Hitachi WR 16SA S User manual

Category
Power drills
Type
User manual
“Out Perform - Out Last”
Drill/Drivers
DS14DVF3
14.4v 10mm Cordless Driver Drill
DS14DMR(HS)
14.4v 10mm Cordless Driver Drill
DS18DVF3
18v 13mm Cordless Driver Drill
DS18DVB2
18v 13mm Cordless Driver Drill
DS18DMR(HS)
13mm Cordless Driver Drill
DV14DMR(HS)
14.4v Cordless Impact Driver Drill
DV18DMR(HS)
18v Cordless Impact Driver Drill
WH12DMR(HH)
Cordless Impact Driver
WH14DMR(HS)
14.4v Cordless Impact Driver
WR14DMR(HS)
14.4v Cordless Impact Driver
Impact Hammer Drill/Drivers
Impact Drivers/Wrenches
- 10mm keyless chuck
- 22-stage adjustable clutch for
precise torque settings
- Maximum torque of 34Nm
- Soft grip, slip resistant handle
- Comes with torch, bit set and
2 x 1.4Ah batteries
- Powerful 50Nm of Torque
- 13mm Keyless chuck
- 22-stage torque adjustment
- Comfortable non-slip grip handle
- New Super Ni-MH battery
- 13mm keyless chuck
- 22-stage adjustable clutch for
precise torque setting
- Maximum torque of 45Nm
- Soft grip, slip resistant handle
- Comes with torch, bit set and
2 x 1.4Ah batteries
- Two speed, variable speed reverse
- Electronic feedback power control
- 22-stage torque adjustment
- 13mm keyless chuck
- High 45Nm torque
- Electric brake
- Soft grip handle & belt hook
- 2 x 2.0Ah batteries
- 2-speed, variable speed reverse
- 13mm keyless chuck
- 22-stage torque adjustment
- Automatic spindle lock & single
sleeve chuck for quick bit setting
- Powerful fan cooled motor
- High Power 65Nm torque
- New Super Ni-MH batteries
(available in 2 & 3 battery option)
- 22 position torque adjustable clutch
- Powerful 52Nm of Torque
- 3 mode selection: Drill, impact drill,driv-
er
- 13mm keyless chuck
- Improved cooling efficiency
- Soft grip handle
- New Super Ni-MH battery
- 22 position torque adjustable clutch
- Powerful 62Nm of Torque
- 3 mode selection: Drill, impact drill,driver
- 13mm keyless chuck
- Improved cooling efficiency
- Soft grip handle
- New Super Ni-MH battery
(available in 2 & 3 battery option)
- High durability, dust resistant for long life
- Variable speed in trigger also with
reverse switch
- Double moulded non-slip grip handle
- Powerful 140Nm of torque
- 1/4” hex drive
- Angle adjustable hook with light
- New Super Ni-MH battery
NEW HITACHI
SUPER Ni-MH BATTERIES
Now Available on all 14.4v & 18v MODELS
SUPER Ni-MH
5% More Torque
50% More Life
- High durability, dust resistant for long life
- Variable speed in trigger also with
reverse switch
- Double moulded non-slip grip handle
- Powerful 200Nm of torque
- 1/2” hex drive
- Angle adjustable hook with light
- New Super Ni-MH battery
NEW
NEW
SUPER
SUPER
NI-MH BA
NI-MH BA
TTER
TTER
Y
Y
MORE POWER.
MORE LIFE.
- Powerful tightening torque of 130Nm
- Compact & lightweight body
- Powerful cooling fan for high-motor durability
- Light equipped 5 step angle
adjustable hook
- Replaceable carbon brushes
- Soft grip, slip resistant handle
- 1/4” Hex drive
“Out Perform - Out Last”
Impact Drivers / Wrenches
WH18DMR(HS)
18v Cordless Impact Driver
WR18DMR(HS)
18v Cordless Impact Wrench
WF4DYB
12v Cordless Auto Feed Impact Driver
CR18DMR(HC)
18v Cordless Reciprocating Saw
KC18DMR(HB)
18v Cordless Combo Kit
D13
13mm High Torque Drill
D13VF
13mm Variable Speed Drill
DMT16
16mm High Torque Drill
DC120VA
120mm Diamond Core Drill
DV18V
18mm Impact Drill
DV20VB2
20mm Impact Drill
Sabre Saws / Screwdrivers
Combo Kits
Drills
Impact Drills
- Powerful tightening torque of 157Nm
- Compact & lightweight body
- Variable speed trigger with reverse switch
- Powerful cooling fan for high-motor durability
- Light equipped 5 step angle adjustable hook
- Soft grip, slip resistant handle
- New Super Ni-MH battery
(available in 2 & 3 battery option)
- Powerful tightening torque of 231Nm
- Compact & lightweight body
- Variable speed trigger with reverse switch
- Powerful cooling fan for high-motor durability
- Light equipped 5 step angle adjustable hook
- Soft grip, slip resistant handle
- New Super Ni-MH battery
(available in 2 & 3 battery option)
- Removable auto-feed attachment
- Powerful impact 90Nm of torque
- Variable speed reverse
- Slip-resistant soft grip handle
- Two-finger sized trigger switch
- Flat type battery making it easier to
get into tight spaces
- High output of 380W
- Longest cutting stroke in category
- Tough Die-Cast aluminium casing
HITACHI
SUPER Ni-MH
5% More Torque
50% More Life
“Out Perform - Out Last”
- Adjustable handles for comfortable
grip
- Built for high torque applications
- Powerful 720 watt motor
- Triple reduction gearing
- Keyed chuck
- Reversible
- Industrial grade 710 watt motor
- Heavy duty alloy gear casting
- Variable speed reverse
- Electric brake
- Keyed chuck
- Mechanical two speed gear selector
- Industrial grade 16mm keyed chuck
- “D” handle for comfortable grip
- Powerful 900 watt motor
- Electronic soft start & constant
speed control
- Massively powerful 1,400 watt motor
- Synchronised dual variable speed
- High 120mm capacity in concrete
- Safety release clutch
- Robust 16mm chuck
- Compact & lightweight
- Soft grip handle for increased comfort
- Powerful 690 watt motor
- Durable aluminium gear cover and inner
cover
- 2-speed, variable
- Push button type forward-reverse change
over switch
- Synchronised gear sift mechanism
- Easy to use mode switching
- Easy to handle large trigger
- Variable speed and reverse
- Powerful 790 watt motor
- DV18DMR -18v Cordless Impact
Hammer Driver Drill
- CR18DMR 18v Cordless
Reciprocating Saw
- C18DMR 18v Cordless Circular Saw
- UB18DL 18v Lantern & Charger
- 2 Super Ni-MH Batteries
(Also available in 3 battery option)
SUPER
SUPER
MORE POWER.
MORE LIFE.
“Out Perform - Out Last”
Impact Wrench
WR16SA
12.7mm Impact Wrench
WR22SA
Impact Wrench
DH24PB3
24mm Rotary Hammer
DH24PC3
24mm Rotary Hammer
DH40MR
40mm Rotary Hammer Drill
DH45MR
45mm Rotary Hammer
H60MRV
Demolition Hammer
H65SB2
Demolition Hammer
G10SD2
100mm Angle Grinder
G12SE2
115mm Angle Grinder
G13SE2
125mm Angle Grinder
G18SE3
180mm Angle Grinder
Rotary Hammer Drills
Demolition Hammers
Grinders
- Powerful 480 watt motor with
maximum torque of 360Nm
- Compact & lightweight
- Slip resistant and comfortable soft
grip handle
- Higher durability thanks to metallic
bearing bushing
- Powerful 1,350 watt motor
- Slip resistant soft grip handle
- Constant/Variable speed control
- Fast full load stricking rate of 1,650bpm
- Vibration-absorbing handle for excellent vibration reduction
- High chipping and demolishing performance with low vibration
and low noise level
- Internal double-insulation construction with sturdy aluminium frame
- Powerful 760 watt motor
- High power to weight ratio
- Advanced seal technology
- Ergonomic 15
O
side handle
- Compact, lightweight & modern
- Low profile gearbox allows access
to restricted areas
- Spindle lock for easy to replace
grinding wheel
- Wear resistant of armature coil
- Excellent overload durability
- Powerful 1,200 watt motor
- Compact and lightweight
- Spindle lock for easy to replace
grinding wheel
- Wear resistance of armature coil
- Excellent overload durability
- Powerful 1,200 watt motor
- Compact and lightweight
- Powerful 800 watt motor with top class
drilling speed
- Forward/Reverse changeover switch
- Idle hammering prevention mechanism
- Slip resistant, double layer moulded
gear cover and handle
- 2 mode action: hammer drilling & drilling only
- Powerful 800 watt motor with top class
drilling speed
- Forward/Reverse changeover switch
- Idle hammering prevention mechanism
- Slip resistant, double layer moulded
gear cover and handle
- 3 mode action: hammer drilling & drilling only & Hammer only
- Two mode action; Hammer drilling,
hammer only
- Lightweight & powerful
- Soft touch grip for comfort & control
- Powerful 10 joules per strike rate
- Powerful industrial 950 watt motor
- Easy adjustable front & side handle
- SDS-max drive
- Variable speed control with impact
rate of 1200-2500bpm
- Needle-pin type slip clutch
- Internal double-insulation construction
- High drilling speed & high demolition performance
- Change lever for switching between,“Rotary + Hammering”,
“Neutral” & “Hammering only”
- Soft-touch grip handle and side handle for easier handling
- Strongest demolition power and durability
in this class
- Low noise and vibration level
- Triple dust sealed, double insulated design
- Comfortable shock absorbing handles
- Robust construction for longer life
- High impact energy: 42 joules
- Strong alloy motor housing
- Dust proof ball bearing portion &
durable retainer
- New construction to protect grease
leakage
- Tool-less angle adjustment of wheel guard
- Spindle lock 3-position side handle
- Prolonged service life and wear resistant
- Powerful 2,400 watt motor
- Powerful 850 watt motor with
maximum torque of 610Nm
- Compact & lightweight
- Slip resistant and comfortable soft
grip handle
- Durable double-insulated motor thanks
to the highly strong (rigid) aluminium
die-cast body
“Out Perform - Out Last”
Grinders
G23SE2(H6)
230mm Angle Grinder
G23UB2
230 Angle Grinder
SAT180
180mm Sander / Polisher
GP2
25mm Die Grinder
SV12SG
Orbital Palm Sander
SB10T
100 x 610mm Belt Sander
SV13YA(H1)
125mm Orbital Sander
SB75
Belt Sander
C5YC
Dustless Metal Cutting Circular Saw
C7YA(FCB)
185mm Dustless Saw
C7SB2
185mm Circular Saw
C9
235mm Circular Saw
Sander / Polisher & Grinder
Sanders
Circular Saws
- Dust-proof ball bearing
- Tool-less wheel guard can be
adjusted to any angle
- Long life carbon brushes
- More durable ball bearing retainer
- Wear resistance of armature coil
- Powerful 2,400 watt motor
- Carry case
- Compact design for easy access to
hard to reach locations
- High speed for a smooth and
accurate finish
- High power from a 520 watt
industrial motor
- Convenient tool rest
- 2-speed for rapid stock removal & fine
finish sanding
- Efficient dust collection with a large dust
bag
- Powerful industrial grade 1,000 watt
motor
- Extended base suitable for flush sanding
- Powerful 230 watt motor
- Variable speed 7,000-12,000rpm
- Ergonomic design
- Large soft grip handle
- Pad control system
- Complete ball bearing construction
for smooth operation
- Lightweight and compact
- Multi-purpose cutter
- Fast and powerful
- Clear view of cutting line
- Robust and accurate
(Comes with 125mm FCB Blade or
Diamond Blade)
- Easy access adjustment lever with
55
O
bevel capacity
- Magnesium gear cover, blade cover
and lower guard
- Soft and comfortable with slip resist
ant moulded grip
- Heavy duty die cast aluminium base
- Powerful 1,710 watt motor
- No saw slump, ideal for saw bench
accessories
- Powerful industrial 2,000 watt motor
- Max depth of cut:86mm (3-3/8”)
- Clear view of cutting line
- Compact and easy to use
- Rigid nickel alloy base
- Powerful 2,400 watt motor
- Three position side handle
- Easy to use large safety lock switch
- Tool-less angle adjustment of wheel
guard
- Soft start for minimised kick back reaction
- Dust proof ball bearing portion & durable retainer
- New construction to protect from grease leakage
- Powerful 950 watt motor
- No-load speed range: 1900-3400rpm
- Robust construction for longer life
- Two-speed dust sealed switch
- Dust resistant design
- Soft grip for ease of operation &
reduce operator fatigue
- Sanding rate best in class
- Easily accessible switch suits left or
right hand operation
- Easy and quick paper changing with
convenient lever clamp
- Also compatible with velcro backed sand paper
- 2-speed for rapid stock removal & fine
finish sanding
- Large belt size for rapid sanding and
stock removal
- Powerful industrial grade 1,100 watt
motor
- Extended base suitable for flush
sanding
- Convenient dustless operation for user
safety when used with appropriate
accessories
- Lightweight & well-balanced for user
comfort
- Specifically built for cutting fibre-cement
- 4-tooth, diamond tipped fibre-cement blade
- Heavy duty industrial grade 1,400 watt motor
“Out Perform - Out Last”
Sabre Saws
CR13VA
130mm Reciprocating Saw
CR13VC
130mm Reciprocating Saw
C10FCE
255mm Compound Mitre Saw
C12LCH
305mm Compound Mitre Saw
C10FSB
262mm Slide Compound Mitre Saw
C12FSA(B)
305mm Slide Compound MItre Saw
CC14SF
14” Cut Off Machine
CC16SA
405mm Cut Off Machine
P20SB(TCT)
82mm Finishing Planer
P20SA2
82mm Rebate Planer
W6V4
Screwdriver
W6VA4
Screwdriver
Cut Off Machines
Slide Compound Saws
Mitre Saws
Planners
Screwdrivers
- Intense power for toughest cutting jobs
- Horizontal handle with soft, vibration reducing
elastomaster grip adds comfort & control
- Thumb actuated positive stops, easy to use
for quick mitre adjustments
- Carbon brush access, allows user to replace
brush as needed to greatly prolong tool life
- Laser guide system for easy adjustment
- Digital display panel that indicates mitre and
bevel angles
- Bevel angle fine adjustment mechanism
- Soft vibration reducing grip
- Powerful 1950 Watt motor
- Built-in soft start & electric constant
speed control
- Dual slide rails for smooth & accu-
rate cutting
- Quiet, low vibration belt drive
- Powerful 1,650 watt motor
- Bevel left and right
- Mitre angles R:0-57
O
L:0-57
O
- Built-in soft start & electronic constant speed control
- Positive angle stoppers for desired angle cut
- Poly V-belt and motor driving system for longer
life
- Splinter guard, also serving for cut alignment
- Easy to read angle scale and bevel scale
- Powerful 1,450 watt motor
- Powerful 2400 watt motor
- Soft grip handle
- Spindle lock system
- One touch vise system for quick
feeding and easy tightening
- High speed feeding of the vise
- Adjustable angle vice cutting up to 45
O
- Wind up vise with thread protection
- Large capacity: 120mm pipe
- Double reinforced base
- 2,400 watt motor
- Comes with TCT blades
- Highest power to weight ration in its
class
- Maximum pass of 1mm
- 620 watt motor
- 2.5kg weight
- Large capacity rebate of 25mm depth
- Lightweight design for user control
- TCT replaceable blades
- Comfortable “D” handle
- 3mm maximum pass
- Rigid alloy base
- High power 620 watt motor
- Ergonomic design for better
