an explosion. Only tum-

ble dry items which have been washed in

water or require airing.

• Do not dry items that have been in con-

tact with inflammable solvents or cooking

oil.

• If you have washed your laundry with a

stain remover start an extra rinse cycle

before you start the dryer.

• Do not dry not washed items in the appli-

ance.

• Do not touch the glass of the door while a

programme operates. The glass can be

hot.

• Plastic detergent dispensers should not

remain in the drum during the drying cy-

cle, as the plastic used is not designed to

withstand the heat. If you wish to wash-

through-to-dry you should use the con-

ventional detergent dispenser drawer.

• If you stop the appliance before the end

of the drying cycle, immediately remove

and spread out all items, so that the heat

can dissipate.

• The water we use normally contains lime.

It is a good idea to periodically use a

water softening powder in the appliance.

Do this without any laundry into the drum

and according to the softening powder

manufacturer’s instructions. This will help

to prevent the formation of lime deposits

making your appliance more efficiency.

• Never pull the power supply cable to re-

move the plug from the socket; always

take hold of the plug itself.

• Never use the appliance if the power

supply cable, the control panel, the work-

ing surface or the base is damaged so

that the inside of the appliance is accessi-

ble.

Water inlet

• This appliance must be connected to a

cold water supply.

• Do not use connection hoses from an old

appliance to connect it to the water sup-

ply.

• The water pressure must be in the limits

(refer to the chapter «Technical data» ta-

ble). Make sure that the local water au-

thority gives you the average mains pres-

sure in your area.

• Make sure that there are no kinks in the

water inlet hose and that the water inlet

hose is not squashed or entangled.

• Before connecting up the appliance to

new pipework or to pipework that has

not been used for some time, run off a

reasonable amount of water to flush out

any debris that may have collected in the

pipes.

• Turn the inlet hose on the back of the ap-

pliance to the left or the right to suit the

installation.

• The inlet hose must not be lengthened. If

it is too short and you do not wish to

move the tap, you will have to purchase a

new, longer hose specially designed for

this type of use.

• Before opening the water tap, be sure to

tighten the ring nut well to prevent any

leaks.

Water drainage

• Make sure the end of the drain hose can-

not come unhooked when the appliance

is emptying. This could be done by tying

it to the tap with a piece of string or at-

taching it to the wall.

• The drain hose must be placed at a

height of not less than 44 cm and not

more than 90 cm. Please refer to the As-

sembly Instruction booklet.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from

the mains socket.

• Clean the exterior cabinet of the appli-

ance with soap and water only, and then

dry thoroughly.

ENGLISH 6

• The washing powder and additive dis-

penser drawer should be cleaned regu-

larly.

• Inspected the pump regularly and partic-

ularly if:

– the appliance does not empty and/or

spin

– the appliance makes an unusual noise

during draining due to objects such as

safety pins, coins etc. blocking the

pump.

• Never remove the pump cover during a

wash cycle. Always wait until the appli-

ance has drained out the water. If you

have selected an high temperature wash-

ing programme please wait until the wa-

ter has cooled down.

• Ensure that the pump cover is securely re-

tightened to prevent any leaks.

Product description

1 2

Detergent dispenser drawer

Control panel

Door opening handle

Rating Plate

Drain pump

Adjustable feet

ENGLISH 7

Detergent dispenser drawer

Compartment for detergent used for

prewash and soak phase or for stain re-

mover used during the stain action phase

(if available). The prewash and soak de-

tergent is added at the beginning of the

wash programme. The stain remover is

added during the stain action phase.

Compartment for powder or liquid de-

tergent used for main wash. If using liquid

detergent pour it just before starting the

programme.

Compartment for liquid additives (fab-

ric softener, starch).

Follow the product manufacturer’s

recommendations on quantities to

use and do not ever exceed the «MAX»

mark in the detergent dispenser drawer.

Any fabric softener or starching additives

must be poured into the compartment be-

fore starting the wash programme.

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as

the buttons and the indicator lights. These are presented by relevant numbers on the

following pages.

