iiyama G-MASTER GB2760HSU-B1 User manual

Brand: iiyama

Model: G-MASTER GB2760HSU-B1

Type: User manual

ENGLISH

USER MANUAL

Thank you very much for choosing the iiyama

LCD monitor.

We recommend that you take a few minutes

to read this comprehensive manual carefully

before installing and switching on the monitor.

Please keep this manual in a safe place for

your future reference.

ENGLISH



 Wereservetherighttochangespecicationswithoutnotice.



All trademarks used in this user manual are the property of their respective owners.

We recommend recycling of used product. Please contact your dealer or iiyama

service center. Recycle information is obtained via the Internet, using the address:

http://www.iiyama.com

YoucanaccesstheWebpageofdierentcountriesfromthere.

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC

Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU

“RoHS Directive”.

The electro-magnetic susceptibility has been chosen at a level that gives correct operation in

residential areas, business and light industrial premises and small-scale enterprises, inside as

well as outside of the buildings. All places of operation are characterised by their connection to

the public low voltage power supply system.

IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands

Model No. : PL2760H

ENGLISH

TABLE OF CONTENTS

FOR YOUR SAFETY ............................................................................ 1

SAFETY PRECAUTIONS................................................................1

SPECIAL NOTES ON LCD MONITORS .........................................3

CUSTOMER SERVICE ...................................................................3

CLEANING ......................................................................................3

BEFORE YOU OPERATE THE MONITOR ..........................................4

FEATURES......................................................................................4

CHECKING THE CONTENTS OF THE PACKAGE ........................4

WALL MOUNTING ..........................................................................5

FITTING AND REMOVAL OF BASE ...............................................6

CONTROLS AND CONNECTORS..................................................7

CONNECTING YOUR MONITOR ...................................................8

COMPUTER SETTING ...................................................................9

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE ...............9

PANEL ROTATION ..........................................................................9

OPERATING THE MONITOR .............................................................10

ADJUSTMENT MENU CONTENTS .............................................. 11

POWER MANAGEMENT FEATURE .............................................20

TROUBLE SHOOTING ......................................................................21

RECYCLING INFORMATION .............................................................22

APPENDIX ........................................................................................23

SPECIFICATIONS

G-MASTER GB2760HSU ...............................23

DIMENSIONS

G-MASTER GB2760HSU .......................................24

COMPLIANT TIMING ....................................................................24

ENGLISH

FOR YOUR SAFETY 1

FOR YOUR SAFETY

WARNING

STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE

If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the

monitor and contact your dealer or iiyama service center immediately. Further use may be

dangerousandcancausereorelectricshock.

NEVER REMOVE THE CABINET

High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of

reorelectricshock.

DO NOT PUT ANY OBJECT INTO THE MONITOR

Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug

your monitor immediately and contact your dealer or iiyama service center. Using the monitor with

anyobjectinsidemaycausere,electricshockordamage.

INSTALL THE MONITOR ON A FLAT, STABLE SURFACE

The monitor may cause an injury if it falls or is dropped.

DO NOT USE THE MONITOR NEAR WATER

Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric

shock.

OPERATE UNDER THE SPECIFIED POWER SUPPLY

Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill

causemalfunctionandmaycausereorelectricshock.

PROTECT THE CABLES

Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy

objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.

ADVERSE WEATHER CONDITIONS

It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in

power may cause malfunction. It is also advised not to touch the plug in these circumstances as it

may cause electric shock.

SAFETY PRECAUTIONS

ENGLISH

2 FOR YOUR SAFETY

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or

smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe

sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not

place any heavy objects on the monitor, and that all cables are routed such that children may not

pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause

re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.

Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the

cabinetwillbeblockedandthemonitormayoverheatifthestandisremoved.Thismaycausere

or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft

material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal

cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable

itselfasthismaycausereorelectricshock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may

damage your computer.

CAREFUL! PROTECT YOUR HANDS AND FINGERS



Becarefulnottohurtyourngersorhandswhenyouchangetheheightortheangle.



Injurycanoccurifcareisnottakentoavoidngercontactwiththedisplaysbasewhenadjusting

theheight.(Justforheightadjustablemodel.)

REMARK FOR 24/7 USAGE

Thisproductisnotspecicallydesignedfor24/7usageinallenvironments.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.

Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)

away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour

is recommended as looking at the screen continuously can cause eye strain.

ENGLISH

FOR YOUR SAFETY 3

The following symptoms are normal with LCD monitors and do not indicate a problem.

NOTE



When you first turn on the LCD monitor, the picture may not fit in the display area

because of the type of computer that is used. In this case, adjust the picture position to

the correct position.



You may find slightly uneven brightness on the screen depending on the desktop

pattern you use.



Due to the nature of the LCD screen, an afterimage of the previous screen may remain

after switching the image, when the same image is displayed for hours. In this case, the

screencanberecoveredslowlybychangingtheimageorturningothePowerSwitch

for some hours.

SPECIAL NOTES ON LCD MONITORS

NOTE



If you have to return your unit for service and the original packaging has been

discarded, please contact your dealer or iiyama service center for advice or

replacement packaging.

WARNING



If you drop any materials or liquids such as water into the monitor when cleaning,

unplug the power cable immediately and contact your dealer or iiyama service center.

CAUTION



Forsafetyreasons, turn o the powerswitchandunplug the monitor before you

clean it.

NOTE



To protect the LCD panel, do not scratch or rub the screen with a hard object.



Never use any of the following strong solvents. These will damage the cabinet and

the LCD screen.



Touching the cabinet with any product made from rubber or plastic for a long time

may cause degeneration or loss of paint on the cabinet.

Thinner

Benzine

Abrasive cleaner

Spray-type cleaner

Wax

Acid or Alkaline solvent

CABINET

Stains can be removed with a cloth lightly moistened with a mild detergent solvent.

Then wipe the cabinet with a soft dry cloth.

LCD

SCREEN

Periodic cleaning with a soft dry cloth is recommended.

Don't use tissue paper etc. because these will damage the LCD screen.

CUSTOMER SERVICE

CLEANING

ENGLISH

4 BEFORE YOU OPERATE THE MONITOR

The following accessories are included in your package. Check to see if they are enclosed with

the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional

iiyamaoce.

The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using

a power supply higher than this rating, then a power cable with a rating of 10A/250V

must be used. However, all guarantees and warranties are void for any problems or

damage caused by a power cable not supplied by iiyama.

An approved power cable greater or equal to H05VVF, 3G, 0.75mm² must be used.



Power Cable*



HDMI Cable



USB Cable



Stand-Base



Screwforstandxing(3pcs)



Safety Guide



Quick Start Guide





BEFORE YOU OPERATE THE MONITOR

CHECKING THE CONTENTS OF THE PACKAGE

CAUTION

FEATURES



Supports Resolutions up to 1920 × 1080



High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness

400cd/m

(Typical)



Supports AMD Radeon FreeSync™ technology



Flicker - Free



Quick Response Time 1ms (Gray to Gray)



Blue Light Reducer



Digital Character Smoothing



2 × 2W Stereo Speakers



Power Management (VESA DPMS Compliant)



VESA Mounting Standard (100mm×100mm) Compliant



Keyhole for Security Lock

ENGLISH

BEFORE YOU OPERATE THE MONITOR 5



When you use with the wall mounting, in consideration of thickness of the mounting

stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the

monitor. Using the screw longer than this may cause electric shock or damage

because it may contact with the electrical parts inside the monitor.



Please check if the wall or ceiling can support the weight of the monitor before

mounting it.

WALL MOUNTING

WARNING

Screw

Chassis

Mounting Stage

ENGLISH

6 BEFORE YOU OPERATE THE MONITOR

FITTING AND REMOVAL OF BASE

CAUTION



Put the monitor on a stable surface. The monitor may cause injury or damage if it

falls or is dropped.



Do not give a strong impact to the monitor. It may cause damage.



Unplug the monitor before removal or installation to avoid an electric shock or a

damage.

Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.

Laythemonitoratonatablewithfrontfacedown.

Remove the ‘thumb screws’ to remove the base from the monitor.

Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.

Laythemonitoratonatablewithfrontfacedown.

Hold the monitor and install the Stand-Base.

Use the ‘thumb screws’ provided to secure the base to the monitor.

Put the monitor on a at surface. Press the stopper at

the back of the stand while pushing the monitor from the

top. Careful attention is required as the monitor is sprung

loaded and the stand may expand quickly.

Stopper

ThumbscrewsforStand-Basexing

Stand-Base

ENGLISH

BEFORE YOU OPERATE THE MONITOR 7

CONTROLS AND CONNECTORS

Power Indicator

Blue: Normal operation

Orange: Power Management

PowerSwitch()

Menu/SelectButton(ENTER)

ScrollUp/VolumeButton( / )

ScrollDown/ECOModeButton( / )

ExitButton(EXIT) 

InputSelectButton(INPUT)

Speakers

USB Downstream Connector ( )

Keyhole for Security Lock

You can fasten a security lock and cable to prevent the monitor from being removed

without your permission.

USB Upstream Connector ( )

DisplayPort

Connector(DP)

HDMIConnector(HDMI)

Cable Hole

Headphone Connector

(LINEOUT)

ACConnector( :Alternatingcurrent)( )

NOTE

<Front>

<Back>

ENGLISH

8 BEFORE YOU OPERATE THE MONITOR

CONNECTING YOUR MONITOR

Ensurethatboththecomputerandthemonitorareswitchedo.

Connect the computer to the monitor with the signal cable.

Connect the computer to the monitor with the USB Cable.

ConnectthePowerCabletothemonitorrstandthentothepowersource.

Turn on your monitor and computer.

[Example of Connection]

<Back>

NOTE



The signal cables used for connecting the computer and monitor may vary with the

type of computer used. An incorrect connection may cause serious damage to both

the monitor and the computer. The cable supplied with the monitor is for a standard

connector. If a special cable is required please contact your local iiyama dealer or

regionaliiyamaoce.



For connection to Macintosh computers, contact your local iiyama dealer or regional

iiyamaoceforasuitableadaptor.



Makesureyoutightenthengerscrewsateachendofthesignalcable.



The Class I pluggable equipment Type A must be connected to protective earth.



The socket-outlet shall be installed near the equipment and shall be easily accessible.



Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.

[ Collect Cables ]

Put the cables through the cable hole to bundle them.

Power Cable (Accessory)

Computer

HDMI Cable (Accessory)

AV Equipment

USB Cable (Accessory)

Mouse

Keyboard

DisplayPort Cable (Not Included)

ENGLISH

BEFORE YOU OPERATE THE MONITOR 9



Signal Timing

Change to the desired signal timing listed on page 24: COMPLIANT TIMING.

COMPUTER SETTING

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE



For optimal viewing it is recommended to

position yourself directly opposite to the full face

of the monitor, then adjust the monitor’s height

and angle to your own preference.



Hold the panel so that the monitor does not topple

when you change the monitor’s height or angle.



You are able to adjust the monitor's height up

to 130mm, angle up to 45° right and left, 22°

upward and 5° downward.



Do not touch the LCD screen when you

change the height or the angle. It

may cause damage or break the LCD

screen.



Careful attention is required not to pinch

your fingers or hands into the moving

part of the stand when you change the

height or the angle.



Injury can occur if care is not taken to

avoidngercontactwiththedisplays 

base when adjusting the height.

NOTE

PANEL ROTATION

Adjust the monitor’s height.

Rotate the panel 90°.

Portrait: Turn clockwise.

Landscape: Turn counter clockwise.



Attempting to rotate without fully extending

upward may cause damage to stand.



Video card for portrait display will be

required for rotating the image on the

screen.

Adjust the monitor’s angle to your preference.

NOTE

Monitor

Stand

45°

130m

90°

ENGLISH

10 OPERATING THE MONITOR

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the

COMPLIANT TIMING shown on page 24. You are also able to adjust the picture by following the button

operation shown below.

Press the ENTER Button to start the On Screen Display feature. There are additional

Menu items which can be switched by using the

/ Buttons.

Select the Menu item which contains the adjustment icon relating to the adjustment

you want to make. Press the ENTER Button. Then, use the

/ Buttons to

highlight the desired adjustment icon.

Press the ENTER Button again. Use the / Buttons to make the appropriate

adjustment or setting.

Press the EXIT Button to leave the menu, and the settings you just made would be

automatically saved.



When button operations are aborted during adjustment, On-Screen Display disappears when

thetimesetfortheOSDTimehaspassed.Also,presstheEXITbuttontoquicklyturnotheOn-

Screen Display.



Any changes are automatically saved in the memory when the On Screen Display

disappears.

TurningothepowershouldbeavoidedwhileusingtheMenu.



All adjustments have only one setting which applies to all signal timings.

NOTE

For example, to correct for OSD vertical position, select Menu item of Setup Menu and then

press the ENTER Button. Then, select OSD Vertical Position by using the

/ Buttons. An

adjustment page appears after you press the ENTER Button.

Then, use the

/ Buttons to change the OSD vertical position settings. The OSD vertical

position of the overall display should be changing accordingly while you are doing this.

Press the EXIT Button lastly, it ends, all changes are saved in the memory.

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

SETUP MENU

OSD HORIZONTAL POSITION

OSD VERTICAL POSITION

OSD TIME

OPENING LOGO

FREESYNC

OFF

ENGLISH

OPERATING THE MONITOR 11

ADJUSTMENT MENU CONTENTS

Adjustment Item Problem / Option Button to Press

Picture Adjust *

Too dark

Too bright

Brightness *

1,2,4

Contrast *

Too dull

Too intense

Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.

Contrast and Brightness adjustments are disabled when Adv. Contrast mode is activated.

Picture Adjust adjustment is disabled when i-Style Color is activated.

Brightness adjustment is disabled when ECO is activated.

Adv. Contrast

Increased Contrast Ratio

O

Typical Contrast Ratio

Overdrive

O/-2/-1/0/+1/+2

It will improve the gray level response time of the LCD panel.

A higher level results in a faster response time.

You can skip the Menu items and directly display an option setting screen by using the following

button operations.



ECO : Press the

Button when the Menu is not displayed.

Direct

Brightness of back-light is reduced.

O Normal

ECO

Mode1

Brightness of back-light is reduced more than Mode1.

Mode2

Brightness of back-light is reduced more than Mode2.

Mode3

Direct

Blue Light Reducer

O

Typical

Mode1

Blue light is reduced.

Mode2

Blue light is reduced more than Mode1.

Mode3

Blue light is reduced more than Mode2.

Black Tuner

From-5to+5

You can adjust Dark shades.

Gamma

You can set the Gamma.

1.8 / 2.2 / 2.6

Color Saturation

Too weak

Too strong

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

PICTURE ADJUST

CONTRAST

ECO

BLUE LIGHT REDUCER

ADV. CONTRAST

OVERDRIVE

MODE 3

MODE 1

OFF

BRIGHTNESS

BLACK TUNER

COLOR SATURATION

GAMMA

ENGLISH

12 OPERATING THE MONITOR

Input Source

Inputsourceisxed,notselectedautomaticallywhenHDMIandDisplayPortwhichare

selected.

NOTE

Adjustment Item

Problem / Option Button to Press

Input Select

Direct

You can skip the Menu items and directly display an option setting screen by using the following

button operations.



Input Select : Press the INPUT Button when the Menu is not displayed.

Direct

Search for an available input source and

select automatically.

Auto

SelecttheDigital(HDMI)input.

HDMI

SelecttheDigital(DisplayPort)input.

DisplayPort

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

INPUT SOURCE

AUTO

MANUAL

HDMI

DISPLAYPORT (DP)

SELECT

Manual

ENGLISH

OPERATING THE MONITOR 13

Adjustment Item Problem / Option Button to Press

Audio Settings

Volume

Too soft

Too loud

Mute Audio

Return the sound volume to the previous level.

Turnothesoundtemporarily.

O

MuteOnandOareswitchedasfollowsbypressingthe Button successively.

 OnO

NOTE

Direct

You can skip the Menu items and directly display an adjustment scale by using the following button

operations.



Volume : Press the

Button when the Menu is not displayed.

Direct

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

VOLUME

OPTIONS

MUTE AUDIO

OFF

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

ENGLISH

14 OPERATING THE MONITOR

Adjustment Item Problem / Option Button to Press

Color Settings

Color Settings are disabled when i-Style Color or Blue Light Reducer is activated.

Too weak

Too strong

User Preset

Bluish white

Red

Green

9300K

Reddish white

7500K

Greenish white

6500K

Blue

Color Temperature

Adjustment Item Problem / Option Button to Press

Store User Setting

User Modes

Save the settings of the screen adjustment. User Mode 1

Save the settings of the screen adjustment. User Mode 3

NOTE

Save the settings of the screen adjustment. User Mode 2

You can memorize your customized monitor settings.

The following settings can be memorized:

Contrast, Brightness, Overdrive, Adv. Contrast, ECO mode, Volume, Mute Audio, Color

Setting, i-Style Color, Sharp and Soft, Black Tuner, Video Mode Adjust

COLOR TEMPERATURE

9300K

7500K

6500K

USER PRESET

RED

GREEN

BLUE

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

STORE USER SETTINGS

USER MODES

USER MODE 1

ENGLISH

OPERATING THE MONITOR 15

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

MISCELLANEOUS

SHARP AND SOFT

HDMI RGB RANGE

FULL

I-STYLE COLOR

CINEMA

LIMITED

FULL

VIDEO MODE ADJUST

DIRECT DRIVE MODE

OFF

i-Style Color adjustment is disabled when Blue Light Reducer is activated.

Direct Drive Mode is not available when you select options other than Full and Aspect of “Video

Mode Adjust”.

Adjustment Item Problem / Option Button to Press

Image Adjust

Sharp and Soft

1 2 3 4 5 6

Youcanchangethepicturequalityfrom1to6(sharp

tosoft).

Press the

Button to change the picture quality in

numerical order. Press the

Button to change the

picture quality in reverse numerical order.

i-Style Color *

Standard

For general windows environment and monitor

default setting.

O

Return to a state set by color adjustment

except i-Style Color.

Text

For text editing and viewing in a word

processing environment.

Sport Game

For Sports game environment.

FPS Game

For FPS game environment.

Strategy Game For Strategy game environment.

Mode 1

Mode 3

Mode 2

Applies customized monitor settings.

HDMI RGB Range

Full

Limited

For full-range color scale signal

For limited color scale signal

Direct

You can skip the Menu items and directly display an option setting screen by using the following

button operations.



i-Style Color : Press the EXIT Button when the Menu is not displayed.

Direct

O

Direct Drive Mode *

Reduce the input-lag.

Typical

ChangingResolutionandRefreshrateorturningPowerO/OnmightdisabletheDirect

Drive function.

NOTE

ENGLISH

16 OPERATING THE MONITOR

Adjustment Item Problem / Option Button to Press

Image Adjust

Video Mode Adjust *

Expansion display

Full

Aspect *

Expansion display of Aspect

Dot by Dot *

17 inch

19 inch

19.5 inch

21.5 inch

23 inch

Display the picture dot by dot

Displaythepictureas17inchscreen(5:4)

Displaythepictureas19inchscreen(5:4)

Displaythepictureas19.5inchscreen(16:9)

Displaythepictureas21.5inchscreen(16:9)

Displaythepictureas23inchscreen(16:9)

23.6 inch

Displaythepictureas23.6inchscreen(16:9)

24 inch

Displaythepictureas24inchscreen(16:9)

When Direct Drive Mode is enabled, only Full and Aspect can be selected.

The option is not available with 16:9 resolution.

PICTURE ADJUST

INPUT SELECT

AUDIO SETTINGS

STORE USER SETTING

COLOR SETTING

IMAGE ADJUST

LANGUAGE

SETUP MENU

G-MASTER GB2760HSU

DISPLAY INFORMATION

RECALL

MISCELLANEOUS

SHARP AND SOFT

HDMI RGB RANGE

FULL

I-STYLE COLOR

CINEMA

LIMITED

FULL

VIDEO MODE ADJUST

DIRECT DRIVE MODE

OFF

Page is loading ...

iiyama G-MASTER GB2760HSU-B1 User manual

iiyama G-MASTER GB2760HSU-B1 User manual

iiyama G-MASTER GB2760HSU-B1 User manual

Related papers

Other documents