The TE-ID 500 E hammer drill is a small, handy tool which provides good service to ambitious DIY enthusiasts on screwdriving, drilling and hammer

drilling jobs everywhere in the home, workshop and garage. User-friendly tool change is assured by its high-quality quick-change drill chuck. The

infinitely adjustable drilling depth stop made of metal enables repeat drilling depths.

TE-ID 500 E

Impact Drill

Item No.: 4259610

Ident No.: 11024

Bar Code: 4006825591347

Features

Infinitely adjustable drilling depth stop made of solid metal-

Suitable for use in drill stands thanks to the 43mm clamping neck-

Delivered in a practical case-

Technical Data

- Mains supply 220-240 V | 50/60 Hz

- Power 550 W

- Number of gears 1

- Idle speed (gear 1) 0-3000 min^-1

- Impact rate (gear 1) 0-48000 min^-1

- Drill chuck 1.5 - 13 mm

- Dimensions single packaging 328 x 97 x 295 mm

- Pieces per export carton 4 Pieces

- Gross weight export carton 15 kg

- Dimensions export carton 330 x 330 x 280 mm

- Container quantity (20"/40"/40"HC) 3518 | 7400 | 0