95°

30°

40°

60°

40°

30°

40°

1600

12 0 0

900

700

5678910

14 '

45'

Programme selector dial

Display

Delay Start button

Door locked indicator light

Start/Pause button

Extra Rinse button

Prewash button

Drying Time button

Auto-dry button

Spin reduction button

ENGLISH 8

Table of symbols

= On/Off - Reset

= Rapid 14’

= Cottons = Rinse Hold

= Synthetics = Drying

= Easy Iron = Cupboard dry

= Delicates = Iron dry

= Handwash = Drying time

= Wool

= Prewash

= Rinses = Extra Rinse

= Drain = Start/Pause

= Spin = Door locked

= Express 45’ = Delay Start

Programme selector dial It allows you to switch the appliance On/Off and/or to

select a programme.

ENGLISH 9

Display

The display shows the following information:

•

–Child safety lock.

This device permits you to leave the appliance un-

attended during it's functioning.

•

– Duration of the selected programme.

After selecting a programme, the duration is dis-

played in hours and minutes (for example

The duration is calculated automatically on the ba-

sis of the maximum recommended load for each

type of fabric. After the programme has started,

the time remaining is updated every minute.

– Selected drying time

After selecting a drying programme the drying

time is shown in minutes or hours and minutes. Af-

ter the programme has started, the time remaining

is updated every minute.

– Delayed start.

The Selected delay set by pressing the relevant

button appears on the display for a few seconds,

then the duration of the selected programme is dis-

played again. The delay time value decreases by

one unit every hour and then, when 1 hour re-

mains, every minute.

–Alarm codes.

In the event of operating problems, some alarm co-

des can be displayed, for example

(see

paragraph «What to do if...»).

– Incorrect option selection.

If an option which is not compatible with the set

wash programme is selected, the message Err is

displayed at the bottom of the display for a few

seconds and the integrated red indicator light of

button 5 start flashing.

– End of programme.

When the programme has finished the flashing

zero (

) is displayed, the indicator light 4 and the

indicator light of button 5 go out and the door can

be opened.

Delay Start button The programme can be delayed from 30 min - 60 min -

90 min, 2 hours and then by 1 hour up to a maximum of

20 hours by means of this button.

ENGLISH 10

Door Locked indicator light The indicator light 4 illuminates when the programme

starts and indicates if the door can be opened:

• light on: the door cannot be opened. The machine is

working or has stopped with water left in the tub.

• light off: the door can be opened. The programme is

finished or the water has been emptied out.

• light blinking: the door is opening in a few minutes.

Start/Pause button This button allows you to start or to interrupt the selec-

ted washing programme.

Extra Rinse button This appliance is designed for saving energy. If it neces-

sary to rinse the laundry using an extra quantity of wa-

ter (extra rinse), select this option. Some additional rin-

ses will be performed. This option is recommended for

people who are allergic to detergents, and in areas

where the water is very soft.

Prewash button By selecting this option the appliance performs a pre-

wash cycle before the main wash phase. The washing

time will be prolonged. This option is recommended for

heavily soiled laundry.

Drying Time button If you wish to carry out a timed drying programme,

press this button until the drying time you want appears

on the display according to the fabrics (cottons or syn-

thetics) you have to dry. For Cottons you can select a

drying time from 10 minutes to 250 minutes (4.10). For

Synthetics you can select a drying time from 10 minutes

to 130 minutes (2.10). Every time you press this button

the drying time increases by 5 mins.

Automatic Dry button By pressing this button you can choose the required de-

gree of drying for cottons and synthetics:

• Cupboard dry (Cottons and Synthetics)

• Iron dry (Cottons)

The pilot light corresponding to the selected dryness

degree will illuminate.

Spin button By pressing this button you can change the spin speed

of the selected programme.

• Rinse Hold option: by selecting this option the water

of the last rinse is not emptied out to prevent the fab-

rics from creasing. Before opening the door it will be

necessary to empty out the water. To empty out the

water, please read the paragraph «At the end of the

programme».

ENGLISH 11

First use

• Ensure that the electrical and water

connections comply with the installa-

tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Before the first wash, run a cotton

cycle at the highest temperature

without any laundry in the machine,

to remove any manufacturing resi-

due from the drum and tub. Pour

1/2 a measure of detergent into the

main wash compartment and start

the machine.

Personalisation

Acoustic signals

The machine is provided with an acoustic

device, which sounds in the following cases:

• at the end of the cycle

• if there is a fault.

By pressing the 7 and 8 buttons simultane-

ously for about 6 seconds, the acoustic sig-

nal is deactivated (except if there is a fault).

