Haier C2010 User manual

Safety Precautions

Please read these simple guidelines. Not following them may be

dangerous or illegal. For further information, see the section of

‘Warnings and Precautions’.

Contents

1.Getting to Know Your Phone...........................1

2.GettingStarted......................................5

3.Basic Functions .....................................6

4.TextEntry.........................................12

5.Contacts ..........................................14

6.Messages .........................................19

7.Call history ........................................23

8.Settings...........................................24

9.Profiles ...........................................32

10.Fun and Utilities...................................34

11.Games...........................................36

12.TATAzone........................................37

13.Mydata..........................................38

14.SMSservices.....................................39

15.Care And Maintain.................................40

1Getting to Know Your Phone

Packing list

Basic specification

Your phone package box contains the following items:

Please refer to the packing list on the last page.

Size: 99.1 mm [L] ×41mm [W] ×14.0mm [H]

Weight: (including 800mAh Li-polymer battery)

Standby Time: about 115 hours

Talking Time: about 3 hours

Notice:

Standby time is the handset continuous working time without making

phone calls. Standby time and talking time are both depending on

mobile phone using situations, network situations and environments.

60g

1

&

Mobile phone appearance

Mobile phone view

2

1

3

4

6

2

5

7

The appearance of the mobile phone and introductions

Icon bar

Notice:

Long press means pressing key more than or equal 2 seconds; short

press means pressing key less than 2 seconds.

3

&

4

2Getting Started

Install and charge the phone

1. Remove the battery cover 2. Insert the RUIM card

3. Install the battery 4. Plug the travel charger into the phone

5

3Basic Functions

Switching On/Off

Power Key

Making phone call

Making phone call using the keypad

Send Key

Save number

End Key

Making phone call using contacts

In the power off status, long press the to switch on the

phone.

1.In the standby mode, enter the phone number you want to dial,

and press the to make the call.To delete a character to

the left of the cursor, press <Clear>.To save the number, press

<Options> and select .

2.To end the call, press the .

In the power on status, long press the to switch off the

phone.

Power Key

6

1.In the standby mode, press <Contacts> or press <Menu> to

access the ;

2.Select to view the contacts list, and press to

choose a contact, or select to search out the contact you

want to call, either by name or by number.

3.Press the to make the phone call.

1.In the standby mode, press the to display the last 10

numbers dialled.

2.Scroll to the number or name you wish to redial, and press the

.

In standby mode, long press a number key to make phone call. See

for more information about configuring speed

Main menu > Contacts

List Up/Down key

Search

Send Key

Making phone call using last dialled number

Send Key

Making phone call using speed dial

chapter 5 contacts

7

dial.

Conference calling is a network service that allows you to take part

in a conference call with other participants.

1.Make a call to the first participant.

2.Enter the phone number of the second participant; or retrieve a

number from your Contacts, press <Search> and find out the

number you want to call.

3.Press the , The first participant is put on hold.

4.When the second participant picks up, press the to

connect the calls. (After the conference is initiated, can

be used to switch between both parties).

5.To end the conference call, press the .

Making a conference call

Send Key

Send key

End Key

Notice:

8

&

Whether conference ways calling can be enabled or not depends on

whether the network provider supplies this function and whether

you have applied for such faction.

1.To answer the call, press the or select <Accept>.

Press <Silence> to mute the ringing tone before you answer the call.

2.To reject the call, press the or select <Reject>.

Press the navigation key of your phone to adjust the volume of the

earpiece, during a call.

When adjusting the volume, a bar chart appears in the display

indicating the volume level.

Answering the call

Answer or silence an incoming call

Send Key

End Key

Adjust the earpiece volume

Answer a call with the keypad locked

9

To answer a call with the keypad locked, simply press the .

During the call, all features function as normal. When you end or

reject the call, the keypad automatically relocks.

Send Key

Operations during a call

During a call press <Options> and one of the following options:

Contacts, Messages, DTMF on (off), New call, Mute on (off), Phone

info, Voice privacy.

The keypad lock can prevent you form accidental calls. If the

keypad is locked, it unlocks when you receive a call. After the call,

the lock automatically relocks. Phone will return to idle mode after 2

mins if phone is left idle within sub menus and then it will activate

key lock after set delay.

When the keypad is locked, calls may be possible to the official

Keypad lock

10

emergency number programmed in your phone.

Press [*] key for more than 2 seconds to unlock the keypad.

11

4Text Entry

Text input method

Change the input method

Your phone provides following text input methods:

English input method: input English characters;

Numeric input method: input numeric characters;

12

Press [

*

] to switch between upper case, lower case and

word/sentence case;Long press [

*

] to enter symbol list;

Press [#] to switch between Intelligent, Multi-tap and Numeric

mode.

Press [1] to insert common symbol under the intelligent mode or

multi-tap mode.

13

5Contacts

You can save names and phone numbers (contacts) in the phone

memory and in the RUIM card memory.

1.In the standby mode, press <Menu> to access the

;

2.Change the settings and enter information about the contact

(saved in ).

3.In the screen, you can input name, number and so on.

4.Press <Options> and one of the following: Edit and Save.

Add new

Main menu <

Contacts > Add new

Phone

Add new

14

List

Search

Groups

Display all of the contacts. It will show the contacts list arranged

alphabetically, you can press the key corresponding to the first

letter of the name to search. Use Add to blacklist menu to block

some numbers for incoming calls. Use Add to whitelist menu to

allow some numbers for incoming calls. To search for a record press

left soft key, with the available options of Call, Send message, Send

card, Edit, Delete, Copy, Add to blacklist and Add to whitelist.

In Contacts menu, choose Search and press enter; there are two

options: By name, By number. If you input the wrong name or the

wrong number, the phone will inform you No match found .‘’

15

You can classify a number of contacts into one group in accordance

with their social relationship, for example: RUIM, Family, Friend,

Colleague, VIP, Custom and Default.

Highlight a group, press <Options> and one of the following options:

Rename: Edit the group's name (RUIM and Default can not be

renamed), Ringer, List, Add new.

1. In the standby mode, press <Menu> to access the

;

2. The Copy includes copy all, copy selected.

Use this menu to assign a speed dial number (6 to 9) for 4 of your

most frequently dialled numbers. In Idle mode, press and hold the

appropriate key to dial the speed dial entries.

Copy

Main menu >

Contacts >Copy

Speed dial

16

Delete

Main menu >

Contacts > Delete

Delete all

Delete selected

Storage location

Memory status

1.In the standby mode, press <Menu> to access the

;

2.Select to delete all contacts (when we select delete all

we have to inter security code then we can delete all record, the

security code is 0000).

Select to select the contacts that you want to

delete.

Use this feature to choose storing phone numbers on your RUIM

card or in your phone's memory.

Check the number of contacts you have stored in the phone's

memory and on the RUIM card.

17

My number

Use this feature to check your phone number, or to assign a new

number. Changes made here do not affect the actual subscriber

numbers on your RUIM card.

18

Page is loading ...

Haier C2010 User manual

Haier C2010 User manual

Related papers

Other documents