Strobel VEB100-2W Operating Instructions Manual

For the professional user

Für den professionellen Anwender

Betriebsanleitung

Class:

Klasse:

Dated:

Stand:

VEB100-1 Ausf. 3

VEB100-2 Ausf. 3

VEB100-2W Ausf. 3

VEB100-4 Ausf. 1

VEB100-5 Ausf. 1

Operating Instructions

Spezialmaschinen GmbH

Im Zeichen der Qualität

ou nd the Strobel trademark on every Strobel

machine leaving our works. And with good reason.

This symbol is a guarantee of the high quality of

our products. Quality which creates trust – trust

in our technology, our service and, not least of all,

in our good name.

ie nden die Strobel-Schutzmarke auf jeder

Strobel-Maschine, die unser Werk verlässt.

Und das aus gutem Grund. Denn dieses Zeichen

garantiert Ihnen die hohe Qualität unserer

Produkte. Qualität, die Vertrauen schafft – in unsere

Technik, unseren Service und nicht zuletzt in unseren

guten Namen.

S

Y

The sign of quality

trobel clients know that they can expect a particularly

high standard of performance from our company and our

machines. Now you have settled for one of our products.

For us this is a source of encouragement and of obligation

to Justify your trust.

If you wish to prot from the performance and efciency of

your Strobel machine as long as possible, exact handling

and thorough care is necessary. For this reason we kindly

request that you read the operating instructions closely.

It provides all the information you need for trouble free

operation.

And if you do happen to need a spare part the enclosed

spare parts list gives a complete overview. It is clearly

classied according to components so that you can nd the

required part quickly and easily. In order to avoid errors we

request you to quote machine class, machine number and

part number completely on your spare part order.

We wish you lots of success in your work with your new

Strobel machine.

S

A decision with future

Spezialmaschinen GmbH

1 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

For under table assembly

2 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

3 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

Operating instructions

VEB100-1, -2, -2W, -4, -5

Table of contents

1 General notes on safety .............................................................................................. 5

2 General notes .............................................................................................................. 7

2.1 Operating instructions ......................................................................................... 7

2.2 Class designations, machine number and initial basis for descriptions ............... 7

2.3 Applications of the machine ................................................................................ 7

2.4 Technical data of machine .................................................................................. 8

3 Setup and installation .................................................................................................. 9

3.1 Unpacking the machine ...................................................................................... 9

3.2 Setting up the machine ....................................................................................... 9

3.3 Direction of rotation on machine ....................................................................... 11

3.4 Motor drive via V-belts ...................................................................................... 11

3.4.1 Tensioning the V-belt ............................................................................. 11

3.4.2 Positions of the machine ........................................................................ 12

3.5 Motor drive using tooth belts ............................................................................. 15

3.5.1 Tension of toothed belt (Fig. 5) ............................................................... 15

3.5.2 Machine positions ................................................................................... 16

4 Notes on usage ......................................................................................................... 17

4.1 Needles and threads ......................................................................................... 17

4.2 Inserting the needles ......................................................................................... 17

4.3 Threading and thread insertion ......................................................................... 19

4.4 Thread tension .................................................................................................. 20

4.5 Thread take-up lever ......................................................................................... 20

4.6 Stitch depth control ........................................................................................... 20

4.6.1 Adjusting the stitch depth ...................................................................... 20

4.7 Cloth retainer (Fig. 9) ........................................................................................ 21

4.7.1 Setting the plunger limit stop for sewing over cross seams .................... 23

4.7.2 Setting the automatic plunger ................................................................. 23

4.7.3 Setting the cloth retainer Cl. VEB100-4 .................................................. 24

4.8 Sewing material transport ................................................................................. 25

4.8.1 Adjusting the stitch length....................................................................... 25

4.8.2 Adjusting the upper feed dog .................................................................. 25

4.9 Interval (Cl. VEB100-1, -2, -2W, -4) .................................................................. 26

4.9.1 Activate and adjusting the interval .......................................................... 26

4 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

4.10 Motor ................................................................................................................. 26

4.11 Seam lock (version RF)..................................................................................... 27

4.11.1 General................................................................................................... 27

4.11.2 Switching on the seam lock .................................................................... 27

4.11.3 Seam lock ............................................................................................... 27

4.11.4 Thread tension at seam lock .................................................................. 28

4.11.5 Feed dog at seam lock ........................................................................... 28

4.11.6 Plunger lowering at seam lock ................................................................ 28

4.11.7 Switching off the seam lock .................................................................... 28

5 Operating the machine .............................................................................................. 29

5.1 Switching on ...................................................................................................... 29

5.2 Placing and removing the fabric - sewing process ............................................ 29

5.3 Sewing .............................................................................................................. 30

5.3.1 Seams with blind stitches ....................................................................... 31

5.3.2 Sewing with folder .................................................................................. 32

5.3.2.1 Setting the folder ........................................................................ 33

5.3.2.2 Replacing the folder ................................................................... 35

5.3.2.3 Hemming with folder (Cl.VEB100-5) .......................................... 35

5.3.2.4 Seaming with roll seamer (Cl. VEB100-4) ................................. 36

5.3.3 Attaching the trouser waistband lining (Fig. 17) ...................................... 37

5.3.4 Attaching facings .................................................................................... 37

5.4 Sewing problems and troubleshooting .............................................................. 38

6 Servicing the machine ............................................................................................... 41

7 Variable sewing tools ................................................................................................ 41

8 Optional extras .......................................................................................................... 47

8.1 Thread trimmer ................................................................................................. 47

8.2 Hemmer ............................................................................................................ 47

8.3 Digital display 392.0637 .................................................................................... 47

8.4 Pneumatic lifting ................................................................................................ 47

8.5 Seam lock ......................................................................................................... 47

8.6 Compact drive ................................................................................................... 47

8.7 Stand set ........................................................................................................... 47

Subject to change without prior notice

5 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

1 Every person in charge of setting up, operating, servicing and repairing the

machine must first read and understand the operating instructions and

particularly the safety instructions before starting up the machine.

General notes on safety

Failure to comply with the following safety instructions can lead to bodily

injury or damage to the machine.

1. The machine must only be operated by persons familiar with the relevant

operating instructions and who have been instructed accordingly.

2. Before commissioning also read the notes on safety and the operating

instructions of the sewing drive manufacturer.

3. Only use the machine in the intended manner and never without the

provided guards. Always observe the pertinent safety regulations.

4. Switch off the main switch or pull the power plug for threading, changing

the reels, exchanging sewing tools such as needle, gripper, needle plate,

transport devices, possibly cutter and cutting block, for cleaning and when

leaving the workplace as well as for maintenance.

5. General maintenance tasks may be carried out only by properly trained

persons in accordance with the operating instructions.

6. Repair work, retrofitting and maintenance may be carried out only by

technicians or specially trained personnel.

7. When servicing or repairing pneumatic equipment, the machine must be

disconnected from the pneumatic supply. Exceptions are only allowed for

adjustment work and tests of functionality performed by specially trained

technicians.

8. Only specially qualified technicians may work on the electrical equipment.

9. It is forbidden to work on electrically live components! Exemptions are

covered by the EN50110 (DIN VDE0105) regulations.

10. Any retrofitting or alterations to the machine may only be performed under

strict compliance with all pertinent safety regulations.

11. Only use our approved spare parts when servicing and/or repairing the

machine.

12. It is forbidden to operate the sewing head until it is determined that the

entire sewing unit complies with EU provisions.

13. It is essential that you observe and follow these instructions as well as the

generally valid safety regulations.

6 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

14. Warning instructions given in the operating instructions that pertain to

especially dangerous parts of the machine must be indicated at these

positions using a safety symbol.

Warning instructions given in the operating instructions that pertain to

special injury hazards for operating personnel or technicians must be

indicated at these positions using a safety symbol.

7 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

2

2.1

General notes

Every person in charge of setting up, operating, servicing and repairing the

machine must first read and understand the operating instructions and

particularly the safety instructions before starting up the machine.

Operating instructions

2.2

The operating side of the machine is the initial basis for left/right descriptions.

Class designations, machine number and initial basis for

descriptions

The class designation (type) and machine/model numbers are fastened to the

rear of the machine case.

2.3

Class VEB100-1 are mainly suitable for blind stitching thin woven and knitted

fabrics.

Applications of the machine

Class VEB100-2 are universal hemming machines for thin and medium weight

material with cross seams.

Class VEB100-2W is suitable for attaching waistbands linings on trousers, also

for waistbands with already closed belt loops attached.

Class VEB100-4 serves specifically for uniform, delicate rolling and sewing of

the edges on skirts, dresses, blouses, silk scarves, pochettes, etc. made of

thinnest, thin and medium fabrics.

The roll seam width can be varied by exchanging the seamer size.

Class VEB100-5 is suitable for attaching the folded side back and centre back

seams of half-lined sack coats. 6 different folder sizes are available.

Exchanging the variable sewing tools, i.e., can extend the range of applications

of the different machines that other fabric qualities than the above mentioned

ones could be sewn as well.

Variable sewing tools please see point 7.

8 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

2.4

Recommended rated speed:

Technical data of machine

Cl. VEB100-2, -2W 2200 min-1

Cl. VEB100-1, -4, -5 1800 min-1

Machine pulley diameter DW 80 mm

Min. motor power 550 W

V-belt profile 10 x 6 mm

Toothed belt pulley/machine Z=38

Toothed belt profile HTD 5M-9

Stitch length Cl. VEB100-1,-2, -2W,-5 5–8 mm

(depend on fabric)

Cl. VEB100-4 2 - 5 mm

(depend on fabric)

Stitch type Single thread-chain stitch-blind stitch

Stitch type 103

Interval: Cl. VEB100-1,-2, -2W,-4 1:2 shiftable

Needle system GROZ-BECKERT 1669 EEO

Needle size Cl. VEB100-1, -2, -5 80

Cl. VEB100-2W 90

Cl. VEB100-4 70

Thread polyester continuous filament

Thread size Cl. VEB100-1, -2, -2W, -5 120/2

Cl. VEB100-4 200/2

Pneumatic connection 6 bar

Average air consumption depending on the equipement

Required space 0.5 m x 1.1 m

Noise:

Average noise level at a speed of

n = 1800 min-1 Cl. VEB100-1, -4, -5: LpAm 70 dB(A)

n = 2200 min-1 Cl. VEB100-2, -2W: LpAm 71 dB(A)

Noise test according to DIN 45635-48-1 KL3

9 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

3

3.1

Setup and installation

Strobel machines are supplied either as complete units with head, stand and

motor, or head with motor only, or the head only.

Unpacking the machine

Reel stand, rods and other accessories are packed into the packing.

Make sure that all accessories have been unpacked before throwing away any

packing material.

3.2

Setting up the machine

CAUTION! Danger of injury!

Entanglement hazard for clothing or hair and

Danger of finger injuries!

Never operate the machine without the belt guards for the

upper part and motor.

If the machine head is supplied without stand and motor first make the borings

into the table top as shown in the drawing. Mount rods and treadles and electric

connections according to the connecting diagram.

Mount the motor. Electric connection as per connecting diagram shown in the

motor's operating instructions.

The upper component must be fastened to the provided rubber plate on the

table top. The belt guard must be installed after inserting the V-belt.

Mount the V-belt and tense it according to “3.4.1 Tensioning the V-belt“.

Mount the belt guard.

Mount the lifting and motor operating rods.

Using a compact motor means to assemble the control box and speed controller

under the table. Also the operating rod between speed controller and pedal has

to be connected.

After assembling the single parts of the reel stand mount it to the right hand side

of the tabletop.

Make sure that all screws on the stand are tight and retighten them, if

necessary.

Mount the synchronizer and set it as described under “3.4.2 Positions of the

machine“.

10 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

CAUTION! Danger of injury!

Before starting the machine, check that the electrical

specifications given on the type plate of the motor,

particular grid voltage and frequency, are appropriate for

your electric system.

Any anti-rust substances, such as vaseline or similar, must be carefully

removed from the sewing tools before starting up the machine.

11 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

3.3

When facing the handwheel, turn it in a clockwise direction.

Direction of rotation on machine

3.4

3.4.1

Motor drive via V-belts

Tensioning the V-belt

Caution! Danger of injury!

When checking the belt tension, switch off the machine at

the mains. Do not operate the machine without the belt

guard. Otherwise there is a DANGER of crushing

fingers, of injuries to the body and of pulling in parts of

clothing.

The tensioning of the V-belt is carried out by swivelling the motor underneath

the table plate after releasing the retaining nut with SW 24, (1) in Fig. 1.

The V-belt must not be tensioned too much, especially with the stop motor. You

should be able to compress it with light thumb pressure by about 2 cm.

Too little V-belt tensioning can impair the positioning of the machine and

therefore impair the function sequence.

Fig. 1

12 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

3.4.2

Positions of the machine

Caution! Danger of injury!

Danger of crushing fingers and needle through stitching as

well as pulling in of parts of clothing.

Keep fingers and hands away from moving parts when

setting the position generator and checking the positions

with switched-on machine.

General:

Stop motors require a position generator, which takes the mechanical setting of

the machine from the main screw and transmits this to the control of the motor.

With this, for instance, the thread cutter can always be electrically approached

in exactly the same needle looper position. (Fig. 2)

The correct position of the position generator to the flange is marked with a spot

of paint.

To adjust or to remove, release the two clamping screws (1), Fig. 2 tighten

these firmly prior to commissioning.

Fig. 2

With positioning with plunger reset, the motor reverses after thread cutting for a

certain value, to facilitate the insertion of the sewing matter. This does not affect

the setting of the position generator.

13 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

Machine with or without thread cutter:

The machine requires a needle position and, depending on the sewing drive,

possibly also a reference position.

Reference position (Fig. 3):

The reference position must be set in such a way, that the point of the

needle in the direction of the insertion stitch closes with the right (inner)

edge of the needle slide plate.

Fig. 3

14 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

Needle position (when stopped within and outside of the stitch (Fig. 4))

(when using a thread trimmer):

Adjust the needle position so that when the machine is switched off, the

hook of the thread blade can reliably catch the thread loop above the

looper without touching it.

In conclusion, check this by manually actuating the thread trimmer.

Fig. 4

Notes for sewing drives with more than needle positions:

The needle position given above is suitable for sewing at position 2.

It is very important to set position 1 in accordance with the operating

instructions pertaining to the chosen mode of sewing.

15 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

3.5

3.5.1

Motor drive using tooth belts

Tension of toothed belt (Fig. 5)

CAUTION! Danger of injury!

Switch off the machine at the mains when checking the

belt tension. Do not operate the machine without belt

guard. Otherwise DANGER of crushing fingers, of injuries

to the body or of pulling in of part of clothing.

The toothed belt should not be tensioned too much. You should be able to push

through it with light thumb pressure by about 5 mm.

Too little or too tight toothed belt tensioning can impair the positioning of the

machine and therefore impair the function sequence.

Tensioning the toothed belt (Fig. 5):

- Release the upper and the bottom retaining screw (1), (2) at the upper part

of the machine.

- Pull out the motor slightly and tighten the bottom retaining screw (2)

slightly.

- Tension the toothed belt by swivelling the motor.

- Tighten the upper and the bottom retaining screw (1), (2) again.

Fig. 5

16 BA_VEB100-1-2-2W-4-5_A3-1_180615_en

3.5.2

Machine positions

CAUTION! Danger of injury!

Entanglement hazard for clothing or hair and danger of

finger injuries and needle punctures! When checking the

positions while the machine is turned on, keep your

fingers and hands away from moving parts.

Machine with or without thread trimmer:

The machine requires a needle position and depending on the sewing drive,

possibly also a reference position.

Reference position:

The reference position must be set in such a way, that the point of the

needle in direction of the insertion stitch closes with the right (inner) edge

of the needle slide plate.

Needle position (with stop in and outside the seam (Fig. 4)):

The needle position must be set in such a way, that when the machine is

stopped, the hook of the thread knife catches the thread loop lying over

the looper securely without touching the looper.

Notes for sewing drives which have two needle positions:

The above mentioned needle position is position 2 at the sewing drive.

It is essential that position 1 is set with consultation of the operating

instructions of the sewing drive

Needle position (when stopped within the stitch):

The needle position must be set so that the tip of the needle closes

against the right edge of the needle slide plate facing towards the outward

stitch.

At the same time, the thread loop lies under tension across the looper.

The needle position is position 1 at the sewing drive.

Fig. 6

Page is loading ...

Strobel VEB100-2W Operating Instructions Manual

This manual is also suitable for

Strobel VEB100-2W Operating Instructions Manual

Related papers

Other documents