operation
- Robust aluminium cover & inner
cover
- Class-top low noise 76db
- High power 620 watt motor
- Ergonomic design for better
operation
- Robust aluminium cover & inner
cover
- Class-top low noise 76db
- Simple, tool-less, one handed blade
changes
- Comfortable, ergonomic soft moulded
grip
- Top of class 1,050 watt industrial motor
- Higher cutting speed with swing action
- Push button adjustable shoe
- Variable speed control
- Speed selection dial for versatile
operation
- Comfortable dual moulded front cover
- Comfortable rubber moulded handle
- Tool-less blade change mechanism
- Large variable speed trigger
- Powerful 1,010 watt motor
“Out Perform - Out Last”
Screwdriver Vacuum cleaner
W8VB2
Screwdriver
RP30Y
Vacuum
CN16SA
Nibbler
CE16SA
Shear
RB40VA
Blower
VB16Y
16mm Rebar Cutter / Bender
EC12
Air Compressor (Twin Tank)
EC10SB(SL)
Air Compressor (oil-less)
NR90AD
90mm D Head Strip Nailer
NT65MA2
DA Series Brad Nailer
NV65AF3
Coil Nailer
Others
Pneumatics
Nibbler Shear
- High power 620 watt motor
- Ergonomic design for better
operation
- Robust aluminium cover & inner
cover
- Class-top low noise 76db
- Small,l compact & portable
- Low maintenance
- 15.1 Litre tank capacity
- Rubber suction pads for stability in
transport
- Supplied with Nitto Coupling
- Oil-free compressor
- Small, compact & portable
- Low maintenance
- 15.1 Litre tank capacity
- Powerful motor with a 2HP single phase
240v motor
- Grab handle is easy to carry for mobility
- Supplied with Nitto Couping
- Revolutionary on board air duster
- 360 degree adjustable exhaust
- Lightweight and high power
- Tool-less depth adjustment
- Dual function trigger
- Quick clear feature
- Light, compact and powerful
- Wire or plastic collated nails
- Sequential or contact fire
- Dial depth adjustment
- Clear view magazine with adjustable
nail support
- Non-slip grip handle
“Ensure Optimum Performance”
“Use HITACHI Designed
Collated Fastener”
FULL RANGE OF NAILS ALSO AVAILABLE
- Revolutionary Lightweight & compact
design
- Well balanced clip head nailer
- Rear load magazine with by pass
follower
- Tool-less depth adjustment
- Dual function trigger (bump/single shot)
- Moulded rubber grip for comfortable handling
- Automatic switch outlet for ease of use
- Suitable for wet & dry operation
- Durable stainless steel casing
- Heavy duty 1,200 watt motor
- Integrated accessory stands
- Large guard for protection from
sharp metal waste
- Fast efficient cutting speed of
3,700 strokes per minute
- Compact body and lightweight
- Powerful 400 watt motor
- Large cutting capacity: 1.6mm steel, 1.2mm stainless
- Fast efficient cutting sped of 1,500
strokes per minute
- Downward punching allows clear view
of line
- Powerful 480 watt motor
- Adjustable cutting positions for cutting
left or right
- Large cutting capacity: 1.6mm steel, 1.2mm stainless
- Compact and lightweight
- Soft grip handle for easier handling
- Variable speed control trigger switch
- Stable floorstanding operation is possible
- Dust can be collected when using dust bag
- Number one in it’s class with maximum
air volume:3.8
3
/min
- Micro-processor controls secures and
stabilises the bending angle of the steel rod
- Built-in slip clutch for protection of the
mechanism
- Preset dial for bending angles:
45
O
, 90
O
, 135
O
& 180
O
- Soft touch handle for comfort and control
- Bending capacity: 10-16mm / Cutting capacity: 10-16mm
3612 12.7mm Plunge Router
A tough, powerful and robust router
• Handles anything from MDF to red
gum and iron bark
• Shaft lock for easy bit changes
• 3-way preset plunge depth stop
• Low noise (84db)
3706 Cutout Tool
• Designed to help you cut quick,
accurate and smooth curves or holes
• Fits in the palm of your hand giving
you comfortable accurate control
Tool-less depth adjustment sets the
desired cutting depth quickly and
easily
• Clean cuts with optional extraction
head
3901 Plate Joiner
• 6 depth settings for #0, #10, #20
biscuits
A professional joiner with precision
grooving, flat dowel joints and wall/
ceiling capabilities
The base is set up to work with 19mm
material without adjustment
• Optional 110mm 24t blade will give
you 25mm depth of cut
4131 185mm Cold Metal Cutting Saw
• Fast, effortless cutting through metal
with burr-free cuts that are cool to
touch
Virtually spark free cuts
• Cuts up to 6mm thick mild steel
• Quick release blade guard lever for
plunge cutting
• Stainless steel base plate for stability
and durability
• Excellent for roof and fence sheeting
446L Dust Extraction System
• 27 litre tank
• New “Push & Go” filter cleaning
system
• Dual purpose machine easily converts
from dust extraction to a powerful wet
or dry industrial vacuum cleaner
Automatic on/off system operates
simultaneously as connected tool is
switched on
447L Dust Extraction System
• 46 litre tank
• New “Extreme Clean” automatic filter
cleaning system
• Dual purpose machine easily converts
from dust extraction to a powerful wet
or dry vacuum cleaner
Automatic on/off system operates
simultaneously as connected tool is
switched on
6408 10mm Electric Drill
• Lightweight and powerful this drill is a
must for carpenter/joiners, shop fitters
and cabinet makers
Variable speed with forward/
reverse for easy drilling and driving
applications
• Heavy duty 10mm keyless chuck
• Compact design for working in
confined areas
6501 6.5mm High Speed Electric Drill
• Fast rpm (4,500) makes this ideal for
drilling pop rivets and pilot holes in
metal channel
Adjustable depth guide allows you to
drill to a predetermined depth
All ball and needle bearing
construction for longer tool life
• Compact pistol grip design
6821 Drywall Screwdriver
• ”Sure-Lock” adjustment for consistent
screw depth setting
• Low noise level for quieter operation
• Nose piece is easy to remove for
reversing screws out
• Highest power-to-weight ratio on the
market
• Large recessed lock-on button for
continuous operation also helps
prevent accidental lock-on
6825 Drywall Screwdriver
The fastest drywall driver on the
market at 6,000rpm
• ”Sure-Lock” adjustment for consistent
screw depth setting
• Lightweight design (1.4kg) reduces
operator fatigue during extended use
• Large recessed lock-on button for
continuous operation also helps
prevent accidental lock-on
6826 Screwdriver
• State of the art in general fixing
applications with silent clutch for
speed and torque
• ”Sure-Lock” adjustment for consistent
screw depth setting
• Variable speed
• Large recessed lock-on button for
continuous operation also helps
prevent accidental lock-on
6827 Screwdriver
• 6 stage externally adjustable torque
sensitive clutch mechanism
• ”Sure-Lock” depth adjustment for
consistent screw depth setting
• Lightweight cast aluminium gear
housing for durability
• Retractable belt clip
• Conveniently located forward/reverse
switch
Page 28 United Tools National Catalogue 2006
6952 Impact Screwdriver
This impact screwdriver delivers
120 Nm of torque
• Rev speed of 3,200rpm means
increased work efficiency
• Lightweight cast aluminium gear
housing for durability
2414NB-2 355mm Portable Cut Off
• Lock off button to prevent accidental
starting
• Guide plate adjusts 45° right and
left at 3 locations for various sizes of
materials
• Quick release vise for secure stock
retention and fast repeated cut offs
Adjustable depth stop
• Includes 5 abrasive discs and cap
2704 Table Saw
• Machined saw table with high rigidity
delivers accurate cutting work
• Powerful motor enables ripping 4 x 8”
wood with telescopic sub-table
• Rip fence with very smooth sliding
movement with anti-lifting T shaped
rail
• Side and rear extension tables
available as option
3612C 12mm Electronic Plunge Router
• Dial up variable speed
• Soft start feature for smoother start
ups and electronic brake
• Electronic speed control maintains
constant speed even under load
• Optional dust extraction assembly
3620 8mm Plunge Router
• Great router for all round performance,
plunging and template work
• Comfortable grips with the switch built
in for precise and accurate control
• 1,000 Watt motor gives this machine
plenty of power
• 3 way preset plunge depths
• Easy guide adjustment setup
3707F 6.35mm Trimmer
• Ergonomic slim body design for su-
perior handling and reduced operator
fatigue
• Rubber roller for easy and precise
depth adjustment and cam action
locking
• Built-in Maklite for easy trimming
when lighting is inadequate!
