The TE-ID 500 E hammer drill is a small, handy tool which provides good service to ambitious DIY enthusiasts on screwdriving, drilling and hammer
drilling jobs everywhere in the home, workshop and garage. User-friendly tool change is assured by its high-quality quick-change drill chuck. The
infinitely adjustable drilling depth stop made of metal enables repeat drilling depths.
TE-ID 500 E
Impact Drill
Item No.: 4259610
Ident No.: 11024
Bar Code: 4006825591347
Features
Small, light and handy hammer drill-
Easy changing of tools thanks to quick-change drill chuck-
Speed adjustment by the speed preselector to suit on the material-
Robust and long-lasting metal gear unit-
Additional handle with ribs for secure fastening-
Ergonomic soft grips for comfortable operation-
Infinitely adjustable drilling depth stop made of solid metal-
Suitable for use in drill stands thanks to the 43mm clamping neck-
Delivered in a practical case-
Technical Data
- Mains supply 220-240 V | 50/60 Hz
- Power 550 W
- Number of gears 1
- Idle speed (gear 1) 0-3000 min^-1
- Impact rate (gear 1) 0-48000 min^-1
- Drill chuck 1.5 - 13 mm
- Drilling capacity in wood 25 mm
- Drilling capacity in metal 8 mm
- Drilling capacity in concrete 10 mm
Logistic Data
- Product weight 1.7 kg
- Gross weight single packaging 2.91 kg
- Dimensions single packaging 328 x 97 x 295 mm
- Pieces per export carton 4 Pieces
- Gross weight export carton 15 kg
- Dimensions export carton 330 x 330 x 280 mm
- Container quantity (20"/40"/40"HC) 3518 | 7400 | 0
Illustrations can contain accessories, which are not included in standard extent of delivery
Illustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessory
Generated at: 16.10.2015 08:06
Page 1
