Asco Series 541 542 543 M12 Connection Owner's manual

Type
Owner's manual

Asco Series 541 542 543 M12 Connection

Below you will find brief product information for Asco Series 541 542 543 M12 Connection.

These electro-pneumatic valves with ISO mounting surface in sizes 1 - 2 - 3, with 3-pin electrical connection M12, offer the following advantages:

  • Compact in size (miniature series 302 pilot valve)
  • Lower cost and less time for electrical connection
  • Integrated electrical protection and display
  • Possibility of immediate electrical disconnection

Central electrical connection via M12 connector or classic connection via two size 30 connectors (to ISO4400) is possible.

Asco Series 541 542 543 M12 Connection

Below you will find brief product information for Asco Series 541 542 543 M12 Connection.

These electro-pneumatic valves with ISO mounting surface in sizes 1 - 2 - 3, with 3-pin electrical connection M12, offer the following advantages:

  • Compact in size (miniature series 302 pilot valve)
  • Lower cost and less time for electrical connection
  • Integrated electrical protection and display
  • Possibility of immediate electrical disconnection

Central electrical connection via M12 connector or classic connection via two size 30 connectors (to ISO4400) is possible.

2
3834809
A
B
E
D
C
2
3
4
(14)
(12)
A
E
3
4
F
Bistable
valves
Monostable
valves
Installation
M12 CONNECTION ON ISO 1 - 2 - 3 SPOOL VALVES
Pad mounting ISO 1 - 2 and 3 spool valves with a M12 connector with 3 contacts have the following advantages:
• Small size (miniature series 302 pilot valve)
• Shorter connection time and lower cost
• Built-in electrical display and protection
• Provision for instantaneous electrical disconnection
Centralised electrical connection
by M12 connector
Conventional connection
by two size 30 connectors (to ISO4400)
DISPLAY AND CONNECTION OF M12 CONNECTOR (24V DC only)
A: Operator pilot valve (14)
B: Yellow LED indicating energisation of pilot valve
14 (operator)
C: Return pilot valve (12), bistable or 5/3
D: Yellow LED indicating energisation of pilot valve
12 (return)
E: Bulkhead connector, 3 male contacts, CNOMO
E03.62.520N, for electrical connection of two
pilot valves.
F: Yellow LED indicating energisation of pilot valve.
NOTE: The built-in electrical protection is provided
by bi-directional Transil diodes.
Assignment is as per ISO/CD20401
standard.
Contact Connection
2 = Coil 12
3 = Common (0V)
4 = Coil 14
Monostable spool valves Bistable and 5/3 spool valves
14
4
3
14
4
3
2
12
GB
5
1
3
(14)
(12)
!
For the versions with M12 connector, we recommend using the more compact-sized right-angle
connectors which have a smaller bend radius than a straight connector (reduction of strain).
Catalogue number of right-angle connector: 88130213 (with 5 m cable)
Catalogue number of straight connector: 88130212 (with 5 m cable)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Asco Series 541 542 543 M12 Connection Owner's manual

Type
Owner's manual

Asco Series 541 542 543 M12 Connection

Below you will find brief product information for Asco Series 541 542 543 M12 Connection.

These electro-pneumatic valves with ISO mounting surface in sizes 1 - 2 - 3, with 3-pin electrical connection M12, offer the following advantages:

  • Compact in size (miniature series 302 pilot valve)
  • Lower cost and less time for electrical connection
  • Integrated electrical protection and display
  • Possibility of immediate electrical disconnection

Central electrical connection via M12 connector or classic connection via two size 30 connectors (to ISO4400) is possible.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI