User Manual Basic Version Guide
Huawei Technologies Co., Ltd.
All rights reserved
User Manual Basic Version V1.0
Internal
2019-10-21
Huawei confidential. No spreading without permission.
Page 2 of 6
1 Product Introduction
Once the package is downloaded from support web-page, user will find below software and documents in the
downloaded zip file.
1. HiLink.app – (This can be used to install HiLink in MAC system)
2. User Manual Basic Version Guide(HiLink).doc (this document)
Here is the information on how to use these software to install HiLink in the MAC OS.
1.1 Install Procedure
1.1.1 privacy setting
a. Downloaded HiLink.app. to MAC system, Double click on “HiLink.app”
b.
User Manual Basic Version V1.0
Internal
2019-10-21
Huawei confidential. No spreading without permission.
Page 3 of 6
c.
User Manual Basic Version V1.0
Internal
2019-10-21
Huawei confidential. No spreading without permission.
Page 4 of 6
d.
a. Re-open the following prompt box,Click “open” button
User Manual Basic Version V1.0
Internal
2019-10-21
Huawei confidential. No spreading without permission.
Page 5 of 6
1.1.2 Installation steps
Please enter your system user name and password, then click on “ok” button
After the installation is complete, you can go to the installation directory to check whether the latest
installation version number is 22.001.33.03.03 (because the installation process is silent
installation, you cannot see the installation process)
User Manual Basic Version V1.0
Internal
2019-10-21
Huawei confidential. No spreading without permission.
Page 6 of 6
1.1.3 After installation finish, insert device will open the device’s homepage
Note: If the following page is displayed，please click Go to Home.
/