By pressing these 2 buttons again, the

acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appli-

ance unattended so you do not need to

worry that children might be injured by or

cause damage to the appliance. This func-

tion remains enabled also when the wash-

ing machine is not working.

There are two different ways to set this op-

tion:

1. Before pressing button 5: it will be im-

possible to start the machine.

2. After pressing button 5: it will be impos-

sible to change any other programme

or option.

To enable or disable this option press simul-

taneously for about 6 seconds buttons 9

and 10 until on the display, the icon

ap-

pears or disappears.

Daily Use - Washing

Open the door

Open the door by carefully pulling the door

handle outwards.

Load the laundry

Place the laundry in

the drum, one item

at a time, shaking

them out as much

as possible.

By pushing the

porthole frame,

close firmly the

door.

Measure out detergent and fabric

softener

Pour the detergent

into the main wash

compartment

in the appropriate

compartment if the

selected pro-

gramme/option it

requires (see more

details in "Deter-

gent dispenser

drawer").

To pour the right

quantity of the de-

tergent, see more

ENGLISH 12

details in "Degrees

of water hardness".

Pour fabric softener

into the compart-

ment marked

(must not exceed

the «MAX» mark in

the drawer).

Close the drawer gently

Select the required programme by turning

the programme selector dial (1)

The appliance is now switched on. The indi-

cator light of button 5 starts to blink.

At the end of the programme the selector

dial must be turned to position O, to switch

the appliance off.

For the description of each wash cycle,

the compatibility among the washing

programmes and the options, consult the

chapter «Washing Programmes».

Caution! If you turn the programme

selector dial to another programme

when the appliance is working, the red

indicator light of button 5 will blink 3 times

and the message Err appears on the

display to indicate a wrong selection. The

appliance will not perform the new selected

programme.

Reduce the spin speed or select the Rinse

Hold by pressing button 10

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 10 repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed. The relevant indi-

cator light illuminates.

Select the available options by pressing

buttons 6 and 7

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the pro-

gramme.

When these buttons are pressed, the corre-

sponding indicator lights illuminate. When

they are pressed again, the indicator lights

go out. If an incorrect option is selected, the

integrated red indicator light of the button

5 flashes for 3 times and the message Err

appears on the display.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing button

Before you start the programme, if you wish

to delay the start, press this button to select

the desired delay.

The selected delay time value will appear

on the display for a few seconds, then the

duration of the programme will appear

again.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button 5.

Selecting the delay start :

1. Select the programme and the required

options.

2. Select the delay start by pressing but-

ton 3.

3. Press button 5:

– the machine starts its hourly count-

down.

– the programme will start after the se-

lected delay has expired.

Cancelling the Delay Start after having star-

ted the programme:

1. Set the washing machine to PAUSE by

pressing button 5.

2. Press button 3 once. On the display will

appear

ENGLISH 13

3. Press button 5 again to start the pro-

gramme.

• The selected delay can be changed

only after selecting the washing pro-

gramme again.

• The door will be locked throughout

the delay time. If you need to open

the door, you must first set the wash-

ing machine to PAUSE by pressing

button 5 and wait a few minutes be-

fore opening the door. After you

have closed the door, press the

same button again.

•The Delay Start cannot be selected

with the draining programme.

Start the programme by pressing button 5

To start the selected programme, press this

button; the corresponding green indicator

light stops blinking.

The indicator light 4 illuminates to indicate

that the appliance starts operating and the

door is locked.

If you have chosen a delayed start, the ma-

chine will begin the countdown.

If an incorrect option is selected, the

message Err appears on the display

for a few seconds and the red indicator

light of the button 5 blinks 3 times.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out.

Before you make any change, you must

PAUSE the appliance by pressing the button

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to O and then to the new pro-

gramme position. Start the new programme

by pressing the button 5 again. The wash-

ing water in the tub will be not emptied out.

Interrupting a programme

Press the button 5 to interrupt a programme

which is running, the corresponding green

indicator light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to O to cancel a pro-

gramme which is running.

You can select now a new programme.

Opening the door after the programme

has started

First set the machine to pause by pressing

the button 5.

If the indicator light 4 blinks and after a few

minutes goes off, the door can be opened.

If the indicator light 4 remains lit, this means

that the machine is already heating or that

the water level is too high. In any case, do

not try to force the door open!

If you cannot open the door but you need

to open it, you have to switch the machine

off by turning the selector dial to

. After

a few minutes the door can be opened.

After closing the door, it is necessary to se-

lect the programme and options again and

to press button 5.

Caution! Pay attention to the water

level and temperature!

At the end of the programme

The machine stops automatically. Some

acoustic signals sound and a blinking

ap-

pears on the display, the indicator light of

button 5 and the indicator light 4 go off.

If a programme or an option that ends with

water left in the tub has been selected, the

indicator light 4 remains on and the door is

locked to indicate that the water must be

emptied out before opening the door.

To empty out the water:

Turn the programme selector dial to

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing button 10.

4. Press button 5.

ENGLISH 14

At the end of the programme, the door is

released and can be opened. Turn the pro-

gramme selector dial to

to switch the

machine off.

Remove the laundry from the drum and

carefully check that the drum is empty. If

you do not intend to carry out another

wash, close the water tap. Leave the door

open to prevent the formation of mildew

and unpleasant smells.

Stand by : once the programme has finish-

ed after a few minutes the energy saving

system will be enabled. The brightness of

the display is reduced. By pressing any but-

ton the appliance will come out of the ener-

gy saving status.

Daily Use - Drying

Drying only

Caution!

The recommended load size is 3.5 kg for

cottons and linen and 2 kg for synthetic

items.

By pressing Drying Time button it is al-

so possible to dry up to 5 kg of cotton

items (see the «Drying Programme » table).

Caution!

The water tap must be open and the drain

hose must be positioned in the sink or con-

nected to the drain pipe.

1. Load the laundry.

2. Select a spin cycle at the maximum spin

speed allowed for the type of laundry

in order to obtain the best drying per-

formances.

3. Select the drying programme for Cot-

tons or Synthetic in the Drying sector of

the programme selector dial.

4. If you wish to select an automatic dry-

ing (for cottons and synthetic items on-

ly), press the button 9 until the pilot light

corresponding to the required dryness

degree illuminates.

5. If you wish to select a timed drying,

press the button 8 until the time you

want appears on the display (see the

«Drying Programme» table). Every time

you press this button the drying time in-

creases by 5 minutes.

The programme time will automatically

increase by some minutes.

6. Press button 5 to start the programme.

The time remaining is updated every

minute.

7. At the end of the programme, the buz-

zer sounds. The blinking

appears on

the display. The door pilot light 4 is on.

During the last minutes of the drying cy-

cle the appliance performs an anti-

crease phase. Through this time the

door is locked. The display shows the

blinking

At the end of the anti-crease phase the

door pilot light 4 is off.

If you wish to open the door before or

during the anti-crease phase or to in-

terrupt it, press any button or turn the pro-

gramme selector dial to any programme

position (except

Turn the selector dial to the

position

to switch the machine off.

9. Remove the laundry from the drum.

The different type of cottons (towelling,

sheets, shirts, and so on) or any laun-

dry items rolling up during the spinning

phase may result in partial dryness. In the

exceptional case that at the end of the cycle

the laundry remains slightly wet, we suggest

that you unfold the rolled up items, redis-

tribute them evenly in the drum and select

an additional drying cycle of 20-30 mi-

nutes.

ENGLISH 15

If you set only 10 minutes of drying

phase with the drying time button (8),

the appliance performs only a cooling

phase.

Daily Use - Washing & Drying

NON-STOP programme - Washing and

Timed Drying

The recommended load size is 3.5 kg for

cotton and 2 kg for synthetic.

It is also possible to dry up to 5 kg of

cotton items (see the «Drying Pro-

gramme » table).

Caution! Do not use a dosing device/

ball when carrying out a washing

and drying programme.

1. Load the laundry and add detergent

and fabric softener.

2. Switch the machine on by turning the

selector dial to the set washing pro-

gramme/fabric.

3. Select the required options by pressing

the relevant buttons.

If possible, do not select a spin speed

lower than that proposed by the ap-

pliance to avoid too long a drying time

therefore saving energy.

In any case the reduction of the spin

speed is only possible after selecting

drying.

The lowest values you can select are

900 r.p.m. for cottons and synthetics

and 700 r.p.m. for delicate fabrics.

4. Set the drying time by pressing button

8. The display shows the whole dura-

tion of the washing and the set drying

cycle.