4101RH 110mm Wet Cutter
• Perfect saw for cutting tiles, bricks
and concrete
• Powerful and durable motor for
longer life
• Equipped with earth leakage breaker
• Special cover design prevents water
from entering into motor housing
• Cutting capacity up to 34mm with
standard 110mm blade
4107RH 180mm Wet Cutter
Wet cutting capability and a powerful
1,400W motor allows quick and clean
cutting of stone, concrete and asphalt
• Waterproof construction
• Equipped with earth leakage breaker
4112 305mm Portable Angle Cutter
• SJS mechanism delivers outstanding
performance and durability
• Detachable and adjustable solid metal
base plate ideal for cutting 100mm
in depth
• Large dead man switch for safer
operation and less fatigue
• Dust exhaust shute
Tool-less adjustable wheel guard
AF633 Pneumatic Brad Nailer
• Durable and lightweight die cast
housing
• Easy tail loading of nails and easy dial
depth adjustment
• Comfortable rubber grip
• Large magazine capacity - 120 pcs
Available in collation 34°
AN611 Coil Nailer
• 3 way firing switch; safety lock,
bounce fire and standard single fire
Tool-less fine depth adjustment for
recessing heads or raised
• 360° rotational exhaust port to deflect
air away from operator
• Spiked nose cone firmly grips material
while skew or toe nailing
Accepts plastic and wire collated nails
AN942 Pneumatic Framing Nailer
• 3 way firing switch; safety lock,
bounce fire and standard single fire
Tool-less fine depth adjustment for
recessing heads or raised
• 360° rotational exhaust port to deflect
air away from operator
• Spiked nose cone firmly grips material
while skew or toe nailing
Accepts plastic and wire collated nails
United Tools National Catalogue 2006 Page 29
6260DWLE 9.6V 10mm Mobile Driver Drill
• Perfect for fitting door furniture,
kitchen cupboard work, joinery and
general fitout jobs
• 2 speed gear box let’s you choose
between speed and power
• 16 torque settings for precise screw
depth setting, prevents driving of
screws deeper than surface
• Includes 2 x batteries, case and torch
6270DWLE 12V 10mm Mobile Driver Drill
• Perfect for fitting door furniture,
kitchen cupboard work, joinery and
general fitout jobs
• 2 speed gear box let’s you choose
between speed and power
• 16 torque settings for precise screw
depth setting, prevents driving of
screws deeper than surface
• Includes 2 x batteries, case and torch
6280DWLE 14.4V 10mm Mobile Driver Drill
• Perfect for fitting door furniture,
kitchen cupboard work, joinery and
general fitout jobs
• 2 speed gear box let’s you choose
between speed and power
• 16 torque settings for precise screw
depth setting, prevents driving of
screws deeper than surface
• Includes 2 x batteries, case and torch
8414DWAE 12V 13mm Hammer Driver Drill
The newly redesigned clutch lock
out lever lets you to switch between
hammer drill, drill and drive modes
without losing your clutch setting
• State-of-the-art two piece ND-31
Makita motor
• Clutch lock system
• Single sleeve keyless chuck
8434DWAE 14.4V 13mm Hammer Driver Drill
The newly redesigned clutch lock out
lever lets you to switch between ham-
mer drill, drill and drive modes without
losing your clutch setting
• State-of-the-art two piece ND-31
Makita motor
• Clutch lock system
• Single sleeve keyless chuck
8444DWAE 18V 13mm Hammer Driver Drill
The newly redesigned clutch lock out
lever lets you to switch between ham-
mer drill, drill and drive modes without
losing your clutch setting
• State-of-the-art two piece ND-31
Makita motor
• Clutch lock system
• Single sleeve keyless chuck
Option 3. The Combo
When you want more power, Combos are the ideal
shortcut. You can grab all the essential tools for
your new mobile voltage, boxed (or bagged) up with
batteries and a charger. You save because you’re
not buying all the tools individually, and you’re not
paying for more batteries and chargers than you
really need.
Option 1. The Skins
If you’re well set up with a particular
Makita Mobile voltage platform,
you may own enough batteries and
chargers already. And that’s when you
have the option to just grab a Skin. It’s
just your new tool. So you can save
because you’re not paying for more
batteries and another charger.
Option 2. The Kit
You’re on familiar ground here… Each kit
gives you a new tool, packaged up with
batteries and a charger in a self-contained
set.
The future is now.
Battery-powered tool technology has come a long way in the last few
years – and Makita Mobile is definitely the future. Now, mobile tools
can develop
tons of power, run for longer and recharge in less time.
There’s also more choice. With the Makita Mobile range of technology
and voltage platforms, you can pick the perfect balance of tool power,
size and weight to suit your work.
Page 30 United Tools National Catalogue 2006
6980FDWAE 12V Mobile Impact Driver
• Externally accessible replaceable
carbon brushes
• Soft fitting rubber clad palm grip
• Fully recessed screws in the hammer
casing
The brilliant LED Maklite will make
fitting screws under stairs or inside a
cabinet a breeze
BDF460WAE 24V 13mm Mobile Driver Drill
• Replaceable brushes extends motor
life by up to 5 times
Variable speed plus reverse
• 2 speed gear box
• Heavy duty keyless chuck
• Electric brake for accurate driving
• 16 torque settings for precise screw
depth
BHP460WAE 24V 13mm Hammer Driver Drill
• 3 mode dial for hammer, driver and
drill action
• Replaceable brushes extends motor
life by up to 5 times
Variable speed plus reverse
• 2 speed gear box
• Electric brake for accurate driving
• 16 torque settings for precise screw
depth
BHR200SJE 24V 20mm Rotary Hammer
• Great tool for hard drilling applications
where you don’t want to drag a lead
around
• Intelligent charging system for efficient
charging and increased battery life
• 3 mode rotation only, rotation with
hammer and hammer only
• Centre line balance
Variable speed with reverse
• Electric brake
DK1840AL3 18V 4 Piece Mobile System
System includes:
• 8444D MXT Hammer Driver Drill
• JR180D Recipro Saw
• 5620D Circular Saw
• ML180 Swivel Head Torch
• 3 x 2.0Ah Ni-Cd Batteries
• Charger
DK1842AL3 18V 4 Piece Mobile System
System includes:
• 8444D MXT Hammer Driver Drill
• JR180D Recipro Saw
• 5620D Circular Saw
• ML180 Swivel Head Torch
• 3 x 2.0Ah Ni-Cd Batteries
• Charger
6319DWAE 12V 13mm Mobile Driver Drill
• 13mm single sleeve keyless chuck
Wrap around rubber handles for all
day comfort and control
• 16 torque settings
Variable speed and forward/reverse
switch
6339DWAE 14.4V 13mm Mobile Driver Drill
• 13mm single sleeve keyless chuck
Wrap around rubber handles for all
day comfort and control
• 16 torque settings
Variable speed and forward/reverse
switch
6349DWAE 18V 13mm Mobile Driver Drill
• 13mm single sleeve keyless chuck
Wrap around rubber handles for all
day comfort and control
• 16 torque settings
Variable speed and forward/reverse
switch
6835DWAE 12V Mobile Screwdriver
Auto feed screwdriving
• Easy 3 stage screw adjustment range
from 25mm to 41mm screws
• Newly designed narrow housing
allows driving 15mm from internal
right angle walls (corners)
• Fast loading and unloading screw
system with screw strips holding 50
screws
6934FDWAE 14.4V Mobile Impact Wrench
• Lightweight and compact body for
superior handling
• Powerful 120Nm of torque to take on
the toughest jobs
The clever Maklite located at the head
of the tool will provide bright white
light right into where you are working,
lighting up even the darkest corners
6935FDWAE 14.4V Mobile Impact Driver
• Externally accessible replaceable
carbon brushes
• Fully recessed screws in the hammer
casing
The brilliant LED Maklite will make
fitting screws under stairs or inside a
cabinet a breeze
• Forward/reverse with variable speed
• Rubber clad handle
• 2 piece motor
United Tools National Catalogue 2006 Page 31
DK1860AL3 18V 6 Piece Mobile System
System includes:
• 8444D MXT Hammer Driver Drill
• JR180D Recipro Saw
• 5620D Circular Saw
• 4334D Jigsaw
• UB181D Blower
• ML181 Swivel Head Radio Torch
• 3 x 2.0Ah Ni-Cd Batteries
• Charger
DK1861AL3 18V 6 Piece Mobile System
System includes:
• 8444D MXT Hammer Driver Drill
• JR180D Recipro Saw
• 5620D Circular Saw
• 4334D Jigsaw
• UB181D Blower
• ML181 Swivel Head Radio Torch
• 3 x 2.0Ah Ni-Cd Batteries
• Charger
9059K-2 230mm Angle Grinder
• Power packed tool with torque limiter
• Deadman switch for user safety
• Rotatable solid alloy gear housing
• Dust proof bearings and resin coating
on critical parts improves durability
Automatic cut out brushes
• Includes 3 x grinding discs, case and
cap
9069SP Medium Industrial Angle Grinder
• Large dead man switch for user safety
• Compact low profile gear housing
great for working in tight areas
• Gear housing can be rotated to
suit different cutting and grinding
operations
• Dust proof bearings and resin coating
on critical parts improve durability
Adjustable wheel guard
9207SPB 180mm 2 Speed Sander Polisher
• Perfect addition for automotive repairs
and general sanding work
• 2 speed to allow for use as a sander or
a polisher
All ball bearing construction for long
life and smooth operation
• Reversible side handle to suit
operators preference
• Cast alloy gear housing for durability
9227CB 180mm Sander Polisher
• Electronic speed control maintains
constant speed under load, critical for
a professional finish
• Perfect for clear coat finishes
Variable speed with preset stepped
speed dial, ideal for ultra slow
polishing
• Hook and loop base for wool bonnet
N5900B-2 2000W 235mm Circular Saw
• Fine gears and bearings tolerances for
quieter, more accurate running
• Repositioned fan vent, to blow the
cutting line clean
• Cutting window, to give you a clear
view of your line and the blade
• Great balance and standard base
dimensions to fit your old workbench
• Includes cap and extra blade
5007NB-2 185mm Circular Saw
• Heavy duty 1,500W motor
Thickened gauge, fully calibrated
aluminium base for excellent stability
and accuracy
• Durable and robust design with all
needle and ball bearing construction
for long tool life
• Excellent saws for ripping and
crosscut, in the workshop or onsite
• Includes blades, tool bag and cap
5057KB 185mm Dustless Circular Saw
• Dust collection container captures
waste for a clean work environment or
can be connected to a dust extraction
system
• Standard blade cuts 4-6mm exterior
fibre cement sheet cladding
• Bevel cuts 0°-45° enabling a wide
variety of cuts
• Fully enclosed upper guard
5740NBSP 185mm Circular Saw
Thin kerf blade cuts through all grades
of timber even hardwoods
• Improved handle design gives great
balance
• Bevel lock to 45º
• Calibrated aluminium base for
increased accuracy
• Includes extra Makedge blade
5902B 235mm Circular Saw
• 2,100W motor
• Hardworking saw with the power to
rip through most timbers
Tight gear tolerances minimise arbor
float and noise
• Easy to use height adjustment lock
lever
• Front and rear bevel locks
• Improved handle design
N3701 6.35mm Trimmer
• Ideal for trimming laminates, edging,
freehand and template design work
• Clear base plate allows you to perform
precise cutting for a perfect finish
• Robust and durable aluminium
housing
Page 32 United Tools National Catalogue 2006
9553NBK 710W 100mm Angle Grinder
• 710W motor
• Ideal for domestic or light industrial
use
• Durable motor with patented zigzag
varnish and resin coating on critical
parts increases tool reliability
• Includes 6 grinding discs and case
9555NBK 710W 125mm Angle Grinder
• 710W motor
• Ideal for domestic or light industrial
use
• Durable motor with patented zigzag
varnish and resin coating on critical
parts increases tool reliability
• Includes 5 x grinding discs and case
9556NB 100mm Angle Grinder
• Powerful 840W motor
• Durable motor with patented zigzag
varnish and resin coat on critical parts
increases tool reliability
• 90° left and right head rotation
• Side switch conveniently located
• Side handle can be used in left or right
handed position
• Shaft lock for easy wheel changes
9557NB 115mm Angle Grinder
• Powerful 840W motor
• Durable motor with patented zigzag
varnish and resin coat on critical parts
increases tool reliability
• 90° left and right head rotation
• Side switch conveniently located
• Side handle can be used in left or right
handed position
• Shaft lock for easy wheel changes
9558NB 125mm Angle Grinder
• Powerful 840W motor
• Durable motor with patented zigzag
varnish and resin coat on critical parts
increases tool reliability
• 90° left and right head rotation
• Side switch conveniently located
• Side handle can be used in left or right
handed position
• Shaft lock for easy wheel changes
9564C 115mm Angle Grinder
• SJS mechanism delivers outstanding
performance and durability
• Electronic limiter prevents accidental
motor overload and burnout
• Dust proof bearings, zigzag and resin
coated on critical parts
• Slim body design for comfortable grip
and control
• Shaft lock for easy wheel changes
• Solid aluminium gear housing
9565C 125mm Angle Grinder
• SJS mechanism delivers outstanding
performance and durability
• Electronic limiter prevents accidental
motor overload and burnout
• Dust proof bearings, zigzag and resin
coated on critical parts
• Slim body design for comfortable grip
and control
• Shaft lock for easy wheel changes
• Solid aluminium gear housing
9565CN 125mm Angle Grinder
• Deadman switch
• Super Joint System (SJS) delivers
outstanding performance and
durability
• Electronic limiter prevents accidental
motor overload and burnout
• Dust Proof Bearings, zigzag varnish
and resin coated on critical parts to
improve durability
9565CV 125mm Angle Grinder
• Dial up variable speed for precise
speed control
• Super Joint System (SJS) delivers
outstanding performance and
durability
• Electronic limiter prevents accidental
motor overload and burnout
• Dust Proof Bearings, zigzag varnish
and resin coated on critical parts to
improve durability
SJS is a massive advance
in power, safety and
durability.
The design gives
maximum transfer of
power and torque, while
minimising the wear and
tear that happens with
older technology.
Plus it disengages under extreme loads, protecting the
user and the machine.
...and it’s only inside Makita high powered angle grinders.
SJS is an advanced drive system, based on a
coil spring which wraps around the internal
drive spindle.
On start-up, the coil tightens around the spindle
to produce smooth, direct and highly efficient
drive from the motor to the grinder disc.
If the grinder ‘grabs’ or overloads the motor,
the SJS is instantly disengaged by the reversed
force and the drive spindle rotates freely.
