Base fitting and removal.
To fit the base plate.
Place the TV face up on
a suitable surface with
the base mounting facing
you (Fig 1).
Place the base plate as shown in Fig 2. Apply the base plate to the base
mounting slots and rotate Anti Clockwise until the base “clicks” and is
firmly fixed.
To remove the base. Place TV onto its back, carefully lift the clips
outward and rotate the base Clockwise. Fig 3
-
1
Akura APLDVD1921W-HDID User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI