Grizzly H8372 Owner's manual

Brand: Grizzly

Model: H8372

Type: Owner's manual

Grizzly H8372 is a high quality spotting scope, great for viewing wildlife and down range targets. With a 9-27x magnification and a 50mm objective lens diameter, it provides a clear and detailed view of distant objects. The 45° ocular angle makes it comfortable to use for extended periods of time. The 1/4"-20 tripod mount thread allows you to attach the scope to a tripod for added stability. The minimum viewing distance is approximately 20 feet, making it suitable for close-up viewing as well. The rubber eyecup can be folded down to view the full field when wearing eyeglasses.

MODEL H8372

VARIABLE POWER

SPOTTING SCOPE

INSTRUCTIONS

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TS10175 PRINTED IN CHINA

Introduction

This high quality spotting scope is great for view-

ing wildlife and down range targets.

Inventory

After all the parts have been removed from the

box, use the Parts Breakdown on the back of

this page to inventory the parts.

Viewing the sun or any source of strong light

with this scope could cause temporary or

permanent damage to the eyes. Never use

this scope to view sources of strong light.

Specifications

Magnifying Power ........................................ 9–27

Objective Lens Diameter ........................... 50mm

Ocular Angle ...................................................45°

Tripod Mount Thread ..................................

⁄4"-20

Minimum Viewing Distance ......................... 20 ft.

Weight w/o Tripod, Caps, or Case ...........1

⁄4 lbs.

Operation

1. Attach spotting scope to tripod.

2. Unscrew eyepiece lens cap from rubber eye-

cup, and remove objective lens cap.

Figure 1. Model H8372 components.

Tripod Mount

Rubber

Eyecup

Zoom

Ring

Focus

Ring

Objective

Lens

Sun

Shade

Note: The edge of the rubber eyecup (see

Figure 1) can be folded down to view the full

field when wearing eyeglasses.

3. To focus, slowly rotate focus ring until object

becomes clear.

Note: The minimum viewing distance is

approximately 20 feet.

4. Change magnification by rotating zoom ring.

Note: You may need to re-focus after chang-

ing magnification.

Care & Storage

When not in use, install the eyepiece and objec-

tive lens caps and place the scope in the protec-

tive case. Store the scope and tripod in a dry,

room-temperature environment.

NOTICE

Natural skin oil can permanently damage

the lens coating, causing a reduction in

viewing quality. Never touch the lenses with

your fingers.

Cleaning

Use compressed air or a lens brush to remove

any dust or debris from the lenses. To remove

dirt from the lenses, use a soft, clean cotton cloth

and lightly rub in a circular motion from the center

outward. For a more thorough cleaning, apply

a photographic-type lens fluid to the cleaning

cloth—not directly on the lens.

NOTICE

Using coarse fiber cloth or any paper prod-

uct can permanently scratch the lens sur-

face. Use only soft, cotton cloth to clean

the lenses.

If you need help with your new item, call our Tech

Support at: (570) 546-9663.

Parts Breakdown & List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PH8372001 SPOTTING SCOPE 9-27X50MM 4 PH8372004 EYEPIECE CAP

2 PH8372002 RUBBER EYECUP 5 PH8372005 OBJECTIVE LENS CAP

3 PH8372003 TRIPOD 6 PH8372006 PROTECTIVE CASE

Grizzly H8372 Owner's manual

Grizzly H8372 Owner's manual

Grizzly H8372 Owner's manual

Other documents