United Tools National Catalogue 2006 Page 33
BO3700SP 1/3 Sheet Finishing Sander
• Powerful and lightweight for coarse
sanding of stock, through to fine
finishing and preparation for paint or
lacquer
• Highly efficient through the pad dust
collection with removable dust bag or
connect to dust extraction system
• Improved base system reduces
vibration
• Includes 9 abrasive sheets and punch
plate
BO4553 1/4 Sheet Palm Sander
• Ideal for close edge work
• Dust bag for clean and efficient
sanding and can connect to dust
extraction system
All ball bearing construction for
smooth operation
• Palm grip design for comfort and
control
BO4561 Triangular Base Palm Sander
• Precision sanding action for confined
areas
• Perfect for sanding louver doors,
windows or any hard to reach areas
• Highly efficient through the pad dust
collection with dust bag or can be
connected to dust extraction system
• Fast and smooth operating action
BO4900V 1/2 Sheet Finishing Sander
• Integrated through the pad dust
control with paper waste bags or
connect to dust extraction system
• Dial up electronic variable speed
control
• Hook and loop base pad that suits all
common papers
• Reduced vibration for the operator
with Makita’s unique counter
balancing system
BO5021 125mm Random Orbital Sander
• Sure grip hook and loop base provides
quick paper changes
• Dial up variable speed
Very low vibration
Through the pad dust extraction
• Connects directly to dust extraction
system or dust bag
• Detachable front handle for working in
confined areas
BO6030 150mm Random Orbital Sander
Variable speed control
• Efficient through the pad dust
extraction for a cleaner working
environment
• 3mm orbit diameter provides a swirl
free finish
• Ergonomic rubber clad rear handle
• Connects directly to dust extraction
system or dust bag
BO6040 150mm Random Orbital Sander
• Dual mode selector for ‘random orbit’
action (finishing) and ‘random orbit
with rotation’ action (coarse and
polishing)
Variable speed control
Very low vibration
• Recommend this sander to be
connected to dust extraction system
9910SP 76mm Belt Sander
• Ideal for stripping back paintwork on
weatherboards, furniture, etc
Auto tracking system constantly keeps
the belt centred
• Compact body design makes it ideal
for flush finishing
• Efficient built in dust extraction system
with bag provided or connects directly
to dust extraction system
9924DB 76mm Belt Sander
This sander has the versatility to use
both 76mm and 100x610mm belts
• Excellent for floor sanding, cleaning
and smoothing off table and bench
tops and can be connected to dust
extraction system
• Fine adjustment tracking
• Large lever for quick belt changes
• Graphite pad for reduced belt wear
and reduced heat in the sanding area
9032 6mm, 9mm, 13mm Belt Sander
The perfect sander for filing out
housings or delicate work
• Head adjustment 110° for easy
handling
Variable speed control
• Can be connected to dust extraction
system
• Low profile belt head, 14mm
• Optional 6mm and 12mm arms and
belts available
9403 100mm Belt Sander
• Excellent for floor sanding, cleaning
and smoothing off table and bench
tops
• Extremely powerful and robust
A fast belt speed of 500m/min so it
will rip through any timber quickly and
efficiently
Takes standard size belts 100 x 610mm
for convenience
1902SP 82mm Planer
A sturdy, robust planer for all trade
applications
• Powerful 580W motor
• Standard mini reversible TCT blades
that provide a razor sharp long
cutting life
V-groove chamfering guide 9mm fixed
rebate capability
• Includes a set of blades
Page 34 United Tools National Catalogue 2006
DA3010F 10mm Angle Drill
• Ideal for close quarter or right angle
drilling or driving
• Paddle switch for easy one handed
operation
Variable speed (0-1,400) for controlled
drilling
• Handy Maklite feature lights up those
dimly lit work areas
• Forward/reverse action
DA3011F 10mm Angle Drill
• Ideal for close quarter or right angle
drilling or driving
• Paddle switch for easy one handed
operation
Variable speed (0-1,400) for controlled
drilling
• Handy Maklite feature lights up those
dimly lit work areas
• Forward/reverse action
DP4001K 13mm Drill
Aluminium gear housing for durability
and longer tool life
• Large variable speed trigger with
forward/reverse action
• Lock-on lever allows the drill to be
locked at max. rpm with the flick of
a lever
• Side handle swivels 360° for
convenient operation
DP4003K 13mm Drill
Aluminium gear housing for durability
and longer tool life
• Large variable speed trigger with
forward/reverse action
• Lock-on lever allows the drill to be
locked at max. rpm with the flick of
a lever
• Side handle swivels 360° for
convenient operation
GB600 150mm Bench Grinder
• Ideal for the home workshop
• Complete with protective shields and
tool rests
• 150mm 180W bench grinder
• 2.0 Amp 1/3Hp
GB601 150mm Bench Grinder
• Ideal for the home workshop
• Complete with protective shields and
tool rests
• 150mm 240W bench grinder
• 2.5 Amp 1/2Hp
GB800 205mm Bench Grinder
• Check out this 540W machine which is
perfect for light industrial applications
• Complete with protective shields and
tool rests
• 4 Amp and 3/4Hp
HG1100 Heat Gun
• 2,000W of flameless heat
Variable temperature control
100° -600°C
• 2 speed blower fan
• Perfect for stripping paint, varnish and
many other applications
• Ceramic core protects the heating
element, ensures a longer working life
4323 Jigsaw
• Powerful 400W motor
• Smooth and quiet cutting with
anti-vibration
• Comfortable D-handle design
Adjustable speed dial for greater
accuracy for a wider range of
applications
• Bevel cuts to 45° left or right
• Can be connected to dust extraction
system
4340CT Jigsaw
• Powerful 720W motor
Variable speed control with constant
speed electronics
• 3 mode oscillating feature allows
faster cutting
Accepts bayonet shank blades
Adjustable aluminium base for bevel
cutting
• Ergonomic design D-handle
4341CT Jigsaw
• Powerful 720W motor
Variable speed control with constant
speed electronics
• Extremely low vibration
• 3 mode oscillating feature allows
faster cutting
• Built in dust blower
Tilting base that cuts up to 45°
• Barrel handle design
HG1100KIT Heat Gun Kit
• 2,000W of flameless heat
Variable temperature control
100° -600°C
• 2 speed blower fan
• Perfect for stripping paint, varnish and
many other applications
• Ceramic core protects the heating
element, ensures a longer working life
United Tools National Catalogue 2006 Page 35
HL500 Heat Gun
• Great for general purpose work
• 1,500W of flameless heat
• 2 temperature ranges
• 2 air speed settings
• Ceramic core protects the heating
element – ensures a longer working
life
• Unique body design allows the gun to
stand upright for no hands operation
HM1304 Demolition Breaker
• Powerful 1,500W motor
Accepts 30mm hexagonal bits
• Convenient lock-on button for
continuous operation
• Secure locking bit system
• Internal ‘O’ ring fits around the end of
the bit to ensure damaging masonry
dust is kept out of the cylinder
HP1620KSP 13mm Hammer Drill
• Extremely light, compact and a
powerful 650W motor
The reversing system ensures full
power in both forward and reverse
• Large trigger switch for easy operation
• Ergonomic in-line design for maximum
power, control and comfort
• Side handle swivels 360°
• Includes 9 piece bit set and case
HP1621KSP 13mm Hammer Drill
• Extremely light, compact and a
powerful 650W
The reversing system ensures full
power in both forward and reverse
• Large trigger switch for easy operation
• Ergonomic in-line design for maximum
power, control and comfort
• Keyless chuck
• Includes 9 piece bit set and case
HP2051 20mm 2 Speed Hammer Drill
These power packed hammer drills
will take on the most demanding jobs
with ease
• Built in torque limiter reduces risk of
damage to the drill and operator if the
bit jams
• 2 speed gearbox with forward/reverse
• Keyless chuck
HP2071F 20mm 2 Speed Hammer Drill
• Super powerful 1,010W motor
• 2 speed mechanical gearbox
Variable speed trigger and electronic
speed adjusting dial
A torque limiter to protect you and the
tool from damage
• Built-in Maklite casts a light onto
the drilling area when lighting is
inadequate
HR2020 20mm Rotary Hammer
• 2 mode operation rotary hammer in
masonry, standard drilling in other
materials (optional chuck adaptor and
chuck)
• Positive slide lock chuck accepts all
SDS type bits
Variable speed with reverse
Torque limiter to protect the tool and
operator if the bit should jam
HR2450 24mm Rotary Hammer
• 2.7 joules
Versatile 3 mode operation for rotary
hammer, hammer only in masonry,
standard drilling in other materials
(optional chuck adaptor)
• Chuck accepts all SDS type bits
Variable speed with reverse
HR2450FT 24mm Rotary Hammer
• 2.7 joules
Versatile 3 mode operation for rotary
hammer, hammer only in masonry,
standard drilling in other materials
(optional chuck adaptor)
• Chuck accepts all SDS type bits
• HR2450FT comes standard with SDS
chuck and keyless drill chuck
• Maklite built into the handle casts
light directly onto the work area
HR3000C 30mm Rotary Hammer
• 5.3 joules per impact
• 3 mode dial selects hammer, drill or
hammer drill
Variable speed control dial
Auto cut out brushes and service
indicator light minimises down time
and maximises motor life
HR4000C 40mm Rotary Hammer
• Electronic variable speed control dial
• Soft start electronic switch
Automatic cut out brushes with service
indicator light and torque limiter
• 2 mode operation – rotation with
hammer and hammer only
• D-handle for chiselling and straight
handle for drilling
HR5001C 50mm Rotary Hammer
• Power packed to handle drill bits
up to 50mm diameter with 2 mode
operation – rotation with hammer and
hammer only
• Electronic soft start with a large 3
finger trigger to reduce fatigue during
prolonged work
Automatic cut out brushes with service
indicator light and torque limiter
Page 36 United Tools National Catalogue 2006
HK0500 Power Scraper
• Powerful 550W motor with 2,000–
3,500bpm for maximum performance
• 12 position bit adjustment
Variable speed control dial
• Large and comfortable trigger switch
• One touch sliding chuck for easy bit
installation and removal
HK1810 Power Scraper
• For light scraping, chiselling and
chipping; ideal for remodelling or
renovation work
Air cushion hammering for long tool
life
• Quick change bit retainer
Automatic cut out brushes
All ball bearing construction for longer
tool life
Variable speed
HM0860C Demolition Hammer
• Full wave electronic variable speed
and power control
• 12 joules per impact power
• Spade or chisel can be locked into
12 different positions
Automatic cut out brushes
Warning indicator light lets you know
when the tool requires servicing
HM1100C Demolition Hammer
• Powerful 1050 watt motor
• 16 angle settings for chisel bits
Rubber cladded rear and side handle
for reduced vibration
Automatic brush cut-out system
• Soft start feature
• Service indicator lamp
• Hammer idling mode
• Slide on and off switch
HM1202C Demolition Hammer
• Large capacity SDS Max demolition
hammer for speed, durability and
comfort
• Electronic speed adjusting dial
• Powerful 1,450W motor to handle the
most demanding jobs
• 12 angle settings for bit position
Automatic cut out brushes with service
indicator light
HM1304 Demolition Breaker
• Powerful 1,500W motor
Accepts 30mm hexagonal bits
• Lock-on button for continuous
operation
• Secure locking bit system
• Internal ‘O’ ring fits around the end of
the bit to ensure damaging masonry
dust is kept out of the cylinder
HM1400 Electric Breaker
• Hard hitting reliability in a comfortable
T-grip design
Air cushioned system prevents
excessive vibration and allows greater
operator comfort
Automatic cut out brushes
• 30mm hexagonal bit shank
Auto idle will only hammer when the
bit is in contact with the material
HM1810 Electric Breaker
• Lowest vibration in its class
AVT counter weight mechanism helps
to reduce vibration
Auto cut-off brushes
Warning light indicates trouble with
cord
• 28.6mm Hex shank
JN1601 1.6mm Nibbler
• Clean and precise work in keystone
plate, deck plate and other corrugated
sheet materials
• Die rotates 360°
• Ergonomic, slim body design for easy
gripping
• Lock on sliding switch for continuous
use
• Built-in thickness gauge for
convenience
JN3200 3.2mm Nibbler
• Built-in thickness gauge for
convenience
• Easy punch and die replacement for
less down time
• Powerful 820W motor allows cuts
through 3.2mm mild steel
• Cutting line and blade action easily
visible
JR3050T Recipro Saw
A huge new 1,010W motor
• Strokes-per-minute have been
increased by almost 20%
• Minimal vibration
A bigger variable speed trigger with
lock-on button
• Push in tool-less blade change system
with quick release
JR3070CT Recipro Saw
• Featuring AVT counter weight
mechanism which helps reduce
vibration
• Preset dial for speed control for
optimal stroke speed for application
United Tools National Catalogue 2006 Page 37
JS1300 1.3mm Straight Shears
• 360° swivel shear head for increased
manoeuvrability
• Large variable speed trigger for
controlled cutting speed
• Brushes are easily accessible for fast
replacement
• Lock on button for continuous
operation
JS1600 1.6mm Shears
• Blade design results in no material loss
• Body grip design with a paddle switch
for easy one handed operation
A lock off switch prevents accident
starting
• Built-in thickness gauge for
convenience
JS1660 1.6mm Straight Shears
• Ideal for straight cutting
• Mar-free model has a stepped
blade, shims for blade adjustment to
minimise burrs
JS1670 1.0mm Straight Shears
• Cuts close curves, right or left, in
30mm radius mild or stainless steel
Visible cutting line
• Continuous metal curl in one direction
for easier operation
JS3200 3.2mm Shears
• For heavy duty cutting up to 3.2mm
mild steel and 2.5mm stainless steel
• Blades have 4 cutting edges each
• Built-in thickness gauge
• Ball and needle bearing construction
for long tool life
• Highly visible sight line for precise
following of patterns
LC1230 305mm Metal Cutting Saw
• Powerful 1,750W motor
• Lock off button prevents accidental
starting
Tool-less guide plate adjusts 0°-45° for
quick and easy mitre cutting
• Large cast aluminium base for stability
• Externally accessible brushes for easy
maintenance
LS0714 190mm Slide Compound Saw
• Four steel slide arms on linear bearings
move in two stages, to give this
190mm saw a massive 300mm width
of cut
• 1,010W motor
• Bevel cuts up to 45° left or 5° right
perfect when you are undercutting
boards for a super snug fit
LS1013 260mm Slide Compound Saw
• 1,430W motor
• Compound and mitre cuts to 45° left
and right
• Dust extraction to bag or can be
connected to dust extraction system
• Self closing safety blade cover
• Constant speed control, ideal for
cutting into even the hardest timbers
LS1040 260mm Compound Mitre Saw
• Heavy duty 1,650W motor
• Precision machined aluminium base,
with fully calibrated angles
• Bevel cuts 45° left only
• Electric brake
• Removable safety lock button
• Dust extraction to bag or dust
extraction system
LS1214 305mm Slide Compound Mitre Saw
The deepest cutting capacity of any
305mm slide saw on the market,
cutting a huge 115mm deep
• Powerful motor 1,650W
• Precision bevel cutting 45° both left
and right, with positive stop at 33.9°
ideal for crown moulding
• Mitre cutting is a breeze with the base
rotating 52° right and 47° to the left
with positive stops at all common
angles
UT120 Power Mixer
• Dial up variable speed control makes
easy batch mixing and consistency in
materials
• Electronic speed control for soft start
up, constant speed, pre-selectable
speed
Thermal and current overload
protection for long durability
• Full metal gearbox
• Lock on switch
NHP1310 13mm 2 Speed Hammer Drill
• Powerful 600W motor
• Quick action change dial for hammer
and rotation or rotation only
• Ergonomic handle design for comfort
and control
• 2 speed gear selection with variable
speed in both ranges gives you greater
control and accuracy
Page 38 United Tools National Catalogue 2006
SG1250 125mm Wall Chaser
• Ergonomically designed handle for
comfort and control
• Conveniently located front cover
prevents dust from spreading in every
cutting depth
• SJS feature provides smooth and
comfortable cutting by reducing the
start up shock and protection from
accidental wheel jam
• Easy blade change
6906 19mm Impact Wrench
• Powerful 588 Nm of torque
• Rocker type reversing switch for easy
one handed or reverse operation
• Side handle adjusts 360° for
convenient operation
• Externally accessible carbon brushes
for easy maintenance
TW0200 12.7mm square drive Impact Wrench
• High torque of 200Nm
• Efficient impact system with less
vibration and longer tool life
Variable speed switch with slide
through forward/reverse switch
• Convenient tool hook attaches to both
sides of tool
TW0350 12.7mm square drive Impact Wrench
• Incredible high fastening torque of
350Nm
Aluminium hammer case with high
durability
• Cylinder formed housing with high
rigidity and durability
• Efficient impact system with less
vibration and longer tool life
• Forward and Reverse rocker switch
TW1000 25.4mm square drive Impact Wrench
This powerhouse packs 1000Nm of
torque, with it’s lightweight plastic/
glass reinforced housing and handle
• Rubber bumper protection front/rear
and on the base of the handle
• It’s rubberised soft grip makes for a
comfortable tool to work with
So we’re
proud to be
taking the bad
vibes out of Makita
tools, using the same
heavy-duty engineering
techniques that protect
buildings from
earthquakes.
Power tool vibration is getting
a real hammering from OH&S
organisations around the
world… with good reason.
Prolonged exposure to
tool vibration can cause
permanent nerve,
muscle and joint
damage.
7104L Chain Mortiser
• Notches or cuts through-holes in
thick wood stock quickly, cleanly and
accurately
• Portable at only 17kg
• Large adjustable vice for attaching
firmly onto logs
• Ideal for post and rail fencing and door
lock mortising
DPC7311 Petrol Power Cut
• Unique 5 stage air filter system
• Perfectly balanced
• Optimum vibration dampening
• Decompression button for easy
starting
• Quick adjust belt and blade cover
system
• Large volume muffler
• Computer controlled ignition
SC130DRA Mobile Rod Cutter
• Powerful 12V motor ensures a clean
cut into steel rod
• Up to 150 rods (10mm) on a sigle
charge
• Powerful hydraulic cutting with low
vibration
Variable speed trigger
METABO TOOLS FOR THE PROFESSIONAL
METAB
O
'
S3
Y
R
PROFESSIONAL
WARRANTY
Meta
b
o’s XXL Warranty Progra
m
is a 2yr extension o
f
the 1y
r
warranty
f
or customers who
reg
i
ster personal in
ormation
on
l
ine (www.meta
b
o.com/xx
l
)
within
f
our weeks o
f
purchase.