If you set a washing programme and

only 10 minutes of drying cycle, the to-

tal duration displayed includes also the un-

rolling and the cooling phase.

5. Start the programme by pressing but-

ton 5. The time remaining is updated

every minute on the display.

6. At the end of the programme turn the

selector dial to the

position to switch

the machine off and remove the laun-

dry.

NON-STOP programme - Washing and

Automatic Drying

The maximum load size is 3.5 kg for cotton

and 2 kg for synthetic.

Caution! Do not use a dosing device/

ball when carrying out a washing

and drying programme.

1. Load the laundry.

2. Add detergent and fabric softener.

3. Switch the machine on by turning the

selector dial to the set washing pro-

gramme/fabric.

4. Select the required options by pressing

the relevant buttons.

If possible, do not select a spin speed

lower than that proposed by the ap-

pliance to avoid too long a drying time

therefore saving energy.

In any case the reduction of the spin

speed is only possible after selecting

drying.

For cottons and synthetic the lowest

value you can select is 900 r.p.m.

5. Set the dryness degree by pressing but-

ton 9. The display shows the whole du-

ration of the washing and the set drying

cycle.

6. Start the programme by pressing but-

ton 5. The time remaining is updated

every minute on the display.

7. At the end of the programme turn the

selector dial to the

position to switch

the machine off. Remove the laundry.

Fluff in the garments

During the WASHING AND/OR DRYING

PHASE, certain types of fabric, as sponge-

cloth, sweatshirt, could release fluff.

ENGLISH 16

The released fluff could stick to the fabrics

during the next cycle.

This drawback increases with technical fab-

rics.

To prevent the lint in your clothes, it is rec-

ommended:

• To do not wash dark fabrics after you

washed and dried light coloured fabrics

(new sponge, sweatshirt especially) and

vice versa.

• To air-dry this type of fabrics when they

are washed the first time.

• To clean the filter.

• Perform one or more rinse cycles to wash

the drum between the washing and dry-

ing of fabrics with different colours.

• After the drying phase, thoroughly clean

the empty drum, the gasket and the door

with a wet rag.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each gar-

ment label and the manufacturer’s washing

instructions. Sort the laundry as follows:

whites, coloureds, synthetics, delicates,

woollens.

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisa-

ble to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

stain remover product then rub in the soap

and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth

and dab the stain; treat several times.

Dried grease stains: moisten with turpen-

tine, lay the garment on a soft surface and

dab the stain with the fingertips and a cot-

ton cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since

the cellulose structure will already have

been damaged and the fabric tends to

hole.

Mould stains: treat with bleach, rinse well

(white cottons and fast coloureds only).

Grass: soap lightly and treat with bleach

(white cottons and fast coloureds only).

Ball point pen and glue: moisten with ace-

tone

, lay the garment on a soft cloth and

dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with

bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

, then with ace-

tic acid; treat any residual marks on white

fabrics with bleach and then rinse thor-

oughly.

Tar stains: first treat with stain remover, me-

thylated spirits or benzine, then rub with

detergent paste.

Degrees of water hardness

Water hardness is classified in so-called

“degrees” of hardness. Information on

hardness of the water in your area can be

obtained from the relevant water supply

company, or from your local authority.

Characteristic

Degrees of water hardness

German °dH French °T.H.

Soft 0-7 0-15

1) do not use acetone on artificial silk

ENGLISH 17

Characteristic

Degrees of water hardness

German °dH French °T.H.

Medium 8-14 16-25

Hard 15-21 26-37

Very hard > 21 > 37

A water softener must be added when water has a medium-high degree of hardness.

Follow the manufacturer’s instructions. The quantity of detergent can then always be

adjusted (reduced) to degree of hardness soft.

Drying Hints

Preparing the drying cycle

As a dryer, the appliance works on the con-

densation principle.

Therefore, the water tap must be open

and the drain hose must drain water into

a sink or into the drain pipe, even during

the drying cycle.

Attention!

Before starting the drying programme, re-

duce the loads of washed laundry, in order

to obtain good performances.

Laundry not suitable for drying

• Particularly delicate items such as syn-

thetic curtains, woollen and silk, garments

with metal inserts, nylon stockings, bulky

garments such as anoraks, bed covers,

quilts, sleeping bags and duvets must not

be machine dried.

• Avoid drying dark clothes with light col-

oured fluffy items such as towels as these

can attract the fluff.

• Remove the laundry when the appliance

has finished drying.

• To avoid a static charge when drying is

completed, use either a fabric softener

when you are washing the laundry or a

fabric conditioner specifically for tumble

dryers.

• Garments padded with foam-rubber or

materials similar to foam-rubber must not

be machine dried; they represent a fire

hazard.

• Also, fabrics containing residue of setting

lotions or hair sprays, nail solvents or sim-

ilar solutions must not be machine dried

in order to avoid the formation of harmful

vapours.

The detergent and any additives must be

placed in the appropriate compartments of

the dispenser drawer before starting the

wash programme.

If using liquid detergents, a programme

without prewash must be selected.

Your appliance incorporates a re-circula-

tion system which allows an optimal use of

the concentrated detergent.

ENGLISH 18

Follow the product manufacturer’s recom-

mendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer.

Garment labels

For drying, follow the indications given on

the manufacturer’s labels:

•

= May be tumble dried

•

= Drying at high temperature

•

= Drying at reduced temperature

•

= Do not tumble dry.

Drying cycle duration

The drying time may vary depending on:

• speed of the final spin

• dryness degree required (iron dry, store

dry)

•type of laundry

• weight of the load size .

The average drying time for a timed drying

are indicated in the «Drying programmes»

chapter. The experience will help you to dry

your laundry in a more suitable way, ac-

cording to the different fabrics. Take note of

the duration drying time of the already per-

formed cycles.

Additional drying

If the laundry is still damp at the end of the

drying programme, select a short drying cy-

cle again.

Warning! Do not over dry the laundry

in order to avoid creasing of fabrics

or garment’s shrinking.

Washing programmes

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Available

Options

Detergent

Compartment

Cottons

95°-60°

White cotton (heavy-

normally soiled

items).

Main wash

Rinses

Max. final spin at

1600 rpm

7 kg Spin

Rinse Hold

Prewash

Extra Rinse

ECO

Cottons Econ-

omy

60°-40°

White and fast col-

oured cotton (nor-

mally-lightly soiled

items).

Main wash

Rinses

Max. final spin at

1600 rpm

7 kg Spin

Rinse Hold

Prewash

Extra Rinse

Cottons

40°-30°

Coloured cotton

(normally-lightly

soiled items).

Main wash

Rinses

Max. final spin at

1600 rpm

7 kg Spin

Rinse Hold

Prewash

Extra Rinse

Synthetics

60°-40°

Synthetic or mixed

fabrics: underwear,

coloured garments,

non-shrink shirts,

blouses.

Main wash

Rinses

Max. final spin at

900 rpm

3.5 kg Spin

Rinse Hold

Prewash

Extra Rinse

ENGLISH 19

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Available

Options

Detergent

Compartment

Synthetics

Easy Iron

40°

Selecting this pro-

gramme the laundry

is gently washed and

spun to avoid any

creasing. In this way

ironing is easier. Fur-

thermore the appli-

ance will perform

additional rinses.

Main wash

Rinses

Max. final spin at

900 rpm

1.5 kg Spin

Rinse Hold

Prewash

Extra Rinse

Delicates

40°-30°

Delicate fabrics: for

example curtains.

Main wash

Rinses

Max. final spin at

700 rpm

3.5 kg No Spin

Rinse Hold

Super Quick

Prewash

Extra Rinse

Handwash-

Wool

40°-30°

Special programme

for wool garments

and delicate fabrics

bearing the «Pure

new wool, non-

shrink, appliance

washable» and

«hand washing» la-

bels.

Main wash

Rinses

Max. final spin at

900 rpm

2 kg Spin

Rinse Hold

Rinses

With this programme

it is possible to rinse

and spin cotton gar-

ments which have

been washed by

hand. The appliance

performs some rin-

ses, followed by a fi-

nal long spin. The

spin speed can be

reduced.

Rinses

Max. final spin at

1600 rpm

7 kg Spin

Rinse Hold

Extra Rinse

Drain

For emptying out the

water of the last

rinse in programmes

with the Rinse Hold

option selected.

Draining of water

7 kg

ENGLISH 20

Page is loading ...

Renlig RENLIG FWM7D5 User manual

Brand: Renlig

Model: RENLIG FWM7D5

Category: Tumble dryers

Type: User manual

This manual is also suitable for

FWM7D5

Download PDF

report