DAP 7079818211 User manual

Brand: DAP

Model: 7079818211

Type: User manual

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 7/31/17

DAP

DYNAFLEX ULTRA

™

Advanced Exterior

Window, Door & Siding Sealant – White & Colors

• Formulated with innovative Weather Max™ Technology for All Weather Protection

• Resists UV fading, yellowing & dirt pick-up

• Won’t crack, crumble, chalk, bubble or break down

• Lifetime mold, mildew & algae resistance guarantee

• Sealant stays looking clean & new

• 1 hour rain & paint ready

• 100% waterproof & weatherproof seal

• Permanently flexible

• Strong adhesion to wide variety of common building materials

• Easy water clean-up & low odor

• Meets ASTM C920, Type S, Grade NS, Class 35

• Exterior/interior use

Packaging: 10.1 fluid ounces (300 mL)

Colors & UPC Numbers: White: 0 70798 18211 0

Beige: 0 70798 18213 4

Clay: 0 70798 18214 1

Iron Gray: 0 70798 18215 8

Dark Bronze: 0 70798 18216 5

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston St., Baltimore, Maryland 21224

Usage Information: Call 1-888-DAP-TIPS or visit dap.com & click on “Ask the Expert”

Order Information: 800-327-3339

Fax Number: 410-558-1068

Also, visit the DAP website at www.dap.com

Product Description:

DAP

DYNAFLEX ULTRA™ Advanced Sealant for Window, Door, Siding & Trim applications is

formulated with innovative Weather Max™ Technology to resist UV fading, chalking, crumbling, cracking and

dirt build up. It also has a lifetime mold, mildew and algae resistance guarantee, so the sealant stays looking

clean and new. DYNAFLEX ULTRA has strong adhesion to common building materials and stays

permanently flexible for a long-lasting, weatherproof seal that provides All Weather Protection and stands up to

the elements. It is rain ready and paintable in only one hour for better productivity. Does not bubble. The sealant

guns out effortlessly and tools smoothly for easy application. Low in odor and easy water clean-up.

Exterior/interior use. Meets ASTM C920, Type S, Grade NS, Class 35.

Suggested Uses:

Ideal for sealing for installation, weatherization & painting applications on:

• Windows

• Doors

• Siding

• Trim

• Fascia

• Flashing

• Pipes/Vents

Adheres To:

• Fiber Cement

• Vinyl

• Aluminum

• Metal

• Glass

• Composite & PVC trim board

• Wood – Painted & Unpainted

• Cedar

• Concrete & Masonry

• Brick & Stone

• Fiberglass

• Most plastics

For Best Results:

• Apply in temperatures above 40F.

• Not for continuous underwater use, high temperature surfaces or surface defects.

• Not recommended for house wraps such as Tyvek

and other fluoropolymer based substrates such as

Teflon

, HDPE and similar plastics.

• Joint size should not exceed 1/2” wide by 1/2” deep. For joints deeper than 1/2”, use foam backer rod

material.

• Store product away from extreme heat or cold.

Surface Preparation & Application Instructions:

1. Surface must be clean, dry, structurally sound and free of all old sealant, dirt, dust, debris, rust, grease, ice,

snow, frost and other contamination.

2. Priming is not usually necessary; however, some circumstances or substrates may require a primer. Priming

is only required if testing indicates a need or where the sealant will be subjected to constantly high levels of

moisture after cure. It is the user’s responsibility to test substrate compatibility and the adhesion of the cured

sealant on test joint before applying to the entire project. Please contact DAP Technical Customer Service at

1-888-327-8477 for additional information.

3. Cut nozzle at 45º angle to desired bead size.

4. Load cartridge into caulk gun.

5. Fill gap with sealant. Using steady pressure, apply consistent 3/8" bead size for optimal joint protection.

6. Tool or smooth bead within 10 minutes of application with a gloved finger or smoothing tool. If masking

tape is used along the sides of the joint, remove the tape immediately after tooling by pulling the tape away

in a clean, smooth even line.

7. Paintable in one hour (depending on joint depth, temperature and humidity) with most latex or oil-based

paints. Use a latex primer for oil-based paints.

8. Sealant reaches full performance in 72 hours.

9. Clean up excess uncured sealant with a damp cloth or sponge before it skins over, approximately 15

minutes. Scrape or cut away excess cured sealant.

10. Reseal cartridge for future use and store in cool, dry place.

DAP recommends that you test all sealant applications under simulated or actual end use conditions to ensure

the product meets or exceeds all required project specifications. Since assembly conditions may be critical to

the product’s performance, it is also recommended that testing be performed on specimens assembled under

simulated or actual production conditions.

Typical Physical & Chemical Characteristics:

Consistency: Smooth and creamy, non-slumping paste

Volatile: Water

Flash Point: >212ºF

Bubble Resistant: Yes

Filler: Calcium carbonate

Solids: 75% by weight

Extrusion Rate: 20 - 30g/15 seconds Burrell Extrusion

Vertical Sag: < .15 inches ASTM C2202 mod. 3/8” depth

Weight per Gallon: 10.95 lbs./gallon

Hardness Shore A: 24 C661

Tensile Strength: > 100 psi D412

Maximum Elongation: >500 % D412

Service Temperature Range: -30°F to 160°F

Application Temperature Range: 40ºF to 100ºF

Freeze Thaw Stability: Passes 5 Cycles

Peel Adhesion (180° C794):

PVC Trim 17 lbs/in

Glass 19 lbs/in

Fiber Cement 14 lbs/in

Aluminum 24 lbs/in

Vinyl Siding 20 lbs/in

Mortar 20 lbs/in

SDS: 00010329001

ADHERES TO:

Vinyl, Aluminum, Metal, Fiber Cement, Wood,

Cedar, Concrete, Masonry, Brick, Stone,

Stucco, PVC, Composite, Fiberglass, Glass

SPECIFICATIONS

ASTM C920, Type S, Grade NS, Class 35

Federal Spec TT-S-00230C, Type II

PHYSICAL PROPERTIES

Application Temp Range:

40°F to 100°F

Recommended Bead

Size:

3/8”

Coverage:

3/8” bead 14 linear ft.

Skin Time:

10 -15 minutes

Tack Free Time:

30 minutes

Full Cure Time:

7-14 days depending on joint width and depth,

temperature, humidity & substrate

Paint Ready Time:

1 hour w/ latex or oil-based paints. Use latex-

based primer for oil-based paints.

Water Ready Time:

1 hour

Joint Movement/

Flexibility:

+/-35%, Permanently flexible

Mold Resistance:

Lifetime Mold, Mildew & Algae Resistance

Guarantee

Odor:

Low

Clean-Up:

Water

VOC Content:

NCCS Calif. ARB VOC <1.5% wt/wt (VOC 27 g/L)

Shelf Life:

12 months (Unopened/cool & dry conditions)

Clean Up & Storage:

Remove excess uncured sealant with a damp cloth or sponge before it dries. After the sealant has dried/cured,

excess cured sealant must be cut or scraped away. Store in a cool, dry place away from extreme heat or cold.

Safety:

See product label or Safety Data Sheet (SDS) for additional information. For an SDS, contact your supplier or

visit dap.com.

Lifetime Mold, Mildew & Algae Resistance Guarantee:

DAP guarantees that the product when properly applied will remain free of mold, mildew & algae during the

lifetime of your home. If mold, mildew and/or algae appear when product is used as directed within one year of

purchase, provide evidence of mold, mildew & algae and sales receipt to DAP Products Inc., 2400 Boston

Street, Suite 200, Baltimore, MD 21224 for replacement product or sales price refund. DAP will not be liable

for incidental or consequential damages.

QUESTIONS? Call 1-888-DAP-TIPS or visit dap.com & click on “Ask the Expert”.

Baltimore, MD 21224

Made in U.S.A. with U.S.& globally sourced materials.

DAP 7079818211 User manual

DAP 7079818211 User manual

DAP 7079818211 User manual

Related papers

Other documents