MFE 30
1400 Watt
Wall Chaser
3.5Nm, 125mm diamond cutting blades
• Chase up to 30mm wide and 30mm deep
• Safety Clutch and Deadman Switch
• No tools required with rotating hand grip
• Made in Germany
MFX 65
2500 Watt
Wall Chaser
18Nm of torque for the toughest jobs.
• 7 settings to cut slots or chases 3-41mm wide
• Adjustable depth of cut 20 - 65mm
• Stable, clean cutting with its 4 wide rollers
• Made in Germany
ASA 1202 & MFE 30
Wall Chaser
& Dust Extractor
Combine Metabo’s MFE 30 Wall Chaser
with the ASA 1202 Dust Extractor
• The extractor has a 1200 watt motor with high
suction (248mbar) and 25lt capacity
• Smart power outlet on vacuum
The Metabo S Automatic Safety Clutch has proven its worth in
millions of Metabo grinders. If the tool jams, the automatic safety
clutch instantly slips the gears and reduces torque, preventing
kickback and injury. In addition to protecting you, it also protects
the gearbox and motor, preventing burnout and prolonging the
life of the tool.
Selected Metabo grinders also feature Soft Start, Restart Protection,
Safety Switch and Deadman Switch for your protection.
Metabo's Marathon motor lasts up to 5 times longer than other
powertool motors. Every aspect of its design is geared towards
longer life and exceptional performance. It is a high efficiency,
heat tolerant motor with doubly protected windings, high
performance cooling fan, and patented winding protection grid.
Ideal for builders and tilers
• Lightweight with a narrow body, perfect for
small cutting and grinding jobs
• Plus tile cutting attachment
• Rear-mounted switch protected from dust
GE 700
710 Watt
Electronic Die Grinder
Ideal for engineers, welders and manufacturers
• Perfect balance of weight and power
• Safety clutch protects you from kickback injury
• 'Quick' tool-less disc change saves hassle
• German Made • Anti-Vibration side handle
GE 900 Plus
900 Watt
Electronic Die Grinder
Ideal for heavy engineering and pipe fitting
• 50% more torque than other 5" grinders
• Lightweight with a rotatable, 3-position rear
handle for total control of all that power
• German Made • Anti-Vibration side handle
W 6-100 Combi
650 Watt
100mm Angle Grinder
Ideal for heavy engineering, rigging, foundries
• Metabo's most powerful grinder
• Rotatable hand grip & 3 position side handle
• Spindle lock and adjustable blade guard
• German Made • Anti-Vibration side handle
W 10-125Q
1010 Watt
125mm Angle Grinder
Ideal for heavy engineering, rigging, foundries
• Soft start for smooth start up
• Rotatable hand grip & 3 position side handle
• Spindle lock and adjustable blade guard
• German Made • Anti-Vibration side handle
W 14-125 Ergo
1400 Watt
125mm Angle Grinder
Packed with safety features: soft start, restart
protection, overload cut-out, deadman switch
and Metabo’s unique safety clutch
• ‘Quick’ tool-less disc change
• VTC electronics maintain constant disc speed
W 25-230
2500 Watt
230mm Angle Grinder
WX 23-230Q
2300 Watt
230mm Angle Grinder
• Versatile, multi-purpose die grinder
• Variable speed for grinding and cutting hard
and soft materials (including plastic)
• Spindle lock for easy changing of tools
• Made in Germany
WE 14-150 Plus
1400 Watt
150mm Angle Grinder
• Very high torque grinder for the toughest jobs
• Variable speed for grinding and cutting hard
and soft materials (including plastic)
• Spindle lock for easy changing of tools
• Made in Germany
SAFETY CLUTCH
MARATHON MOTOR
Ideal for rapid and precise cutting of steel,
Non Ferrous metals, iron and cast iron
• Mitre adjustment up to 45 deg
• Cutting capacity: Rolled bars 65mm ø; Pipes
120mm ø; Structural Steel 120 x 130mm
CS 14-15
2100 Watt, 355mm
Cut-off Saw
CODE! Ready
CODE! Ready
CODE! Ready
CODE! Ready
KHE 32
900 Watt, SDS Plus
3 mode Rotary Hammer
KHE 28
1010 Watt, SDS Plus
3 mode Rotary Hammer
BHE 26
750 Watt, SDS Plus
2 mode Rotary Hammer
METABO TOOLS FOR THE PROFESSIONAL
METAB
O
'
S3
Y
R
PROFESSIONAL
WARRANTY
M
eta
b
o’s XXL Warranty Program
is a 2yr extension o
f
the 1y
r
w
arranty
f
or customers who
reg
is
er personal in
ormation
o
n
l
ine (www.meta
b
o.com/xx
l
)
w
ithin
f
our weeks o
f
purchase
.
MHE 95
1500 Watt, SDS Max Demolition Hammer
• SDS Max Chisel • Impacts per minute 1020-2040
• 12 Chisel positions • Single-blow energy 5-25J
• VTC Electronics • Machine weight 9.8kg
MHE 65
1150 Watt
SDS Max Chipping Hammer
KHE 55 | KHE 75
1050 | 1150 Watt
SDS Max Rotary Hammer
• SDS Max Chisel • Impacts per minute 1325-2650
• 8 Chisel positions • Single-blow energy 1-10J
• VTC Electronics • Machine weight 5.7kg
• 40/45mm max drill Ø • 1300-2600 / 1325-2650 impacts per min.
• 8 Chisel positions • 1-9 / 1-10J Single blow energy
• VTC Electronics • Machine weight 5.9 / 6.4kg
Metabo's CODE! immobiliser makes your
powertool useless to potential thieves.
Metabo’s CODE! works with the same ease as
a car immobiliser - you simply program your
remote with a 3-digit code of your choice. Then,
at the push of a button, your Metabo power tool
is immobilised and can’t be operated until re-
activated with your remote. CODE! is a powerful
deterrent to thieves.
IS YOUR TOOL PROTECTED?
CODE! Ready
CODE! Ready
Metabo’s SDS Plus Multihammers are that unique all-round tool
you’ve always wanted. Cruise through concrete quickly and cleanly
and then, with the turn of a knob and a 3 second chuck change, you
can also drill at high or low speed. For chipping or tile removal, it also
has chisel mode.
Ideal for all tradespeople who work with concrete on site
• Hammer, chisel and drill at low speed (with optional keyless chuck)
• Cruise through concrete up to 32mm, wood to 40mm, steel to 18mm
Ideal for all tradespeople who work with concrete on site
• Hammer, chisel and drill at low speed (with optional keyless chuck)
• Cruise through concrete up to 28mm, wood to 40mm, steel to 13mm
Ideal for all tradespeople who work with concrete
• Hammer and drill at low speed (with optional keyless chuck)
• Cruise through concrete up to 26mm, wood to 40mm, steel to 13mm
UHE 28 pictured
Max. Drilling Capacities: 2 speed Chisel CODE!
Concrete Wood Steel gearbox mode Ready
UHE 28 28mm 40mm 16mm 99 9
UHE 22 22mm 30mm 13mm 9 9 -
Hammer, chisel, high-speed drill,
low-speed drill
UHE 22
705 Watt, SDS Plus
UHE 28
1010 Watt, SDS Plus
4 MODE MULTIHAMMERS
BHE 20 Compact
450 Watt, SDS Plus
2 mode Rotary Hammer
Compact design, built tough in Germany and it weighs only 2.6 kg
• Rubber coated handle for comfort • Drills concrete 16mm, wood 20mm
• 2 position Anti-Vibration side handle (not pictured) • Safety Clutch
NEW!
CODE! Ready
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Hitachi WR 16SA S User manual

Category
Power drills
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI