Channel Vision C-0128D User manual

C-0128D
Channel Vision
Brand
Channel Vision
Model
C-0128D
Type
User manual

This manual is also suitable for

Channel Vision C-0128D is a designer hinged door for structured wire enclosures that provides an attractive alternative to standard white sheet metal covers. Its extruded aluminum frame and charcoal plexiglass window create a high-tech look that showcases the advanced technology within the enclosure. It is lightweight, easy to install, and can be hinged from either the left or right side. Cooling vents in the top and bottom ensure adequate airflow, and a fan kit is available for increased air circulation.

Channel Vision C-0128D is a designer hinged door for structured wire enclosures that provides an attractive alternative to standard white sheet metal covers. Its extruded aluminum frame and charcoal plexiglass window create a high-tech look that showcases the advanced technology within the enclosure. It is lightweight, easy to install, and can be hinged from either the left or right side. Cooling vents in the top and bottom ensure adequate airflow, and a fan kit is available for increased air circulation.

CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-084 RevB
Designer hinged door for use
with enclosures:
C-0128E, C-0138E, & C-0150E
C-0128D, C-0138D,
& C-0150D
CVHANNEL ISION
TM
© 2004 Channel Vision Technolo
gy
234 Fischer Avenue Costa Mesa, CA 92626
(714) 424-6500 (800) 840-0288 (714) 424-6510 fax
www.channelvision.com email: sales @ channelvision.com
·
··
·
2
1. Install screw into upper corner of enclosure and hang the door on the
screw using the slotted screw hole on its hinge.
2. Install screws in the middle and bottom of hinge.
(Note: C-0128D does not have a bottom screw)
C-0150D shown
for reference only
The C-0128D, C-0138D, & C-0150D designer hinged doors
provide an attractive alternative to the standard white sheet
metal covers typically used on structured wire enclosures.
The extruded aluminum frame and charcoal plexiglass
window create a high-tech look that showcases the
advanced technology within the enclosure.
!
!
!
!
Light weight and easy to install
Hinges from either left or right side
Cooling vents in top and bottom
Fan kit (model C-1322) is available for increased air circulation
Features:
Installation:
Note the position of the swing arm.
A universal key is supplied with all of the lock mechanisms
above. If the key is lost, it can be replaced with another
standard key from Channel Vision.
The lock mechanism:
Universal keys:
3
Unlocked
position
Locked
position
Swing arm disengages
the lip of the enclosure
Swing arm engages
the lip of the enclosure
  • Page 1 1
  • Page 2 2

Channel Vision C-0128D User manual

C-0128D
Channel Vision
Brand
Channel Vision
Model
C-0128D
Type
User manual
This manual is also suitable for

Channel Vision C-0128D is a designer hinged door for structured wire enclosures that provides an attractive alternative to standard white sheet metal covers. Its extruded aluminum frame and charcoal plexiglass window create a high-tech look that showcases the advanced technology within the enclosure. It is lightweight, easy to install, and can be hinged from either the left or right side. Cooling vents in the top and bottom ensure adequate airflow, and a fan kit is available for increased air circulation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents