Akura APLDVD2049W-HDID Quick start guide

Brand: Akura

Model: APLDVD2049W-HDID

Type: Quick start guide

Akura APLDVD2049W-HDID is a versatile entertainment device that combines a high-quality LCD TV with a built-in DVD player. With its compact design and easy-to-use interface, the APLDVD2049W-HDID is perfect for small spaces or as a secondary TV in your home.

The 10.1-inch LCD screen delivers sharp and vibrant images, making it ideal for watching your favorite shows, movies, and DVDs. The built-in digital tuner allows you to access a wide range of free-to-air digital TV channels, while the DVD player supports both DVDs and CD-Rs.

The APLDVD2049W-HDID also features a variety of convenient features, including:

GETTING STARTED

Please read the safety section (page 2) in the main instructions

before proceeding further. This section

contains vital information to ensure safe positioning and use of

the TV

Unpack the TV and place on a flat level surface suitable to support the weight of the TV (5.3 kg approx.).

Remove the plastic protective film on the front of the screen.

Connect the aerial into the TV Tuner connector at the left side of the TV (Fig 2).

Fig.2

Fig.3

Connect the mains power lead to the mains adaptor and insert the

DC jack into

the DC-INPUT socket at the left side of the TV. Plug in and switch on at the

mains. The LED indicator on the TV will illuminate and show red

(Fig 1).

Open the battery compartment cover (Fig 3) on the reverse of the

remote

control. Insert 2 x AAA 1.5V alkaline batteries in accordance with the diagram in

the battery compartment. Take care to observe the correct polarity (+/-). Refit

the battery compartment cover

Press the POWER button (Fig 4) to turn the TV set on. The LED indicator will

turn green and after a few seconds, the screen will activate and

the first time

installation menu (Fig. 5) will appear.

Use the cursor ▼/▲ buttons on the remote control to move up and down the

display to highlight desired options.

The default language is “English”

if you want another language select that

language using the ►/◄ buttons and press Ok.

10.

Select AUTOTUNING and press OK. Fig 6 will be displayed, using the ▲/▼

buttons select to country of use (UK is default). Select START and press OK, the

TV will now search the entire UHF range for both digital and Analog TV stations.

See Fig 7. When search is complete the TV will display the first

channel (BBC1)

in DVBt mode.

Fig.4

Fig 1

Fig.6

Fig.7

WATCHING TV (basic operation)

11. To select a channel either enter the number of the channel using the number

buttons on the remote control or scroll through the channels using the channel

CH+/-

buttons.

12. To view analogue TV channels press the SOURCE button to display the source

menu. Using the cursor ▲ / ▼ buttons highlight TV on the menu and press OK to

select. To view digital TV channels select DTV on this same menu.

13. To check the list of channels stored, press the CH.LIST button to display the

channel list and use the cursor ▲ / ▼ buttons to move up and down the display.

To select a channel, highlight the channel on the list and press

OK to confirm.

14. Adjust the volume to the desired level using the volume

or cursor ◄ / ►buttons.

The sound can be silenced by pressing the MUTE button on the remote control

and a mute symbol will appear on the screen. Press the MUTE button a second

time to restore the sound.

15. To switch off the TV for short periods, press the POWER

button. The TV will go

into standby mode and the LED indicator will change to red. If not using the TV

for extended periods turn off at the mains switch to conserve electricity, all

settings will be retained.

Fig.5

APLDVD2049W-HDID

MSD106

Quick Start Guide

DVD Operation

16. To select DVD operation press the SOURCE/INPUT button to display the source menu. Using the cursor ▲ / ▼

buttons highlight DVD on the menu and press OK to confirm.

17 Place a DVD or CD-R disc into the slot on the right side of the Tv. (Fig 8). The disc must have the Mirror side facing

you and the Label side facing away. Do not handle the disc surface . Push the disc in gently and it will load

automatically.

Fig.8

The disc will now start to be “Read”

and then, depending upon the type of disc, will play or display

the disc menu or

disc contents. Select the item you wish to view, using the navigation buttons on the remote control and press “OK”.

19. To manually control DVD play you can use the control buttons located on the side panel (Fig 9).

Fig.9

For advanced operation of this TV and DVD player please consult the Instruction Manual.

Should you have difficulty in operating this unit, please consult the Trouble Shooting Guide

in the Instruction Manual. If you suspect a fault, please contact the Customer Help

Line, details of which can be found in the Instruction Manual.

20.

When you wish to remove a disc, press STOP and then EJECT. Do not grip the disc to pull it out of the player, wait

until the disc stops moving before gripping the disc outer and removing carefully. See page 21 in the main manual

for correct handling of discs.

LCD Screen

Although the LCD screen is made with high precision technology and 99.9% or more of the pixels are effective,

dots may appear. These can be black or bright dots (red, green or blue) and may appear constantly on the

LCD screen. This is a structural property of the LCD panel and is not a malfunction.

Mirror Side

Press to fast forward.

2. Press to select previous track or chapter.

Press to play and pause disc. If paused press to restart playing.

Press to stop disc playing. Press once to “pre stop”

press again

to fully stop.

Press to select next track or chapter

6. Press to insert or eject disc from player.

Akura APLDVD2049W-HDID Quick start guide

Brand: Akura

Model: APLDVD2049W-HDID

Type: Quick start guide

The APLDVD2049W-HDID also features a variety of convenient features, including:

Download PDF

report

Akura APLDVD2049W-HDID Quick start guide

Akura APLDVD2049W-HDID Quick start guide

Related papers