AOR AR8200-MK3-IR Owner's manual

AOR
Brand
AOR
Model
AR8200-MK3-IR
Type
Owner's manual

AOR AR8200-MK3-IR is a modified version of the standard AR8200MKIII receiver, designed for government applications and fully compatible with Night Vision Goggles (NVGs).

The device features an IR (Infra-Red illumination) function that deactivates the original green LED display and keypad illumination, replacing it with an IR LED that is only visible with NVGs.

This function is compatible with military-grade NVGs capable of matching the 950nm spatial distribution of the IR LEDs.

To toggle between normal LED display mode and IR LED mode, press and hold the rotary dial on the left side of the receiver for 2 seconds until a beep is heard.

AOR AR8200-MK3-IR is a modified version of the standard AR8200MKIII receiver, designed for government applications and fully compatible with Night Vision Goggles (NVGs).

The device features an IR (Infra-Red illumination) function that deactivates the original green LED display and keypad illumination, replacing it with an IR LED that is only visible with NVGs.

This function is compatible with military-grade NVGs capable of matching the 950nm spatial distribution of the IR LEDs.

To toggle between normal LED display mode and IR LED mode, press and hold the rotary dial on the left side of the receiver for 2 seconds until a beep is heard.

Manual addendum
AR8200MKIII-IR
®
®®
®
In addition to the standard features of the AR8200MKIII receiver, the AR8200MKIII-IR has
been modified to be fully Night Vision Goggle (NVG) compatible for government
applications.
When the IR (Infra-Red illumination) function is activated, the original green LED that
illuminates the display and keypad is deactivated. The front keypad and the LCD screen
are then illuminated by the IR LED that is only visible with NVG.
The IR function is only compatible with military grade NVGs, capable to match the 950nm
spatial distribution of our IR LEDS .
Spatial distribution of the 950nm infrared LED
To toggle between the normal LED
display mode and the IR LED mode:
1.
Power on the receiver by pressing
the orange PWR button.
2.
Push and hold the rotary dial on the
left side of the receiver for 2
seconds until a beep is heard.
The LED (normal or IR) on/off behavior depends on the LAMP setting, which can be set in three different ways:
LAMP AUTO
(Out of the box default)
Set this mode as follows:
1. Press the FUNCTION key. “FUNC”
will appear on the upper left corner
of the screen.
2. Press the 7 key (CONF) to enter
the configuration mode.
3. With the down arrow key, go to
LAMP and select AUTO by rotating
the rotary dial.
4. Press the ENT key to validate.
Whichever LED type selected, it is
now in auto-mode, meaning it will
only be lit in the two following
situation:
● Any of the keys is pressed.
LEDS will then switch off after
5 seconds.
● Squelch opens by signal level
received higher than set level.
LEDS will then switch off after
5 seconds.
To toggle between normal LED and
IR LED, push and hold the rotary
dial for 2 seconds until a beep is
heard
.
CONT
(Normal or IR LEDS always lit)
This is the mode you will want to set in
order to test your NVG.
Set this mode as follows:
1. Press the FUNCTION key. “FUNC” will
appear on the upper left corner of the
screen.
2. Press the 7 key (CONF) to enter the
configuration mode.
3. With the down arrow key, go to LAMP
and select CONT by rotating the rotary
dial.
4. Press the ENT key to validate.
Whichever LED type selected, it is now
always ON.
To toggle between normal LED and IR
LED, push and hold the rotary dial for 2
seconds until a beep is heard.
OFF
(Normal or IR LEDS always off)
Set this mode as follows:
1. Press the FUNCTION key. “FUNC”
will appear on the upper left corner of
the screen.
2. Press the 7 key (CONF) to enter the
configuration mode.
3. With the down arrow key, go to LAMP
and select OFF by rotating the rotary
dial.
4. Press the ENT key to validate.
Whichever LED type selected, it is
now always OFF.
POWER
FUNCTION
ROTARY DIAL
CONF (7)
ENTER
DOWN ARROW
  • Page 1 1

AOR AR8200-MK3-IR Owner's manual

AOR
Brand
AOR
Model
AR8200-MK3-IR
Type
Owner's manual

AOR AR8200-MK3-IR is a modified version of the standard AR8200MKIII receiver, designed for government applications and fully compatible with Night Vision Goggles (NVGs).

The device features an IR (Infra-Red illumination) function that deactivates the original green LED display and keypad illumination, replacing it with an IR LED that is only visible with NVGs.

This function is compatible with military-grade NVGs capable of matching the 950nm spatial distribution of the IR LEDs.

To toggle between normal LED display mode and IR LED mode, press and hold the rotary dial on the left side of the receiver for 2 seconds until a beep is heard.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents