akira AC-S10CLG1 User manual

Brand: akira

Model: AC-S10CLG1

Category: Split-system air conditioners

Type: User manual

akira AC-S10CLG1 is an air conditioner with a cooling capacity of 9600 Btu/h and a power consumption of 1000 W. It has an air flow of 400 m³/h and a dehumidifying volume of 1.0 L/h. The unit has a compact design and is easy to install. The Swing Motor’s MP is 28 VA with a three amp fuse for the PCB and a 0.2 amp fuse for the transformer. It uses an aluminum fin evaporator with a copper tube and has a row-fin distance of 2-1.5 mm. It uses a hermetic motor compressor with a working temperature of less than 43º C and an aluminum fin condenser with a copper tube with a row-fin distance of 1-1.

Air Conditioner

Service Manual

Model No.: AC-S10CLG1.doc

Version: 1.0

MODEL:AC-S10CLG1

Model No.: AC-S10CLG1.doc

Version: 1.0

CONTENTS

TECHNICAL SPECIFICATION………………………………………………………………………..4

PARTS NAME…………………………………………………………………………………………..5

SYSTEM DAIGRAM…………………………………………………………………………………...6

CIRCUIT DIAGRAM………………………………………………………………………...................8

DISASSEMBLY PROCEDURES……………………………………………………………………….9

EXPLODED VIEW AND PARTS LIST……………………………………………………………….18

GUIDE FOR INSTALLATION……………………………………………………………………….. 22

CARE AND MAINTENANCE…………………………………………………………………….…..29

MULFUNCTION ANALYSIS…………………………………………………………………………30

Model No.: AC-S10CLG1.doc

Version: 1.0

TECHNICAL SPECIFICATION

Model

AC-S10CLG1

Function Cooling /

Power Supply

1Ph 230V / 50Hz

Capacity (Btu/h) 9600 /

Rated Input (W) 1000 /

Rated Current (A) 5.7 /

Air Flow (m³/h) 400

Dehumidifying Volume (L/h) 1.0 /

EER ( W / W) 2.8 /

Model

AC-S10CLG1

Motor Fan Speed (rpm) 980

Output Fan Power (W) 13

Fan Type / Piece Cross Flow Fan – 1

Diameter – Length Φ 97mm – 583mm

Evaporator Aluminum Fin – Copper Tube

Row-Fin Distance (mm) 2 – 1.5

Swing Motor MP 28 VA

Fuse (A) PCB 3.15A Transformer 0.2A

Noise (db / (A)) < 37

Dimension (w x h x d)(mm) 770 x 190 x 250

Indoor Unit

Net Weight (kg) 8.0

Model

AC-S10CLG1

Input Power (W) 960 /

LRA (A) 4.5

Throtting Method Capillary

Compressor Hermetic Motor Compressor

Working Temp. < 43º C

Condenser Aluminum Fin-Copper Tube

Pipe-Diameter (mm) 9.52

Row-Fin Distance (mm) 1 – 1.6

Working Area /

Fan Motor Power (W) Speed

(rpm)

20 / 950

Fan Type-Piece Axial Flow Fan – 1

Diameter (mm) 320

Defrosting Method Auto Defrosting

Noise (db/ (A)) < 52

Dimension (w x h x d) (mm) 720x 260 x 430

Net Weight (kg) 25

Outdoor Unit

Refrigerant Charge R22 / 0.65

Liquid (mm) Φ 6

Outer Diameter

Gas pipe (mm) Φ 9.52

Height (m) 10

Connecting Pipe

Max. Distance

Length (m) 20

The technical data are subject to change without notice. Please refer to the nameplate of the unit.

PARTS NAME

Model No.: AC-S10CLG1.doc

Version: 1.0

SYSTEM DIAGRAM

When the power is on, the unit start to work. The compressor sucks low-pressure

refrigerant gas from the evaporator and discharges high-temperature and high-pressure

gas into condenser. Then air exchanges the heat with outdoor air and becomes

refrigerant liquid. The liquid is throttled by the capillary and changes into low-pressure

liquid and low-pressure liquid and then flows into indoor evaporator. The liquid

exchanges the heat and changes into low-temperature and low-pressure refrigerant gas,

the cycle introduced above goes on and on, and the demanded low temperature

environment is maintained.

Model No.: AC-S10CLG1.doc

Version: 1.0

When the power is on, indoor and outdoor units will start to run. When the system

operates in cool mode, the compressor sucks low-temperature refrigerant gas from the

evaporator an sucked by compressor, compressor into high-temperature, high-pressure

Gas, and then discharges into condenser, heat exchanges with the outdoor air becomes into

refrigerant liquid, the liquid is throttled by the capillary and the temperature and

pressure lower down, enter into the evaporator, heat exchanges with the indoor air which

need to be adjusted, then changes into low-temperature, low-pressure refrigerant gas, the

cycle introduced above goes on and on, the demanded low temperature environment is

maintained. (when in heat mode, the 4way valve changes its way and the refrigerant flows

in the reversible cycle, to make the condenser sucks heat, evaporator discharges heat, and

the demanded high temperature environment is maintained.

Model No.: AC-S10CLG1.doc

Version: 1.0

CIRCUIT DIAGRAM

Model No.: AC-S10CLG1.doc

Version: 1.0

DISASSEMBLY PROCEDURES

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

EXPLODED VIEW – Indoor Unit

Model No.: AC-S10CLG1.doc

Version: 1.0

Model No.: AC-S10CLG1.doc

Version: 1.0

PART LIST – Indoor Unit

NO. Part Code Part Description Qty

1 01252220 Wall Mounting Frame 1

2 222020012 Rear Case 1

3 01002072 Evaporator Assy 1

4 10352001 Cross Flow Fan 1

5 76512203 O-Gasket of Cross Fan Bearing 1

6 05232411 Drain Pipe 1

7 20182027 Water Tray 1

8 10512032 Air Louver 12

9 10582002 Swing Lever 1

10 10582003 Swing Lever 1

11 20002210 Front Case 1

12 24252006 Screw Cap 3

13 11122002 Filter 2

14 30512506 Remote Control Y512 1

15 68012019 Magic Mirror 1

16 30545702 Display Board 1

17 20002209 Front Panel 1

18 10512034 Guide Louver 1

19 10512033 Guide Louver 1

20 15212110 Stepping Motor 1

21 26112014 Motor Press Plate 1

22 15012064 Fan Motor 1

23 22242030 Electric Box Cover 1

24 42011240 4-bit Terminal Board 1

25 201220061 Electric Box Cover 1

26 20102178 Electric Box 1

27 30055787 Main Board 1

28 43110204 Transformer 1

29 71010103 Fixed Clamp 1

30 24242001 Pipe Clamp 1

31 40020540 Connecting Cable 1

32 Signal Cable

33 400202802 Power Cord 1

34 10582409 Press Plate of Swing Link 1

35 10582408 Swing Louver 1

36 10542004 Swing Louver(up) 1

37 10542005 Swing Louver(down) 1

The data are subject to change without prior notice

Model No.: AC-S10CLG1.doc

Version: 1.0

EXPLODED VIEW – Outdoor Unit

Page is loading ...

akira AC-S10CLG1 User manual

Brand: akira

Model: AC-S10CLG1

Category: Split-system air conditioners

Type: User manual

Download PDF

report

akira AC-S10CLG1 User manual

akira AC-S10CLG1 User manual

Related papers

Other documents