Polaris Vac-Sweep 360 Installation guide

Polaris 360 Universal Wall Fitting

Connector Assembly

Installation Instructions

1. Remove and discard the old parts that

connect the 360 hose to the pool wall.

2. Unscrew the universal wall fitting from the

quick disconnect. Screw the universal wall

fitting into the 1-1/2” return line by hand.

3. Turn the quick disconnect into the universal

wall fitting by hand. Once the universal wall

fitting is secure, the quick disconnect can be

removed without removing the universal

wall fitting.

4. Put the hose nut onto the end of the

quick disconnect.

5. Push the hose onto the quick disconnect and

screw the hose nut onto the hose.

Pool

Wall

Install

Universal

Wall Fitting

Quick

Disconnect

Hose

Nut

and the Polaris 3-wheeled

cleaner design are registered trademarks of Zodiac Pool Systems, Inc.

All other trademarks referenced herein are the property of their respective owners.

TL-820 Rev C

Zodiac Pool Systems, Inc.

2620 Commerce Way, Vista, CA 92081

1.800.822.7933 | www.polarispool.com

Download PDF