dji DNG Cleaner User guide

Brand: dji

Model: DNG Cleaner

Type: User guide

This manual is also suitable for

Zenmuse Z3

The dji DNG Cleaner is a powerful and user-friendly software tool designed specifically to process and optimize DNG raw images captured by DJI drones and cameras. With its advanced algorithms and intuitive interface, this software provides you with the ability to correct distortion, remove noise, enhance color accuracy, and make other adjustments to produce high-quality images that are ready for professional use.

Page is loading ...

Disclaimer and Warning

Congratulations on purchasing your new DJI

product. The information in this document aects

your safety and your legal rights and responsibilities. Read this entire document carefully to

ensure proper conguration before use. Failure to read and follow instructions and warnings in

this document may result in serious injury to yourself or others, or damage to your DJI product

or damage to other objects in the vicinity. This document and all other collateral documents are

subject to change at the sole discretion of DJI. For up-to-date product information, visit http://www.

dji.com and click on the product page for this product.

DJI is a trademark of SZ DJI Technology Co., Ltd. (abbreviated as “DJI”) and its affiliated

companies. Names of products, brands, etc., appearing in this manual are trademarks or registered

trademarks of their respective owner companies.

Do Not Modify or Alter the Zenmuse Z3

The ZENMUSE

Z3 has been calibrated specically for the designated camera and lens before

leaving the factory. No physical or mechanical modication or adjustment of the gimbal is required

or recommended. Do not add any other component or device (such as a lter, lens hood, etc.) to

the camera.

The Zenmuse Z3 is a delicate instrument. Do not disassemble the gimbal or camera as this will

cause permanent damage.

Be sure to use a DJI approved battery, otherwise performance may be hindered and internal

malfunctions or damage may occur.

Only Use Compatible Aircraft

The Zenmuse Z3 is currently compatible with the following DJI Aircraft: Inspire 1 series, Matrice

100 and Matrice 600. It will also be compatible with designated future products. To optimize the

gimbal’s performance, download the latest DJI GO app, otherwise the Zenmuse Z3 may not

function properly.

Safe Use

Make sure to operate your aircraft in the safest manner possible. Observe the procedures contained

in the user manual and the online tutorials to mount and connect the gimbal to your aircraft.

By using this product, you hereby signify that you have read this disclaimer and warning carefully

and that you understand and agree to abide by the terms and conditions herein. You agree that you

are solely responsible for your own conduct while using this product, and for any consequences

thereof. You agree to use this product only for purposes that are proper and in accordance with all

applicable laws, rules, and regulations, including international and domestic airspace regulations,

and all terms, precautions, practices, policies and guidelines DJI has made and may make

available.

DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from

the use of this product. The user shall observe safe and lawful practices including, but not limited

to, those set forth in the User Manual.

Page is loading ...

Compliance Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Any changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

EU Compliance Statement:

SZ DJI TECHNOLOGY CO., LTD

hereby declares that this device is in compliance

with the essential requirements and other relevant provisions of the EMC Directive.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-

compliance

EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany

Manufactured by:

14th floor, West Wing, Skyworth Semiconductor Design Building

NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen,

Guangdong, China

制

造

商：深圳市大疆创新科技有限公司

地

址：深圳市南山区高新南四道 18 号创维半导体设计大厦西座 14 层

服务热线：400-700-0303

Page is loading ...

www.dji.com/support

DJI Support

DJI 技术支持

DJI 技術支援

DJI サポート

DJI 지원

DJI Support

Asistencia técnica de DJI

Assistance DJI

Assistenza DJI

DJI-ondersteuning

Suporte DJI

Техническая поддержка DJI

If you have any questions about this document,

please contact DJI by sending a message to

[email protected]

如果您对说明书有任何疑问或建议，请通过以下电子邮

箱联系我们：

[email protected]

。

dji DNG Cleaner User guide

Brand: dji

Model: DNG Cleaner

Type: User guide

This manual is also suitable for

Zenmuse Z3

Download PDF

report

in other languages

italiano: dji DNG Cleaner Guida utente
français: dji DNG Cleaner Mode d'emploi
español: dji DNG Cleaner Guía del usuario
Deutsch: dji DNG Cleaner Benutzerhandbuch
русский: dji DNG Cleaner Руководство пользователя
Nederlands: dji DNG Cleaner Gebruikershandleiding
português: dji DNG Cleaner Guia de usuario
日本語: dji DNG Cleaner ユーザーガイド

dji DNG Cleaner User guide

This manual is also suitable for

dji DNG Cleaner User guide

in other languages

Related papers

Other documents