Boss EV-1-WL Owner's manual

EV-1-WL
Boss
Brand
Boss
Model
EV-1-WL
Category
Bluetooth music receivers
Type
Owner's manual

Boss EV-1-WL: Unleash Your Musical Creativity with Wireless MIDI Control

The Boss EV-1-WL is a revolutionary wireless MIDI controller that empowers you to control compatible MIDI devices with exceptional freedom and flexibility. This compact and lightweight device connects seamlessly to your MIDI-compatible instruments, pedals, and software via Bluetooth LE, eliminating the need for cumbersome cables.

With the EV-1-WL, you can control a wide range of MIDI parameters such as volume, sustain, modulation, and program changes, all without being tethered to your gear.

Boss EV-1-WL: Unleash Your Musical Creativity with Wireless MIDI Control

The Boss EV-1-WL is a revolutionary wireless MIDI controller that empowers you to control compatible MIDI devices with exceptional freedom and flexibility. This compact and lightweight device connects seamlessly to your MIDI-compatible instruments, pedals, and software via Bluetooth LE, eliminating the need for cumbersome cables.

With the EV-1-WL, you can control a wide range of MIDI parameters such as volume, sustain, modulation, and program changes, all without being tethered to your gear.

EV-1-WL Connection
Guide
(Connect with WM-1,
WM-1D)
This guide shows you how to pair the EV-1-WL
wirelessly to the WM-1 or WM-1D using BLE MIDI.
“Pairing” involves registering the MIDI device that
you want to use (making the devices recognize
each other) with the EV-1-WL.
Pairing the EV-1-WL with another compatible
device lets you control that device via MIDI from
the EV-1-WL.
01© 2021 Roland Corporation
What is “BLE MIDI”?
“BLE MIDI” is the technology used to transmit and
receive MIDI messages wirelessly via Bluetooth®
LE standard.
This is ocially known as “MIDI over Bluetooth Low
Energy.”
2
Connecting the EV-1-WL to
the WM-1
1. Connect the WM-1 to the MIDI device
and set it to STANDARD (Host) mode.
2. Make sure that the Bluetooth indicator
on the EV-1-WL is blinking white.
If the indicator is blinking blue or is lit up white,
operate the device as shown below to make the
indicator blink white.
Blinking blue Quickly press the [Bluetooth] button twice
on the EV-1-WL.
Lit white
The unit is connected to a dierent device.
Disconnect on the connected device side,
or long-press the [Bluetooth] button on
the EV-1-WL.
3. Press the [Bluetooth] button on the
EV-1-WL.
The Bluetooth indicator on the EV-1-WL rapidly
blinks white, and pairing begins.
The Bluetooth indicators on both units stop
blinking and remain lit when pairing is nished,
and the indicator on the WM-1 starts blinking
slowly.
3
* If the devices do not pair after one minute has
passed, pairing mode is automatically canceled.
* The units automatically connect next time they
are restarted.
The EV-1-WL remembers the information
for the last Bluetooth device to which it
was connected. When connecting to a
dierent device after connecting to the
WM-1, or when turning o the power
while the Bluetooth indicator is blinking
white (not connected), or when doing
a factory reset of the EV-1-WL, the unit
does not pair automatically. In this case,
you must start from step 1 to congure
the settings.
* You can’t use the FAST MODE connection of the
WM-1. The only mode you can use to connect
with the EV-1-WL is STANDARD (Host) mode.
4
Connecting the EV-1-WL to
the WM-1D
1. Connect the WM-1D to your computer,
and set it to STANDARD (Host) mode.
2. Make sure that the Bluetooth indicator
on the EV-1-WL is blinking white.
If the indicator is blinking blue or is lit up white,
operate the device as shown below to make the
indicator blink white.
Blinking blue Quickly press the [Bluetooth] button twice
on the EV-1-WL.
Lit white
The unit is connected to a dierent device.
Disconnect on the connected device side,
or long-press the [Bluetooth] button on
the EV-1-WL.
3. Press the [Bluetooth] button on the
EV-1-WL.
The Bluetooth indicator on the WM-1D rapidly
blinks white, and pairing begins.
The Bluetooth indicators on both units stop
blinking and remain lit when pairing is nished,
and the indicator on the WM-1D starts blinking
slowly.
5
* The units automatically connect next time they
are restarted.
* If the devices do not pair after one minute has
passed, pairing mode is automatically canceled.
The EV-1-WL remembers the information
for the last Bluetooth device to which it
was connected. When connecting to a
dierent device after connecting to the
WM-1D, or when turning o the power
while the Bluetooth indicator is blinking
white (not connected), or when doing
a factory reset of the EV-1-WL, the unit
does not pair automatically. In this case,
you must start from step 1 to congure
the settings.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Boss EV-1-WL Owner's manual

EV-1-WL
Boss
Brand
Boss
Model
EV-1-WL
Category
Bluetooth music receivers
Type
Owner's manual

Boss EV-1-WL: Unleash Your Musical Creativity with Wireless MIDI Control

The Boss EV-1-WL is a revolutionary wireless MIDI controller that empowers you to control compatible MIDI devices with exceptional freedom and flexibility. This compact and lightweight device connects seamlessly to your MIDI-compatible instruments, pedals, and software via Bluetooth LE, eliminating the need for cumbersome cables.

With the EV-1-WL, you can control a wide range of MIDI parameters such as volume, sustain, modulation, and program changes, all without being tethered to your gear.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents